Frigidaire 819042236-01 user manual

Summary of the content on the page No. 1

WALL SLEEVE INSTALLATION INSTRUCTIONS FOR
FRIGIDAIRE
THRU-THE WALL AIR CONDITIONERS
READ AND SAVE THESE INSTRUCTIONS
Check the contents of the accessories supplied with
our air conditioner as shown below:
To avoid risk of personal injury, property damage, or
product damage duetotheweightofthisdeviceand
sharp edges that may be exposed:
• Air conditioners covered in this manual pose an
excessive weight hazard. Twoormorepeopleare
needed to moveand install theunit.
To prevent injury or strain, use p

Summary of the content on the page No. 2

INSTALLATION HOW TO INSTALL 5. If thewall sleeve already has a reargrille, skip to step 7. If the wall sleeve does not have arear grille or 1. Identify the existing wall sleeve before installing Iouvered panel, install the plastic grille from the kit. the unit from thelisted below. Cut the plastic mesh to match the sleeve installed. Place the plasticgrille to theinside of thewall sleeve Wall Sleeve Dimensions(inches) Brand at the rear flange. Width Height Depth White-Westinghouse 16, 17-1/:. Fri

Summary of the content on the page No. 3

INSTALLATION 11.lnstallthe new unit intothe wall sleeve. 8.If you wish to keep the unit beoperatedathigher performance state, remove the steel rear grille and attach the plastic rear grille. The plastic grille will 12.To assemble trim, snapthe tab ofeach piece into minimize the recirculation of hot discharge air. the slot of the other piece asshown below. Remove the backing from the trim foamand stick thattothe inside of the trim as shown below. Horizontal Vertical Plastic rear grille Steel rear