Tripp Lite SmartPro SMART1500SLTXL user manual

Summary of the content on the page No. 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART1500SLTXL
SmartPro Tower UPS - Intelligent, line-interactive network power management system

Highlights

1500VA / 1.5kVA line-interactive extended run tower UPS system for networks
Sine wave output in AC and battery mode
Simultaneous communications via SNMPWEBCARD slot, HID enabled USB
and DB9 serial port
Free PowerAlert UPS monitoring software manages an unlimite

Summary of the content on the page No. 2

Line-interactive voltage regulation maintains selectable 120V nominal output during brownouts as low as 95V and overvoltages to 145V Enables continuous operation through blackouts, voltage fluctuations and surges Line-interactive automatic voltage regulation (AVR) provides 14% voltage boost during brownouts and a 12% voltage cut during overvoltages Standard internal battery set offers 16 min. runtime at half load (490W) and 6.75 min. at full load (980W) Runtime is expandable with the addition

Summary of the content on the page No. 3

Voltage regulation Automatic voltage regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without description using battery power, during brownouts to 95V and overvoltages to 145V Overvoltage At 120V, input voltages between 127-145V are reduced by 12% correction Brownout correction At 120V, input voltages between 95-108V are boosted by 14% LEDS ALARMS & SWITCHES Front panel LEDs Includes 10 front panel LEDs to indicate line/battery power status, over/undervolta

Summary of the content on the page No. 4

WatchDog Compatible with Tripp Lite's WatchDog Software to restore operation to locked equipment through soft reboot of compatibility application/OS or hard power off/on reboot of connected equipment; ideal for unattended kiosk applications LINE / BATTERY TRANSFER Transfer time from 4-6 milliseconds line power to battery mode Low voltage transfer Switches to battery power as line voltage decreases to 95 volts or less. Resets back to line power mode as line voltage to battery power increases to 1

Summary of the content on the page No. 5

SNMPWEBCARD For remote monitoring and control via SNMP, Web or telnet. Qty: [optional] Software WATCHDOGSW WatchDog Service Monitoring / Reboot Software Qty: [optional] USB Hubs/Accessories U022-010 USB Cable - 10-ft. USB 2.0 AB Gold Device Cable Qty: [optional] More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3848. ©2009 Tripp Lite. All Rights Reserved.