Tripp Lite OMNISMART1050 user manual

Summary of the content on the page No. 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: OMNISMART1050
Omni Smart UPS System- Line Interactive UPS Corrects Severe Brownouts and Overvoltages

Highlights
1050VA / 1.05kVA line interactive tower UPS
Maintains 120V nominal output over an input range of 75 to 147V
Workstation optimized features include USB monitoring port
Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)
2 year product warranty / $200

Summary of the content on the page No. 2

Supports a half load of 525VA for 23 minutes Automatic Voltage Regulation (AVR) circuits correct brownouts as low as 75 and overvoltages as high as 147 volts to normal 120 volt levels without using battery power Upright tower configuration uses only 51 square inches of floor or desktop space Includes 6 battery supported outlets, 6 foot AC line cord (all NEMA 5-15) USB port enables safe unattended shutdown without data loss during extended power failures, includes USB cable USB port supports mess

Summary of the content on the page No. 3

Voltage regulation Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without description using battery power, during brownouts to 75V and overvoltages to 147V Overvoltage Input voltages between 128 and 147V AC are reduced by 12% correction Direct pass through Input voltages between 108 and 127V AC are passed on to connected equipment unchanged Brownout correction Input voltages between 93 and 107V AC are boosted by 14% Severe brownout Input

Summary of the content on the page No. 4

Transfer time from 2-4 milliseconds line power to battery mode Low voltage transfer Switches to battery power as line voltage decreases to 75 volts or less. Resets back to line power mode as line to battery power voltage increases to 79V or higher. High voltage transfer Switches to battery power as line voltage increases to 147 volts or higher. Resets back to line power mode as line to battery power voltage decreases to 143V or less. SPECIAL FEATURES Cold Start Yes, inverter can be "cold started