Summary of the content on the page No. 1
Owner’s Manual
Monitored PDU
Zero U (Vertical) Format
*
*CE logo applies to models with IEC power inlet.
Important Safety Instructions
2
Installation
2
Features
6
Configuration and Operation
8
Technical Support
8
Warranty and Warranty Registration
9
Español
10
Français
19
1111 W. 35th Street • Chicago, IL 60609 USA
773.869.1234 • www.tripplite.com
Copyright © 2009 Tripp Lite. All rights reserved.
200904140 93-2899.indd 1 5/13/2009 4:10:12 PM
Warranty
Registration
Register online today fo
Summary of the content on the page No. 2
Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the installation, operation, and storage of this product. Failure to heed these instructions and warnings will void the product warranty. • The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise protection for connected equipment. • The PDU is designed for indoor use only in a controlled environment away from excess moisture
Summary of the content on the page No. 3
Installation continued Connecting the PDU 2-1 (Models with IEC power inlet only.) Select C models have a detachable power cord. Attach the included power cord to the PDU by inserting the A A IEC connector of the power cord into the IEC power inlet B located near the end of the PDU. C Use the included bracket to secure the power cord connection. Note: Optionally, a user-supplied power cord can be attached to the PDU by connecting it to the IEC inlet. Do not attempt to attach a user-s
Summary of the content on the page No. 4
Installation continued Networking the PDU Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label attached to the PDU enclosure. The MAC address is also printed on a label attached to the internal network card. 3-1 If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go to Step . 4-1 If you will assign a static IP address to the PDU manually, go to Step . If you are uncertain which method to use, contact you
Summary of the content on the page No. 5
Installation continued Networking the PDU continued 4-5 Configure PDU in Terminal Mode: After a brief pause, an initialization page should appear in the terminal emulation program. Press any key on the keyboard within 10 seconds to change the PDU settings. (If the 10-second period has elapsed, you can reboot the PDU by powering down completely and then restoring power.) Follow the sequence of responses below in order to assign an IP address to the PDU. The default terminal mode root pa
Summary of the content on the page No. 6
Features Input Plug Adapter (Select Models): Converts the twist-lock input plug to a straight-blade input plug. Power Inlet (Select Models): The IEC power inlet connects to the included power cord or a compatible user-supplied power cord. The inlet includes a bracket to secure the cord connection. Outlets (Vary by Model): During normal operation, the outlets distribute AC power to connected equipment. IEC-60320-C13 IEC-60320-C19 NEMA 5-15/20R Digital Load Meter (Ammeter): The total connecte
Summary of the content on the page No. 7
Features continued Mounting Brackets: Use these brackets to mount the PDU . Mounting Buttons: Attach the included mounting buttons to the PDU. Position the PDU as desired in the rack enclosure, align the buttons with the rack mounting slots, and slide the PDU into position. Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may not be approp
Summary of the content on the page No. 8
Configuration and Operation Remote Monitoring and Control The PDU provides remote monitoring and more via Web browser, telnet and SNMP-based Network Management Systems. For more information about configuration and operation of the PDU via the PowerAlert Web browser interface, refer to the SNMPWEBCARD User's Guide, included on the CD-ROM bundled with the PDU. Technical Support Telephone: 773.869.1233 8:00 AM - 6:00 PM CST Monday - Thursday 8:00 AM - 5:30 PM CST Friday (CST is Central S
Summary of the content on the page No. 9
Warranty and Warranty Registration LIMITED WARRANTY Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 2 years (except internal UPS system batteries outside USA and Canada, 1 year) from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under thi
