Schumacher PS-120A user manual

Summary of the content on the page No. 1

Schumacher Electric Corporation
Model PS-120A
OWNER’S MANUAL
®
MityMite Jump Starter & DC Power Source
THIS PRODUCT HAS A SEALED LEAD-ACID BATTERY INSIDE THAT SHOULD BE KEPT AT FULL CHARGE FOR LONGER LIFE.
RECHARGE WHEN FIRST RECEIVED (EVEN IF GREEN ‘FULL POWER’ LIGHT GLOWS), AFTER EACH USE AND EVERY 3 MONTHS.
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions
OPERATING INSTRUCTIONS MULTI-PURPOSE POWER SUPPLY
Warning: Failure to follow instructions may cause The PS-120A is a power source for

Summary of the content on the page No. 2

STORAGE MityMite can be stored in any position. The clamps are live and will produce arcing or sparking if they come in contact with each other. To prevent accidental arcing, always keep the clamps on the side ears when not using it to jump start a vehicle. All batteries are affected by temperature. The ideal storage temperature is at 70 degrees. Performance varies based on battery temperature conditions. LIMITED WARRANTY Schumacher Electric Corporation warrants your unit to be free from defect