Furman Sound AC-215 user manual

Summary of the content on the page No. 1

Summary of the content on the page No. 2

AC-215 / AC-210 E AC Power Conditioner Introduction Features Thank you for purchasing the Furman ● Advanced Linear Filtering Technology for AC-215 / AC-210 E Power Conditioner. For unequalled audio/video clarity over 30 years, Furman has pioneered the ● Series Multi-Stage Protection Plus for AC development and manufacturing of AC power surge protection with Extreme Voltage products for the most demanding audio, Shutdown and a TVZ MOV offers the video, and broadcast professionals. Furman’s hi

Summary of the content on the page No. 3

AC-215 / AC-210 E AC Power Conditioner 2. Your unit should not be used near water – for invalidate the warranty. example, near a bathtub, washbowl, kitchen 9. Do not attempt to service yourunit beyond sink, laundry tub, in a wet basement, near a what is described in this manual. All other swimming pool, etc. servicing should be referred to qualifi ed service personnel. 3. Do not place your unit near heat sources such as radiators, heat registers, stoves or Overview other appliances that prod

Summary of the content on the page No. 4

AC-215 / AC-210 E AC Power Conditioner Indicators Troubleshooting Extreme V Extreme Voltage Shutdown Indicator oltage Shutdown Indicator Symptom: No power to the AC outlets. The AC Series SMP+ circuit senses voltages that are high enough to cause damage to your Possible Cause: Circuit breaker has components, and shuts the power down before tripped due to excessive load. damage can occur. Action Needed: Unplug one piece of The Extreme Voltage Shutdown LED is equipment from the AC-215 /

Summary of the content on the page No. 5

AC-215 / AC-210 E AC Power Conditioner Installation The AC-215 / AC-210 E can be conveniently and inconspicuously mounted within an equipment rack or on the rear panel of your video display, using the included brackets. Refer to the illustrations below for instructions. The brackets can be positioned facing in or out as shown to best allow for different types of installations. - 5 -

Summary of the content on the page No. 6

AC-215 / AC-210 E AC Power Conditioner the Furman Connected Equipment Warranty claim form (call Furman at (707) 763-1010 to obtain the Warranty form). Furman reserves the right to review the damaged Furman product, the damaged connected Furman Sound, Inc. warrants to the original equipment, and the site where the damage purchaser of this product, the Furman AC-215 or occurred. All cost of shipping damaged equipment AC-210E, that the product will be free from defects to Furman for ins

Summary of the content on the page No. 7

AC-215 / AC-210 E AC Power Conditioner warranties contained herein are null and void if used damage in shipment, and that it is insured. in anyway with any of the aforementioned devices. THE FOREGOING IS IN LIEU OF ALL OTHER Service WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED All equipment being returned for repair must WARRANTIES OF MERCHANTABILITY AND have a Return Authorization (R/A) Number. FITNESS FOR A PARTICULAR PURPOSE. Furman does not warrant again

Summary of the content on the page No. 8

Specifi cations AC Current Capacity Input: 15 Amp capacity required (10 Amp for the AC-210 E) Output: 15 Amp RMS (both outlets combined) (10 Amp for the AC-210 E) AC Noise Attenuation Transverse (Differential) Mode >40dB from 10kHz to 100kHz >80dB from 100kHz to 1GHz (linear attenuation curve from 0.05 to 100Ω line impedance) Transient Voltage Surge 120VAC (230VAC for AC-210 E) Suppression Series Multi-Stage Protection Plus Non-Sacrifi cial with Zero Grou