Summary of the content on the page No. 1
POWER RELAY
1 POLE—20A (Contact Gap 3.0mm type)
RoHS compliant
RoHS compliant
FTR-K2G SERIES
n FEATuRES
l Contact gapmin. 3.0mm
l Full disconnection
l Pole, Form A
l Maximum inrush current20A (TV -8)
l HIGH INSULATION
Reinforcedinsulation
Insulation Distance between coil andcontact:
- Clearancemin. 8.0mm, Creepagemin. 9.5mm
- DielectricStrength: 5KV
-Surge Strength: 0KV
l HEATRESIST ANCE, FLAMMABILITY
ClassB ( 30°C) coil insulation,
Summary of the content on the page No. 2
FTR-K2G Series n PART NuMBERS Standard type: 1000mW OrderingPart Number Series Contact CoilV oltage Contact Material FTR-K2GAK005T 5 FTR-K2GAK006T 6 FTR-K2GAK009T 9 FTR-K2GAK02T 2 FTR-K2GAK08T 8 T: AgSnO 2 FTR-K2G form A (TV-8rated) FTR-K2GAK022T 22 FTR-K2GAK024T 24 FTR-K2GAK048T 48 FTR-K2GAK060T 60 FTR-K2GAK0T 0 n COIL DATA CHART Standard T ype 1000mW Coil Nominal Max.Coil Coil Resistance MustOperate Must Release Nominal Power 2 2 Voltage Voltage(VD
Summary of the content on the page No. 3
FTR-K2G Series n SPECIFICATIONS Item FTR-K2G2AK( )T Contact Arrangement form A(SPST -NO) Material AgSnO 2 Resistance (initial) Maximum 100 mΩ (at 6VDC, 1A) Rating (resistive) 20A /250 VAC Maximum Carrying Current* 25A Maximum Switching Power 5000VA Maximum Switching Voltage 440V AC 2 Minimum Switching Load* 00 mA, 5 VDC (reference value) Coil Nominal Power(20°C) Approximately 1000 mW Operate Power (20°C) Approximately 420 mW Operating Temperature -40ºC to +70ºC (no frost)
Summary of the content on the page No. 4
FTR-K2G Series n INSuLATION Item FTR-K2G Note Resistance Minimum 1,000 MΩ at500 VDC Dielectric betweenopen contacts 2,000 VAC(50/60 Hz) min. Strength between coil andcontacts 5,000 VAC (50/60 Hz)min. Surge Voltage (between coil andcontact) 0,000 V .2 x 50µsstandard wave Clearance/Creepagedistance 8.0mm/ 9.5mm Insulation (DIN EN61810-1 VDE0435) Voltage 250 V Pollution 3 Isolation materialgroup III a n SAFETY STANDARDS T ype Compliance Compliance rating UL
Summary of the content on the page No. 5
FTR-K2G Series n CHARACTERISTIC DATA Coil temperature rise Maximum switching power Operating range Coil temperature rise Maximum switching power Operating range 100 2.5 100 100 2.5 100 90 90 50 25A 50 AC resistive 25A 80 AC resistive 80 20 2 20 2 0A 70 0A 70 10 20A 10 20A 25A 60 25A 60 5 5 50 1.5 50 1.5 2 40 2 40 1 30 1 30 1 0.5 1 20 0.5 20 10 0.2 10 0A 0.2 0A 0 0.1 0.5 0.1 0 0.5 0 0.2 0.4 0.6 0.8 1.0 1
Summary of the content on the page No. 6
FTR-K2G Series n DIMENSIONS l Dimensions l Schematics (BOTT OMVIEW) 4 5 6 N O C O M N O C O M 2 1 3 Orientation mark Pre-Solder l PC board mounting 0.3 0. 8 0.8 1 1 hole layout (BOTT OMVIEW) 20 10 7.5 6-Ø 1.3 +0.3 +0.3 35 16 ( 2.7 ) 20 10 Unit: mm 6 0.5 +0.3 4 28 (4 .25) 7.5
Summary of the content on the page No. 7
FTR-K2G Series RoHS Compliance and Lead Free Relay Information 1. General Information l Relays produced after the specific date code that is indicated on each data sheet are lead-free now . All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www .fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter .pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please re
Summary of the content on the page No. 8
FTR-K2G Series Fujitsu Components International Headquarter Offices Japan Europe Fujitsu Component Limited Fujitsu Components Europe B.V . Gotanda-ChuoBuilding Diamantlaan 25 3-5,Higashigotanda 2-chome, Shinagawa-ku 232WV Hoofddorp T okyo 141, Japan Netherlands T el: (81-3) 5449-7010 Tel:(3 -23) 55609 0 Fax: (81-3) 5449-2626 Fax: (3-23) 5560950 Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com W eb: www .fcl.fujitsu.com W eb: emea.fujitsu.com/components/ North
