Summary of the content on the page No. 1
Dell Line-Interactive Rack UPS
1000W, 1920/1500W, and 2700/2300W
User's Guide
H919N, J718N, K792N, H928N, K802N, H945N, J727N
J735N, K811N
w w w . d e l l . c o m | s u p p o r t . d e l l . c o m
Summary of the content on the page No. 2
Notes and Warnings NOTE: A NOTE indicates important information that helps you make better use of your software. DANGER: A DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: A WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or injury. CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property dama
Summary of the content on the page No. 3
Table of Contents 1 Introduction Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Safety Warnings 3 Installation Inspecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Unpacking the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Identifying the UPS Rear Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Display Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Startup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Screen Locked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 UPS Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Event Log . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
6 UPS Maintenance UPS and Battery Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Transporting the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Storing the UPS and Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 When to Replace Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Testing Batteries . . . . . . . .
Summary of the content on the page No. 6
1 Introduction The Dell Line-Interactive Rack uninterruptible power system (UPS) protects your sensitive electronic equipment from basic power problems such as power failures, power sags, power surges, brownouts, and line noise. Power outages can occur when you least expect them and power quality can be erratic. These power problems have the potential to corrupt critical data, destroy unsaved work sessions, and damage hardware — causing hours of lost productivity and expensive repairs. With the
Summary of the content on the page No. 7
Providing outstanding performance and reliability, the UPS's unique benefits include: Buck and Boost voltage regulation that ensures regulated voltage to your load by correcting voltage fluctuations. Start‐on‐battery capability for powering up the UPS even if utility power is not available. Maintenance is simplified by allowing the safe replacement of batteries without powering down the UPS. Extended runtime with an optional External Battery Module (EBM) for 1500–2700W UPS models. 2700
Summary of the content on the page No. 8
Finding Information CAUTION: The Safety, Environmental, and Regulatory Information document provides important safety and regulatory information. What are You Looking For? Find It Here The user's guide for my UPS Dell UPS Disc The user's guide for the Dell Network Management Card Dell UPS Management Software NOTE: Documentation and software updates can be found at support.dell.com. Specifications Dell UPS User's Guide How to configure UPS settings The user's guide is available on the D
Summary of the content on the page No. 9
2 Safety Warnings CAUTION: Before performing the procedures in this document, read and follow the safety instructions and important regulatory information in your Safety, Environmental, and Regulatory Information document. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions that you should follow during installation and maintenance of the UPS and batteries. Please read all instructions before operating the equipment and save this manual for future re
Summary of the content on the page No. 10
Unpacking the cabinet in a low-temperature environment may cause condensation to occur in and on the cabinet. Do not install the cabinet until the inside and outside of the cabinet are absolutely dry (hazard of electric shock). If the UPS requires any type of transportation, disconnect the internal UPS batteries before transporting (see page 61). CAUTION: Observe the following instructions to help prevent a potentially hazardous situation which, if not avoided, may result in minor or moderat
Summary of the content on the page No. 11
WARNING: Additional instructions for Rack-Mounted Systems Your rack kit has been approved only for the rack cabinet provided. It is your responsibility to ensure that installation of the equipment into any other rack complies with all applicable standards. Dell disclaims all liability and warranties with respect to combinations of equipment with any other rack. Before installing your equipment in a rack, install all front and side stabilizers. Failure to install stabilizers can allow the rac
Summary of the content on the page No. 12
3 Installation This chapter explains: Equipment inspection Unpacking the cabinet UPS rear panels UPS setup and installation, including the External Battery Module (EBM) Remote Emergency Power-off (REPO) installation Initial startup Inspecting the Equipment If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for
Summary of the content on the page No. 13
Unpacking the Cabinet CAUTION: Unpacking the cabinet in a low-temperature environment may cause condensation to occur in and on the cabinet. Do not install the cabinet until the inside and outside of the cabinet are absolutely dry (hazard of electric shock). CAUTION: The cabinet is heavy (see page 65). Use caution to unpack and move the cabinet. Use care when moving and opening the carton. Leave the components packaged until ready to install. To unpack the system: 1 Open the outer carton and rem
Summary of the content on the page No. 14
2 With one person on each side, carefully lift the cabinet out of the outer carton using the handles on the cardboard and set it on a flat, stable surface (see Figure 3). Place the cabinet in a protected area that has adequate airflow and is free of humidity, flammable gas, and corrosion. Figure 3. Lifting the Cabinet 3 Discard or recycle the packaging in a responsible manner, or store it for future use. | 14 Installation
Summary of the content on the page No. 15
Identifying the UPS Rear Panels This section shows the rear panels of the Dell Line-Interactive Rack models. USB Port Four 5‐15 Receptacles (Load Segment 1) UPS Communication Bay INPUT 100 −120V~ Ground Screw Two IEC 320-C13 Receptacles REPO Ports RS-232 Port IEC-C14 Input Connector (Load Segment 2) Figure 4. 1000W, 100V/120V Rear Panel Two IEC 320-C13 USB Port Receptacles (Load Segment 1) UPS Communication Bay Ground Screw REPO Ports Two IEC 320-C13 Receptacles RS-232 Port IEC-C14 Input Connect
Summary of the content on the page No. 16
Six 5-15/5-20 and Two REPO Ports UPS Communication Bay IEC 320-C19 Receptacles EBM Connector Cover/Strain Relief Bracket (Load Segment 1) Ground Screw USB Port IEC-C20 Input RS-232 Port Two IEC 320-C13 Receptacles Connector (Load Segment 2) Figure 6. 1920W/120V, 1500W/100V Rear Panel Two IEC 320-C13 Six IEC 320-C13 REPO Ports UPS Communication Bay Receptacles Receptacles (Load Segment 1) (Load Segment 2) Ground Screw USB Port IEC-C14 Input RS-232 Port EBM Connector Cover/Strain Two IEC 320-C19 C
Summary of the content on the page No. 17
Output Circuit Breakers Two IEC 320-C13 EBM Connector Receptacles Cover/Strain Relief REPO Ports Bracket RS-232 Port (Load Segment 2) USB Port One L5-20, Two 5-15/5-20, and 2m, L5-30P Input Cord Two IEC 320-C19 Receptacles Ground Screw UPS (Load Segment 1) Communication Bay Figure 8. 2700W/120V, 2300W/100V Rear Panel Two IEC 320-C13 EBM Connector Receptacles Cover/Strain Relief REPO Ports USB Port Bracket (Load Segment 2) IEC-C20 Input Ground Screw Two L6-20 and RS-232 Port Connector Two IEC 320
Summary of the content on the page No. 18
Two IEC 320-C13 EBM Connector Receptacles Cover/Strain Relief REPO Ports USB Port Bracket (Load Segment 2) IEC-C20 Input Ground Screw Six IEC 320-C13 and RS-232 Port Connector Two IEC 320-C19 Receptacles UPS Communication (Load Segment 1) Bay Figure 10. 2700W, 230V Rear Panel Identifying the UPS Front Panel On/Off Button LCD Panel Scroll Button (Up or Back) Scroll Button (Down or Forward) Select Button Figure 11. The Dell Line-Interactive Rack UPS Front Panel | 18 Installation
Summary of the content on the page No. 19
UPS Setup The Dell Line-Interactive Rack UPS can be installed in 19-inch racks and needs only 2U of valuable rack space (3U for 2700/2300W UPS models). NOTE: No tools are needed to attach the rack rails to a round- or square-hole EIA rack. The 2700/2300W UPS models are designed for flexible configurations and can be installed in a rack or as a standalone cabinet. If you are installing the UPS in a rack, continue to the following section, “Rackmount Setup.” To install the 2700/2300W UPS as a stan
Summary of the content on the page No. 20
Unclip the right battery connector and move the connector out of the way. Pull the battery tray out using the plastic tabs and remove the battery tray (see Figure 13). Figure 13. Removing the Battery Tray 2 If installing additional UPSs, repeat Step 1 for each cabinet. NOTE: The instructions are the same for square-hole racks and unthreaded, round-hole racks. The rails fit both rack styles. The square-hole rack is shown in the illustrations. 3 Select the proper holes in the rail for positioning
