Peavey SP 5 user manual

Summary of the content on the page No. 1

™
SPECIFICATIONS SP 5
Mounting provisions:
This unit is not designed for
overhead suspension
Built-in SA-1 stand-mount adapter
incorporated and four large rubber
feet on bottom for
floor use
Dimensions (H x W x D):
Front:
27.63” x 20.56” x 16.5”
702 mm x 522 mm x 419 mm
Rear:
27.63” x 14.8” x 16.5”
702 mm x 378 mm x 419 mm
Net Weight:
56 lbs. (25.5kg)
Features
• Two-way, full-range sound
reinforcement system
• 15” Scorpion Plus HO woofer
with field-replaceable basket
• Rx

Summary of the content on the page No. 2

™ SPECIFICATIONS SP 5 ™ features Sound Guard III tweeter Description protection circuit and an advanced The new SP 5 features the Peavey ™ topology crossover with high Quadratic Throat Waveguide and performance components to an enclosure made from Baltic provide high power handling and birch plywood. The SP 5 is a two- reliability. way speaker system comprised of a ® high output 15” Scorpion Plus HO ® Sound Guard, Peavey’s proprietary woofer with a Kevlar -impregnated ™ hi

Summary of the content on the page No. 3

distortions vs. frequency are handling shall be 400 Watts, with Frequency Response plotted in figures 3 & 4 for two maximum program power of 800 This measurement is useful in power levels. Ten percent (10%) of Watts, peak power input of at determining how accurately a given rated input power and either one least 1,600 Watts and a minimum unit reproduces an input signal. percent (1%) of rated input power amplifier headroom of 3 dB. The The frequency response of the or 1 Watt, whichever i

Summary of the content on the page No. 4

™ SPECIFICATIONS SP 5 80304985 Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • www.peavey.com ©2004 Printed in the U.S.A. 03/04