Summary of the content on the page No. 1
The Bouncer Bluetooth Stereo Speaker
1
Summary of the content on the page No. 2
Welcome to JLab! Thank you for purchasing The Bouncer Bluetooth Speaker! Enjoy your music wirelessly from any smartphone, tablet, laptop, or other Bluetooth enabled device. Connect with non-Bluetooth devices via an aux in connector port. What is inside the box: Speaker Remote AC/DC Power Adapter Quick Start Guide The Bouncer Quick Start 2
Summary of the content on the page No. 3
Meet The Bouncer: 1 2 3 Front Buttons What to do: Button 1 - Power / Mode One click will turn The Bouncer on. While on, this button acts as a Mode button. When speaker is on, click once to switch between Bluetooth and Aux mode. Red light indicates power is on. Hold down this button for up to 5 seconds to turn off the speaker. Button 2 - Call Button When receiving a call, one click will answer the call and click again to end the call. The Blue indicator lig
Summary of the content on the page No. 4
The Bouncer's Back Ports Back ports: What to do: Power Input: Connect The Bouncer with the provided AC adapter to the correct power source. AUX Input Use your own aux cable to connect any non-Bluetooth compatible devices. USB Output Use your own USB cord for charging your mobile and Bluetooth devices while playing music. 4
Summary of the content on the page No. 5
5
Summary of the content on the page No. 6
User Guide Connecting with The Bouncer speaker is easy. Here's what you do: Turn The Bouncer on! 1. Before using The Bouncer, connect the speaker to the power adapter and plug it into the appropriate wall socket. 2. Press / MODE Button 1 to switch on. Pair with Bluetooth Devices Pairing occurs when two Bluetooth devices communicate with each other and establish a connection. The Bouncer has a Blue indicator light that tells you when it is in pairing mode. The blue light bli
Summary of the content on the page No. 7
If this is the first time you are pairing with your Bluetooth device: 1. Turn on your Bluetooth device. 2. Set your Bluetooth device to “discover” or "on" under your phone or tablet's Bluetooth Settings. 3. Please allow up to 15 seconds for your device to find The Bouncer. 4. Select the device named “The Bouncer ” to connect over Bluetooth. 5. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some devices also ask you to accept the connection. 6. Your
Summary of the content on the page No. 8
Making Calls The Bouncer includes a built-in mic and call control for hands-free calls. How to answer a call: 1. Make sure that your smart phone is connected to The Bouncer via Bluetooth. 2. When you receive a call, press the Phone Button 2 ( ) to answer. 3. If you need to select an audio source on your Bluetooth device for the call, manually choose the The Bouncer and proceed with the call through the speaker. Aux in Mode You can use any audio device with The Bouncer by conne
Summary of the content on the page No. 9
Troubleshooting Problem: Solution: Speaker Make sure your system is connected to a working power outlet. will not turn on One click should turn on the speaker. Paired Bluetooth If your device requires a passkey, make sure the one you entered device will not was correct (0000) connect Turn The Bouncer off and back on and try again. Remove The Bouncer from the pairing list on your Bluetooth device, and then pair the device and The Bouncer again. The Bouncer Turn off
Summary of the content on the page No. 10
Safety Information 4. Do not block any ventilation openings. The ventilation shall not be impeded by covering the ventilation openings with items, such as newspapers, table clothes, curtains, etc. 5.Do not install near any heat source such as radiators, heat registers, stoves, or other speaker (including amplifiers) that produce heat. 6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the othe
