Summary of the content on the page No. 1
snooze | dimmer
hour minute sleep
off | reset
EXB clock
alarm
IP28 IB
Mar 16, 2010
size: 178 x 178 (13 pcs)
color: Black
Model iP28
The Portable Speaker System
For Your iPhone & iPod
Questions? Visit www.ihomeaudio.com
Summary of the content on the page No. 2
Table of Contents Quick Start.................................................................................................................................................................... 2 Controls and Indicators / iP28 Display ..................................................................................................................... 3 Setting Up the iP28............................................................................................................................
Summary of the content on the page No. 3
snooze | dimmer hour minute sleep off | reset EXB clock alarm iP28 Quick start 1: AC power 2: batteries 3: inserts RESET TEST 2A /off DC 7.5V line in lock Select the dock insert for your iPhone or iPod model from the Attach AC adaptor cable to jack For portable operation, open table below and place insert in on back of the iP28 and plug the battery compartment on the dock. Never dock an other end into a wall socket to bottom of the unit. Insert 4 “AA” iPhone/iPod without the play and
Summary of the content on the page No. 4
Controls and Indicators Universal Dock EXB Button Sleep Button Clock Set Button Minute Set Button Alarm On-Off Hour Set Button hour minute sleep EXB clock alarm /Set Button snooze | dimmer Volume Up Button Alarm Reset/ Power Off Button Volume Down Button iPod Play/Pause Snooze/Dimmer Button Power ON Button DST Switch Back of Unit 2A /off DC 7.5V line in lock DC Jack Line in Jack Travel Lock/Off Button iP28 Display Time/Alarm Display PM Indicator EXB Indicator DST Indicator Alarm Ar
Summary of the content on the page No. 5
Setting Up the iP28 Connect iP28 to Power Source a) For home operation and to charge your iPhone or iPod, plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120VAC wall socket. Adaptor must be plugged in to charge iPhone/iPod. b) For portable operation, install 4 “AA” (LR6) batteries, 2 in each compartment on the bottom of the unit. Make sure polarity matches diagram in compartments. Install battery for Installing/Replacing Backup Battery Clock display ba
Summary of the content on the page No. 6
Using the iP28 Setting the Clock a) Depending on your location and the time of year, move the (Daylight Saving Time) Switch located inside the left battery compartment on the bottom of the unit to +1 to add one hour (a DST icon will appear on the display) or to -1 to subtract 1 hour. b) Press and hold the Clock Set Button until the display flashes. Press the Alarm Button to toggle between 24 hour (military) and 12 hour (standard) time display modes. c) Press the Hour Button to adjust
Summary of the content on the page No. 7
Listening and charging iPod/iPhone Playing and charging your iPhone or iPod a) After selecting and placing the proper insert for your iPhone or iPod model, gently dock iPhone/iPod in Dock. When docked, the iPhone or iPod will charge until fully charged while the iP28 is connected to an outlet with AC adaptor. Unit will not charge iPhone or iPod when operating on batteries. It will not overcharge iPhone/iPod. b) Press the Button to play iPhone/iPod, and again to pause. c) Press or
Summary of the content on the page No. 8
Using the Line-in Jack Use an audio patch cord (not included, available at www.ihomeaudio.com) to play nondocking iPod models or other audio devices through the iP28 Line-in Jack located on the back of the unit (one end in the device’s line out or headphones jack, the other in the iP28 line in jack). Make sure there is no iPod docked in the iP28 when using the line-in jack. a) Press play on your device then press the Button on the iP28. b) Press the or Button to adjust
Summary of the content on the page No. 9
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should no
Summary of the content on the page No. 10
Troubleshooting Symptom Possible Problem Solution Unit doesn’t respond Plug the AC adaptor into a wall outlet and plug the AC adaptor isn’t plugged into a wall outlet (no power) or the connector is not plugged into the connector into the supply jack on the unit power supply jack on the back of the unit Wall outlet is not functioning or switched off Plug another device into the same outlet to confirm the outlet is work
Summary of the content on the page No. 11
Troubleshooting Symptom Possible Problem Solution Make sure the iP28 is plugged into a working AC outlet to iPhone/iPod didn’t Operating iP28 on batteries. The iP28 only charge your iPhone or iPod charge charges iPhone/iPod while operating on AC power Remove your iPhone or iPod from the dock and check for iPhone or iPod is not docked properly obstruction on the connectors in the dock and on your iPhone or iPod. Then
Summary of the content on the page No. 12
One Year Limited Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service
