La Crosse Technology WS-9153U-IT user manual

Summary of the content on the page No. 1

TABLE OF CONTENTS
WS-9153U-IT
Topic Page
Wireless 915 MHz
Inventory of Contents/Additional Equipment 3
About WWVB 3
Radio-controlled Weather Station
Quick Set-Up Guide 4

Detailed Set-Up Guide
Instruction Manual
Battery installation 5
Program Mode

Program Sequence and Default Settings 6

Function Keys 6

Setting the LCD Contrast 7

Setting the Time Zone 7-8

Daylight Saving Time Setting 8
Radio-controlled Time Setting 9
12/24-hour Time Setting 9

Summary of the content on the page No. 2

DETAILED SET-UP GUIDE • If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the I. BATTERY INSTALLATION (When one temperature sensor is being used) frequency is changed to 920MHz and the learning is tried another 45 seconds. If still not successful the reception is tried for 45 seconds on 910MHz. This will also be done for re- 1. First, insert the batteries to the temperature sensor (see “A. Remote Temperature synchronization. Sensor” below). 2. Wi

Summary of the content on the page No. 3

VIII. TIME SETTING There are two methods by which the time and date can be set: A) Automatically via WWVB reception, or B) Manually. 8. Press and release the IN button to advance the day. A. WWVB (Remote Control Time) 9. Press and release the OUT button to advance the month. 10. Press and release the SET button to confirm and advance to the snooze This method requires you to do nothing, except wait for the signal to be received, and to select a setting. time zone. Reception

Summary of the content on the page No. 4

A. VIEWING THE INDOOR TEMPERATURE RECORDS The WS-9153U-IT is able to receive signals from 2 additional temperature sensors. 1. Press the IN button once. “MIN” appears above the indoor The following are instructions for the set-up of temperature sensor units with the WS- temperature and the LCD will flash, indicating that the minimum 9153U-IT. These extra sensors can be purchased through the same dealer as this temperature and humidity, and the time and date of occurrence of the unit. tempe

Summary of the content on the page No. 5

Problem: Hour is incorrect (minute and date are correct) Indoor Humidity checking interval: Every 15 seconds. Solution: Be sure correct time zone and daylight saving time settings are selected. Outdoor Temperature checking interval Every 4 seconds (Remote Temperature Sensor): Problem: The LCD is faint Outdoor Temperature reception Every 4 seconds. Solution: 1) Set the LCD contrast to a higher number (Weather Station): 2) Replace batteries Transmission Range: 330 feet (in open space).