La Crosse Technology WS-9730U-IT user manual

Summary of the content on the page No. 1

WS-9730U-IT Instruction Manual

Table of Contents

The Outdoor Temperature Sensor
 Remote transmission of outdoor temperature to Weather Station by

915 MHz

 Shower proof casing
Topic Page
 Wall mounting case (Mounting at a sheltered place. Avoid direct rain
Inventory of Contents 1
and sunshine)
Features 1

Setting Up 1

Battery Installation 1-2

Function keys 2

LCD Screen and Settings 2

Manual Settings 2-3

Weather Forecast and Tendency 2
SETTING UP:
Display

Summary of the content on the page No. 2

Section 2 - INDOOR TEMPERATURE, INDOOR HUMIDITY, DATE AND WEATHER GIRL ICON BATTERY CHANGE:  Display the current indoor temperature and humidity in normal display. It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these  Display the weather condition to be expected in form of 15 fancy weather symbols (featured by units (Battery life See Specifications below). Weather girl) which change their appearance depending on the air pressure develo

Summary of the content on the page No. 3

For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather Projection Station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any °F/°C TEMPERATURE UNIT SETTING better (with sunny icon) or worse (with r

Summary of the content on the page No. 4

915 MHz RECEPTION The Weather station should receive the temperature data within 5 minutes after set-up. If the temperature data is not received 5 minutes after setting up (not successfully continuously, the outdoor Indoor Relative display shows “- - -” ), please check the following points: Humidity % 1. The distance of the Weather station or sensor should be at least 1.5 to 2 meters away from any interfering sources such as computer monitors or TV sets. 2. Avoid positioning

Summary of the content on the page No. 5

To wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. WARRANTY INFORMATION 2. Clip the remote temperature sensor onto the bracket. La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this p