Honeywell TE532ELW user manual

Summary of the content on the page No. 1

TABLE OF CONTENTS

INTRODUCTION 3
PRODUCT OVERVIEW 4
BEFORE YOU BEGIN 8
BATTERY INSTALLATION 9
LOW BATTERY WARNING 9
GETTING STARTED 10
PLACEMENT OF THE UNITS 10
Long-Range
REMOTE AND INDOOR TEMPERATURE &
HUMIDITY 11
Weather Forecaster
AUTO-SCANNING 11
PROGRAMMABLE TEMPERATURE ALARM 12
COMFORT LEVEL INDICATORS 13
WEATHER FORECAST 13
MAXIMUM AND MINIMUM READINGS 14
LOST COMMUNICATION 14
TRANSMISSION COLLISION 15
WWVB RADIO CONTROLLED TIME 15
ATOMIC CLOCK 16
TIME AND CALENDA

Summary of the content on the page No. 2

A. WEATHER AND TIME IN EASY-TO READ DIGITS FRONT/REAR VIEW B. SNOOZE/LIGHT button • Stops the clock’s alarm temporarily B • Activates a backlight for 5 seconds C. CHANNEL button • Recalls a different remote sensor reading – 1,2 or 3 • Activates the remote channels auto-scan feature A • Activates the remote channels search D. MEM button • Toggles between current, minimum, maximum readings of the indoor and remote temperature & humidity • Clears the temperature and humidit

Summary of the content on the page No. 3

NOTE: When the temperature falls below freezing, the GETTING STARTED batteries in the outdoor remote sensor may have reduced WEATHER DISPLAY voltage supply and a shorter effective range. We After batteries are installed; remote sensor will transmit recommend using lithium batteries at temperatures of temperature and humidity data at 45 second intervals. The 32°F (0°C) and below. main unit may take up to two minutes to receive the initial readings. Upon successful reception, remote temperature

Summary of the content on the page No. 4

NOTE: The weather forecast accuracy is approximately 70%. COMFORT LEVEL INDICATORS The main unit display shows forecasted (predicted) not This product is capable of detecting and displaying the current conditions. The SUNNY icon indicates clear current indoor comfort levels of surrounding environment. weather, even when displayed during the night-time. The comfort level is displayed on the weather station portion of the main unit’s display. It is based on the combination of MAXIMUM AND MINI

Summary of the content on the page No. 5

MANUAL SETTINGS SETTING THE WEEKDAY (W) AND SINGLE DAY (S) It is necessary to set the desired US TIME ZONE. ALARMS TIME ZONE • Press ALARM button once to enter into the alarms setting • Press MODE button once so that the Day of the Week mode. The default alarm is a Weekday alarm (W). The abbreviation is displayed to the right of the time; for abbreviation “OFF” with a letter “W” next to it will be example: pm 2:37tu displayed, if the alarm has not been set previously • Se

Summary of the content on the page No. 6

SPECIFICATIONS Power Main Unit Main unit: 2 AA size (UM-3) 1.5V batteries (not included) Indoor Temperature Remote Sensor: 2 AAA size 1.5V batteries (not included) Proposed operating range : 23.0°F to 122.0°F Dimensions (-5°C to +50°C) Main unit: 3.5(L) x 8.02(H) x 1.14(D) inches Temperature resolution : 0.2°F (0.1°C) Remote sensor: 2.35(L) x 3.77(H) x 0.86(D) inches Indoor Humidity Proposed operating range : 30%RH to 80%RH FCC STATEMENT Humidity resolution : 1% This device complies wi