Summary of the content on the page No. 1
PORTABLE MEDIA PLAYER/RECORDER
QUICK START GUIDE
Unpacking Your Unit
442 Digital Media Computer AC / DC adapter
Support CD with manual and Earphone
Ulead conversion software
Summary of the content on the page No. 2
Line in/out cable (2) Mini USB cable Function Overview Front View/Control Buttons 1. POWER: Press the POWER button to turn the unit on or off. 2. VOLUME CONTROL: Press Vol+ to increase or Vol- to decrease the volume. 3. Headphone jack. 4. TV/LOCK: outputs the display on the screen of the Neuros 442 to your TV. You must first connect both the line in/out cable to the LINE OUT jack of the Neuros 442 and the RCA jacks (red for right audio, white for left au
Summary of the content on the page No. 3
7. BACK/EXIT: While the Neuros 442 is in “Play” mode, press this button to stop and return to the previous menu. When not in “Play” mode, press this button to return to the previous menu. 8. MENU: Press to enter the Setting Options menu. Note: each of the 7 categories has a different set of options as you press the Menu button. Power On and Off 1. Press and hold the Power button for 2~3 seconds to power the Neuros 442 on or off. 2. Automatic shut off takes place when the Neuros 44
Summary of the content on the page No. 4
1. From the main menu, use the Navigation Joystick (right and left arrows) to highlight the Video Player icon, then press Play/Pause to enter the Video Player directory. 2. Video content can be found in the “PVR (Personal Video Recordings)” folder and in “Video” or other appropriately-named folders. (You may choose to rename the folders to suit your needs.) When a video or audio item is recorded directly to the Neuros 442, it is automatically saved to a directory named with the current
Summary of the content on the page No. 5
Note: The Neuros 442 will appear as an external hard drive on your computer. While the Neuros 442 is connected to a PC, its display screen is locked so you will not be able to navigate through the menus of the unit. Setup for Playback from Video Player Within the Video Player category, you can choose how your files and folders will be played by adjusting the “Repeat” function. Press the Menu button to access this function. The default setting is “Folder”, which means that the Neuros 4
Summary of the content on the page No. 6
Note: The repeat function described in the Video Player section above is also valid for the Audio Player menu. Video Recording 1. Insert the single end of the supplied Line In/Out Cable to the Line In port on the top side of the Neuros 442 and insert the three (red, white, and yellow) connectors on the other end of the Cable into the corresponding colored ports for the device you will be recording from (the “source” such as cable box, VCR, DVD player, camcorder, etc). Make sure the cab
Summary of the content on the page No. 7
Note: If the “Low Battery!” message appears on the screen, the battery may run out during the recording. We recommend you plug the unit into AC power during recording whenever possible. 4. Pause Recording: You can pause the recording by pressing the Play/Pause button. You will resume the recording by pressing the Play/Pause button again. Note: If you press the BACK/EXIT button, you will stop the recording, not pause it. A new file will be created as you resume the recording. 5. Ti
Summary of the content on the page No. 8
Cable into the corresponding colored ports for the device you will be recording from (the “source” such as a CD player, TV, or other audio output device). The source device outputs may not be color-coded and could instead have text indicating which channel is “right” and which is “left.” 2. From the Neuros 442 main menu, use the Navigation Joystick to locate the Voice Recording icon, then press the Play/Pause button to select it and enter the Voice screen. Once you are in this screen you
Summary of the content on the page No. 9
Joystick and enter it by pressing the Play/Pause button. Then press the Menu button, scroll to “Copy” and press the Play/Pause button. Choose Yes when asked Copy Files? All the selected files will be copied into the destination folder you selected. b. To delete a file, highlight the file and press Play/Pause. Then press the Menu button. Scroll to Delete File and press Play/Pause. When asked if you want to Delete Files select Yes with the Navigation Joystick and press Play/Pause.
Summary of the content on the page No. 10
Options icon and scroll down using the Navigation Joystick to highlight “Update Firmware”, then hit the Play/Pause button. Top View AV IN (may also be labeled Line In): “AV” = Audio/Visual. Plug the single plug end of the cable here to connect for receiving audio or video input from an external source, e.g., CD player, DVD player, TV. AV OUT (may also be labeled Line Out): Plug the single plug end of the cable here to connect for sending audio or video output from
Summary of the content on the page No. 11
Specifications ” Display: 3.6 Slim Type Trans-reflective TFT Color LCD Luminance 230 cd / m2 White LED Backlight QVGA Resolution 320 x RGB x 240 Pixel Support Track Title, Artist display Storage: 2.5” 40 GB HDD Features: Video Player- Supports MPEG 4 / DivX 3.11, 4.0, 5.0/ WMV9 Video Recording - Supports MPEG 4 / DivX 5.0 Audio Player - Supports MP3 / ADPCM / WMA Audio Recording - Supports MP3 / ADPCM Photo Viewer
