Summary of the content on the page No. 1
7” Portable DVD Player
PDV-0744M
Operation Manual
Summary of the content on the page No. 2
Contents Safety Precautions ..................... 3 ■ Title Menu............................. 18 Precautions with Moisture .......... 5 ■ Previous and Next................. 18 Function Features ...................... 6 System Setup............................. 19 Parts Introduction ....................... 7 ■ General Setup....................... 19 Remote Control .......................... 8 ■ Speaker Setup...................... 20 Connections .........
Summary of the content on the page No. 3
Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient to constitute a risk of electric sho
Summary of the content on the page No. 4
Important Safety Instructions 1. Read these instructions. IMPORTANT FOR LASER PRODUCTS 2. Keep these instructions. 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. 3. Heed all warnings. Avoid direct exposure to beam. 4. Follow all instructions. 3. CAUTION: Do not open the top cover. There are no user service-able 5. Do not use near water. parts inside the unit. Leave all servicing to qualified service p
Summary of the content on the page No. 5
Precautions with Moisture Under the following circumferences, moisture may appear on the lens of the product, which is the most sensitive part of the DVD player: - The DVD player is suddenly moved from a cold place to a warm place. - A room is heated while the DVD player starts operating, or the DVD is placed by an air-conditioner. - In the hot summer season, the DVD player is moved from an air-conditioned room to a hot, damp place to be used. - The DV
Summary of the content on the page No. 6
Function Features 1. EXCELLENT SOUND 7. LAST MEMORY PLAYBACK Dolby Digital delivers great sound. Memorizes and continues playing from 2. HIGH RESOLUTION place stopp ed. MPEG2 decoding format achieves more 8. ON-SCREEN DISPLAY On-screen displays in your choice of than 500 lines of horizontal resolution. English/Spanish/French. 3. SPECIAL FUNCTIONS 9. AUDIO OUT Supports multi-angle, excessive
Summary of the content on the page No. 7
Parts Introduction DVD Player 1. OPEN button 14. Speaker 2. Remote sensor 15. Bright up/down 3. Disc cover 16. Color up/down 4. Lights red when the power switch 17. TFT Liquid Crystal Display is on. 18. Earphone/speaker volume knob 5. Lights green when the player is in 19. Earphone jack operation. 20. Audio/output/input and optical 6. ENTER button digital output jack 7. Direction buttons 21. Video
Summary of the content on the page No. 8
Remote Control 1. PWR button 5. ENTER button -Press to turn the player on or off. -Press to confirm the items or setting. 2. INFO button 6. SETUP button -Press for detailed information on the disc -Press to access the DVD player’s setup playing. menu. -Keep pressing to remove information 7. 0-9 number buttons from screen. -Select numbers by pressing these 3. TITLE button buttons. -Press to display tit
Summary of the content on the page No. 9
Remote Control 9. NEXT SKIP button -Press once to stop playback and then -Press to go to next chapter. press PLAY button to resume normal 10. SUBT button playback. -When a DVD is playing, press to select -Press the button twice to stop playback a subtitle language or to turn subtitles completely. off. 18. PLAY button 11. ANGLE button -Press to begin playback. -Press to access various camera angles 19. GOTO button (if the DVD disc contains multipl
Summary of the content on the page No. 10
Connections Connecting to a TV Audio/video connections 1. Always ensure that the DVD player, TV and any other electrical equipment you are connecting the DVD player to is switched off and unplugged from the power supply. 2. The easiest way to connect the DVD player to a television is via the supplied Audio/Video connections. Connect the audio/video cable from the DVD player to the TV’s audio/video inputs. Connecting to an Amplif
Summary of the content on the page No. 11
Playback Preparations Using the Remote Control 1. Referring to the drawing above, take the back cover off of the remote control and remove the empty battery receptacle. 2. Prior to shipping, a separating film was applied to the battery. Remove this film. 3. Insert the battery into the receptacle and insert the receptacle into the remote. 4. For best results, aim the remote directly at the player’
Summary of the content on the page No. 12
Playback Preparations Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: PLAYBACK TIME/ DISC LOGO DIAMETER PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 12cm 266 min (DS-SL) 484 min (DS-DL) DVD 41 min ( SS-SL ) 75 min ( SS-DL ) 8cm 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min CD 8cm 20 min MP3 12cm 600 min The operating method of some DVD discs is specified by the software maker. Please refe
Summary of the content on the page No. 13
Playback Preparations POWER ON/OFF Usage of Switching Power Adapter The player is supplied with a switching power adapter. 1. Connect AC adaptor to the side of the DVD player in the slot marked “Power In”. 2. Connect the rabbit joint end of the AC adaptor to the power cord. 3. Plug the two-prong end of the power cord to a grounded electrical socket. Note: Please turn player’s power off first and then unplug the powe
Summary of the content on the page No. 14
Using and Charging the Battery Pack Charge the Battery Pack before using it the first time. Charging time is normally about 4 hours. Do not charge the Battery Pack more than 8 hours as it could reduce service life. Normally, the Battery Pack can be charged approximately 300 times. When fully charged, the Battery Pack delivers 2.5 hours of continuous power. Battery Pack should be fully charged before initial use! 1. Attaching the Battery Pack Turn the player upside down on a smooth, cle
Summary of the content on the page No. 15
Detaching Battery Pack from the unit: If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming some power in STANDBY mode. This could lead to over discharging the battery. Make sure the power is turned off before detaching the Battery Pack. After detaching the battery pack, take care when handling the unit. 1. Slide and hold in position. Press the tab towards the front of
Summary of the content on the page No. 16
About Rechargeable Battery Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the bottom of the player. Under normal working conditions, the battery can be charged and discharged over 300 times. The properties of the rechargeable battery are 7.4 Volts, with a capacity of 4200Ah, interior lithium ionic electric circuit protection for recharge and discharge. If the battery is not used it will automatically discharge gradually w
Summary of the content on the page No. 17
Basic Operation Please read these instructions carefully before using your player for the first time. 1. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. 2. Press OPEN button on front panel to open the disc cover. 3. Remove the lens cover. 4. Load disc with the label facing up to prevent damage to the player or disc. 5. Close the disc cover. The player will automatically search for the disc and when
Summary of the content on the page No. 18
Basic Operation Stop During playback, press the STOP button on the remote control to stop playing. Press the PLAY button, then the player will play from the point where it stopped. Mode During playback, press the mode button on the control panel to change the aspect ratio on the screen. Title Menu 1. Press the TITLE button on the remote control during payback. The title menu will appear on the TFT screen. 2. Press (direction button) or the number buttons t
Summary of the content on the page No. 19
System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup. 2. Press (direction buttons) on the remote control to select a category. 3. All the items in the category will ap
Summary of the content on the page No. 20
System Setup 3. OSD Language There are five kinds of different OSD languages for selection. You can select it according to your preference. 4. SPDIF Output This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is Dolby Digital, then the digital audio output is also Dolby Digital. 5. Captions You can choose captions on o
