Summary of the content on the page No. 1
EVC MH LED General Information
Unpacking: Thank you for purchasing the EVC MH LED by Elation
Professional®. Every EVC MH LED has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the
Summary of the content on the page No. 2
EVC MH LED Safety Precautions EVC MH LED General Instructions To optimize the performance of this product, please read these For Your Own Personal Safety, Please Read and Understand This operating instructions carefully to familiarize yourself with the basic Manual Completely Before You Attempt To Install Or Operate operations of this unit. These instructions contain important safety This Unit! information regarding the use and maintenance of
Summary of the content on the page No. 3
REMOTE REMOTE REMOTE INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT SOUND CONTROL SOUND CONTROL SOUND CONTROL INPUT INPUT INPUT EVC MH LED Set Up EVC MH LED Set Up POWER POWER POWER Power Supply: The Elation Professional® EVC MH LED contains a Notice: Be sure to follow figures two and three when making your own automatic voltage switch, which will auto sense the voltage when it is cables. Do not use the ground lug
Summary of the content on the page No. 4
EVC MH LED Set Up EVC MH LED System Menu 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting stan- dard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversi
Summary of the content on the page No. 5
EVC MH LED System Menu EVC MH LED System Menu again. Press ENTER when you have made your desired setup. ADDR - DMX Address Setting. 1. Press the MENU, UP, or DOWN buttons until “ADDR” is dis- MANU - In this mode you are able to manually test the played, press ENTER. various functions; Pan and Tilt and Pan/Tilt Speed, color 2. The current address will now be displayed and flashing. Use temperature, LED intensity, zoom and focus. the UP and DOWN buttons to find yo
Summary of the content on the page No. 6
EVC MH LED System Menu EVC MH LED Operation Universal DMX Control: This function allows you to use a Elation® 2. The software version will now be displayed. Press MENU to universal DMX-512 controller to control the chases and patterns, exit dimmer and strobe. A DMX controller allows you to create unique programs tailored to your individual needs. 1. The EVC MH LED is a 12 channel DMX fixture. See page 13 for RSET - Use this function to
Summary of the content on the page No. 7
EVC MH LED DMX Traits EVC MH LED Connections Use a BNC video cable or RCA video cable, with RCA/BNC adaptor, to connect to a video converter or source such as Ela- tions’ EPV Image VSC. Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 13 Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 14
Summary of the content on the page No. 8
EVC MH LED Fuse Replacement EVC MH LED Warranty 2-YEAR LIMITED WARRANTY Locate and remove the unit’s power cord. Once the cord has been removed located the fuse holder located inside the power socket. A. Elation® Architectural hereby warrants, to the original purchaser, Elation® Professionals® products to be free of manufacturing defects in material and Insert a flat-head screw driver into the power socket
Summary of the content on the page No. 9
EVC MH LED Notes EVC MH LED Notes Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 17 Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 18
Summary of the content on the page No. 10
EVC MH LED Specifications Model: EVC MH LED Voltage: 100V ~ 240V 50~60Hz LED: 48 LEDs (24 Cool White & 24 Warm White) Power Consumption: 36W Beam Angle: 60 Degrees Dimensions: 8.14”(L) x 8.22”(W) x 9.6”(H) 207mm x 209mm x 246mm Weight: 8.3 Lbs. / 3.8 kgs. Fuse: 1 Amp Duty Cycle: None DMX: 12 DMX Channels Working Position: Any Safe, Secure Position Warranty: 2 Year (730 days) Auto Sensing Voltage: This fixture cont
