Summary of the content on the page No. 1
Sony Corporation Printed in China
Summary of the content on the page No. 2
3-861-414-11(1) CD Radio Cassette-Corder Operating Instructions CFD-V35 1998 by Sony Corporation
Summary of the content on the page No. 3
Information Warning For customers in the United States To prevent fire or shock hazard, do This equipment has been tested and found to not expose the player to rain or comply with the limits for a Class B digital moisture. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
Summary of the content on the page No. 4
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Additional Information 12 Using the display 20 Precautions 13 Locating a specific track 22 Troubleshooting 14 Playing tracks repeatedly 24 Maintenance (Repeat Play) 25 Specifications 15 Playing tracks in random order 26 Index (Shuffle Play) 16 Creating your own program (Program Play) Setting Up 18 Choosing the power sources 19 Adjusting the sound empha
Summary of the content on the page No. 5
Basic Operations Playing a CD 3 1,2 Connect the supplied AC power cord (see page 18). 1 Press 6 PUSH•OPEN/CLOSE down to open the CD compartment and place a CD on the CD compartment. With the label side up 2 Close the CD compartment. Display 3 Press ^ (direct power-on). The player plays all the tracks once. Playing time Track number 4 Basic Operations
Summary of the content on the page No. 6
Basic Operations Use these buttons for additional operations POWER VOL +/– 6 PUSH•OPEN/CLOSE ^ =/+ p Tip To Press Next time you want to Adjust the volume VOL +/– listen to a CD, just press ^. The player turns on Stop playback p automatically and starts playing the CD. Pause playback ^ Press again to resume play after pause. Go to the next track + Go back to the previous track = Remove the CD 6 PUSH•OPEN/CLOSE Turn on/off the player POWER Basic Operations 5
Summary of the content on the page No. 7
Listening to the radio 12 Connect the supplied AC power cord (see page 18). 1 Press FM or AM (direct power- Display on). 2 Turn TUNING to tune in a radio station. If the received FM stereo is too weak, the reception becomes monaural. 6 Basic Operations
Summary of the content on the page No. 8
Basic Operations Use these buttons for additional operations POWER VOL +/– To Press Adjust the volume VOL +/– Turn on/off the radio POWER To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM. For AM For FM Basic Operations 7
Summary of the content on the page No. 9
Playing a tape 2 1 Connect the supplied AC power cord (see page 18). 1 Press p6 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. With the side you want to play facing upward Display 2 Press (. The player turns on (direct power-on) and starts playing. 8 Basic Operations
Summary of the content on the page No. 10
Basic Operations Use these buttons for additional operations 0/) P p6 POWER VOL +/– Tip To Press Next time you want to Adjust the volume VOL +/– listen to a tape, just press (. The player Stop playback p6 turns on automatically and starts playing the Fast-forward or rewind the tape ) or 0 for the tape. side facing upward. Pause playback P Press the button again to resume play after pause. Eject the cassette p6 Turn on/off the player POWER Basic Operations 9
Summary of the content on the page No. 11
Recording on a tape 31 Connect the supplied AC power cord (see page 18). 1 Press p6 to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing upward 2 Select the program source you want to record. Display To record from the CD player, press CD and insert a CD (see page 4). To record from the radio, press FM or AM and tune in the station you want (see page 6). 10 Basic Operations
Summary of the content on the page No. 12
Basic Operations 3 Press r to start recording. (( is depressed automatically). Use these buttons for additional operations p6 P POWER Tips To Press • Adjusting the volume or Stop recording p6 the audio emphasis (page 19) will not affect Pause recording P the recording level. Press the button again to • For the best results, use resume recording. the AC power as a power source for Turn on/off the power POWER recording. • To erase a recording, proceed as follows: 1 Press TAPE until “TAPE” appear
Summary of the content on the page No. 13
The CD Player Using the display DISPLAY/ENTER You can check information about the CD using the display. Checking the total track numbers and playing time Check the display in stop mode. Total track numbers Total playing time Checking the remaining time Press DISPLAY/ENTER while playing a CD. To display Press DISPLAY/ENTER Remaining time on the Once current track* Remaining time on the CD Twice and the number of tracks left Playing time and the current Three times track number * For a track whose
Summary of the content on the page No. 14
The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a Number specific point in a track while playing a buttons CD. =/+ Note To locate Press You cannot locate a a specific track directly a number button of the specific track if “SHUF” track. or ”PGM” is lit in the display. Turn off the a point while listening to + (forward) or = indication by pressing the sound (backward) while playing p. and hold down until you find the point. Ti
Summary of the content on the page No. 15
Playing tracks repeatedly (Repeat Play) Number You can play tracks repeatedly in buttons normal, shuffle or program play modes (see page 16). MODE ( CD Tip 1 Press CD. To enjoy a short repeat play, use LOOP. 2 Press MODE (PLAY MODE on the player) As soon as you press repeatedly until the repeat mode you want and hold LOOP during appears in the display. play, the player starts a loop play of the part To repeat Select between the point a single track “REP 1” where you pressed LOOP and a point all
Summary of the content on the page No. 16
The CD Player Playing tracks in random order (Shuffle Play) You can play tracks in random order. MODE ( CD On the player 1 Press CD. 1 Press CD. 2 Press MODE repeatedly until “SHUF” appears in 2 Press PLAY MODE repeatedly until the display. “SHUF” appears in 3 Press ( to start shuffle play. the display. 3 Press ^. To cancel Shuffle Play Press MODE until “SHUF” disappears from the display. The CD Player 15
Summary of the content on the page No. 17
Creating your own program (Program Play) Number You can arrange the playing order of up buttons to 20 tracks on a CD. MODE ( CD On the player 1 Press CD. 1 Press CD. 2 Press MODE until “PGM” appears in the display. 2 Press PLAY MODE until “PGM” appears 3 Press the number buttons on the remote for the in the display. tracks you want to program in the order you want. 3 Press the = or You can program up to 20 tracks. + then press DISPLAY/ENTER for the tracks you want to program in Programed track t
Summary of the content on the page No. 18
The CD Player Tips To cancel Program Play • You can play the same Press MODE until “PGM” disappears from the program again, since display. the program is saved until you turn off the To check the order of tracks before play power or open the CD compartment. Press DISPLAY/ENTER. • The current program Every time you press the button, the track number will be erased if you appears in the programed order. open the CD compartment. To change the current program • You can record your own program. After
Summary of the content on the page No. 19
Setting Up Choosing the AC IN power sources You can use the AC power or batteries as a power source. Use the AC power source whenever you record since recording consumes much power. Battery compartment To a wall outlet Notes Connecting the AC power cord • When you operate the Insert one end of the supplied AC power cord to the player with the AC IN socket located at the rear of the player, and the batteries, you cannot other end to the wall outlet. turn on the player using the remote. • When you
Summary of the content on the page No. 20
Setting Up Adjusting the MEGA BASS PRESET SOUND sound emphasis MODE (Sound Mode/MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. On the remote Selecting the sound characteristic Press SOUND Press one of the PRESET SOUND MODE buttons to repeatedly to select the select the audio emphasis you want. audio emphasis you want. Choose To get OFF the whole dynamic range for music such as classical music ROCK powerful, clean sounds, emphasizing low and high range audio POP l
