Axor Starck 10230XX1 user manual

Summary of the content on the page No. 1

Installation instrucctions / warranty
Starck
10030XX1
Starck
10050XX1
10058XX1
Starck
10230XX1

Summary of the content on the page No. 2

Starck Two handle lavatory mixer Starck Two handle highriser 10030XX1 10050XX1 Starck Two handle highriser with lift rod and pop-up waste 10058XX1 Starck Two handle bidet mixer 10030XX1 2 3

Summary of the content on the page No. 3

10030XX1/ 10050XX1/ 2 10058XX1 3 1 4 5 6 10230XX1 5 7 8 Spare parts 1 Handle for cold / hot water 96318XXX 2 Color-ring cold / hot water 96319000 3 Handle fixing set 94184000 4 Stop unit 94149000 5 Aerator 94005XXX 6 Lift rod 94083XXX 7 Tube for lav/bidet mixer 30622210 Tube for Highriser 30630910 8 Fi

Summary of the content on the page No. 4

Assembly 1. Flush pipe lines thoroughly. 2. Place the mixer including the sealing washer in position on the basin / bidet. 3. Slip the slide washer, washer and collar nut over the threaded base and tighten the collar nut by hand. 4. Tighten screws. 5. Connect the supply pipes to the supply valves: hot-left; cold-right. 6. Connect the lift rod to the pop-up waste assembly (only 10030XX1, 10050XX1 and 10230XX1). The hot and cold supplies must be of equal pressures. hot warm Mounting Hole si

Summary of the content on the page No. 5

Install the pop-up drain plunger • Remove the plunger assembly. • Unscrew the drain outlet flange from the tee. plunger assembly • Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and height adjuster replace. • Install the white, flexible sealing gasket to the flange. Sit it in the sink outlet. • From under the sink, install the black mack gasket, white friction ring , and retainer nut to drain outlet flange the flange. Do not tighten the nut against the b

Summary of the content on the page No. 6

Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose. Always follow the manufacture

Summary of the content on the page No. 7

Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. („Hansgrohe“). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original consumer purchaser only. WHAT IS COVERED BY THE WARRANTY This warranty covers only your Hansgrohe manufac

Summary of the content on the page No. 8

TO OBTAIN WARRANTY SERVICE Contact your Hansgrohe retailer, or write to Technical Service at: Hansgrohe Inc. 1492 Bluegrass Lakes Parkway Alpharetta GA 30004 Or, call Hansgrohe toll-free at (800) 334-0455. In requesting warranty service, you will need to provide 1. The sales receipt or other evidence of the date and place of purchase. 2. A description of the problem. 3. Delivery of the product or the defective part, postage prepaid and carefully packed and insured, to Hansgrohe Inc. 1492 Bl