Summary of the content on the page No. 1
3-058-871-12 (1)
Digital
Video Camera
Recorder
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DCR-TRV Model No. AC-
Serial No. Serial No.
DCR-TRV320
DCR-TRV120/TRV320
©2000 Sony Corporation
Summary of the content on the page No. 2
Welcome! Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. For customers in the U.S.A. WARNING If you have any questions about this product, To prevent fire or shock hazard, do you may call
Summary of the content on the page No. 3
Getting started Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Summary of the content on the page No. 4
Table of contents Checking supplied accessories ....................... 5 Customizing Your Camcorder Changing the menu settings ......................... 64 Quick Start Guide ............................... 6 Resetting the date and time .......................... 71 Getting started “Memory Stick” operations Using this manual ............................................ 8 (DCR-TRV320 only) Step 1 Preparing the power supply ............ 10 Installing the battery pack ..................... 10 Usin
Summary of the content on the page No. 5
Getting started Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 12 3 45 6 7 89 0 qa 1 Wireless Remote Commander (1) 6 A/V connecting cable (1) (p. 27) (p. 128) 7 Shoulder strap (1) (p. 125) 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 11) 8 Lens cap (1) (p. 16) 3 NP-F330 battery pack (1) (p. 10, 11) 9 PC serial cable (1) (p. 91) DCR-TRV320 only 4 CR2025 lithium battery (1) (p. 106) The lithium battery is already installed
Summary of the content on the page No. 6
Quick Start Guide Quick Start Guide This chapter introduces you to the basic features of your camcorder. See the page in parentheses “( )” for more information. Connecting the power cord (p. 14) Use the battery pack when using your camcorder outdoors (p. 10). Open the DC IN jack cover. Connect the plug with its v mark facing up. AC power adaptor (supplied) Inserting a cassette (p. 15) 1 Open the lid of the 2 Insert a cassette 3 Close the cassette cassette compartment, into the cassette compartme
Summary of the content on the page No. 7
Quick Start Guide VTR MEMORY OFF CAMERA (CHARGE) VTR MEMORY OFF CAMERA (CHARGE) VTR MEMORY OFF CAMERA ( ) CHARGE Recording a picture (p. 16) 1 Remove the lens cap. 2 Set the POWER switch to CAMERA while pressing the small green button. 4 Press the red button. Your camcorder starts recording. To stop recording, press the red button again. 3 Open the LCD panel while pressing OPEN. Viewfinder The picture appears When the LCD panel is closed, use the on the LCD screen. viewfinder placing your eye ag
Summary of the content on the page No. 8
— Getting started — Using this manual The instructions in this manual are for the two models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder. The DCR-TRV320 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation are clearly indicated in the text, for example, “DCR-TRV320 only.” As you read through this manu
Summary of the content on the page No. 9
Getting started Using this manual Precautions on camcorder care •The LCD screen and the viewfinder are manufactured using high-precision technology. However, there may be some tiny black points and/or bright points (red, blue, green or white) that constantly appear on the LCD screen and in the viewfinder. These points occur normally in the manufacturing process and do not affect the recorded picture in any way. Effective ratio of pixels and/or screen are 99.99% or more. •Do not let your camcorde
Summary of the content on the page No. 10
Step 1 Preparing the power supply Installing the battery pack Install the battery pack to use your camcorder outdoors. Slide the battery pack down until it clicks. To remove the battery pack Slide the battery pack out in the direction of the arrow while pressing BATT RELEASE down. BATT RELEASE After installing the battery pack Do not carry your camcorder by holding the battery pack. If you do so, the battery pack may slide off your camcorder unintentionally, damaging your camcorder. 10
Summary of the content on the page No. 11
Getting started VTR MEMORY OFF CAMERA (CHARGE) Step 1 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (L series). (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack with the plug’s v mark facing up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. (4) Set the POW
Summary of the content on the page No. 12
Step 1 Preparing the power supply Until your camcorder calculates the actual remaining battery time “– – – – min” appears in the display window. While charging the battery pack, no indicator appears or the indicator flashes in the display window in the following cases: – The battery pack is not installed correctly. – The AC power adaptor is disconnected. – Something is wrong with the battery pack. Charging time Battery pack Full charge (Normal charge) NP-F330 (supplied) 150 (90) NP-F530/F550 21
Summary of the content on the page No. 13
Getting started Step 1 Preparing the power supply Playing time DCR-TRV120 Playing time Playing time Battery pack on LCD screen with LCD closed NP-F330 (supplied) 90 (80) 100 (90) NP-F530 145 (130) 165 (150) NP-F550 175 (160) 200 (180) NP-F730 300 (270) 335 (300) NP-F730H/F750 365 (325) 410 (365) NP-F930 475 (430) 535 (480) NP-F950 555 (500) 630 (570) NP-F960 660 (590) 740 (665) DCR-TRV320 Playing time Playing time Battery pack on LCD screen with LCD closed NP-F330 (supplied) 85 (75) 95 (85) NP-
Summary of the content on the page No. 14
Step 1 Preparing the power supply Connecting to a wall outlet When you use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. (1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on your camcorder with the plug’s v mark facing up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. 2,3 1 PRECAUTION The set is not disconnected from the AC power source (house curren
Summary of the content on the page No. 15
Getting started Step 2 Inserting a cassette We recommend using Hi8 /Digital8 video cassettes. (1) Prepare the power supply. (p. 10) (2) Open the lid of the cassette compartment, and press EJECT. The cassette compartment opens automatically. (3) Insert a cassette with its window facing out and the write-protect tab on the cassette up. (4) Close the cassette compartment by pressing the mark on the cassette compartment. The cassette compartment automatically goes down. (5) Close the lid of the c
Summary of the content on the page No. 16
VTR MEMORY OFF CAMERA VTR MEMORY ( ) CHARGE OFF CAMERA (CHARGE) — Recording – Basics — Recording a picture Your camcorder automatically focuses for you. (1) Remove the lens cap by pressing both knobs on its sides and attach the lens cap to the grip strap. (2) Install the power source and insert a cassette. See “Step 1” and “Step 2” for more information (p. 10 to 15). (3) Set the POWER switch to CAMERA while pressing the small green button. Your camcorder is set to the standby mode. (4) Open the
Summary of the content on the page No. 17
Recording – Basics Recording a picture Note on LOCK (DCR-TRV320 only) When you slide LOCK to the left, the POWER switch can no longer be set to MEMORY accidentally. The LOCK is released as a default setting. To enable smooth transition You can make the transition between the last scene you recorded and the next scene smooth as long as you do not eject the cassette if you turn off your camcorder. When you change the battery pack, set the POWER switch to OFF (CHARGE). If you leave your camcorder i
Summary of the content on the page No. 18
Recording a picture After recording (1) Set the POWER switch to OFF (CHARGE). (2) Close the LCD panel. (3) Eject the cassette. Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings. “T” side: for telephoto (subject appears closer) “W” side: for wide-angle (subject appears farther away) WT W T W T Zoom greater than 25× is performed digitally. To activate digital zoom, s
Summary of the content on the page No. 19
Recording – Basics Recording a picture To record pictures with the viewfinder – adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder come into sharp focus. Lift up the viewfinder and move the viewfinder lens adjustment lever. Indicators displayed in the recording mode The indicators are not recorded on tape. Remaining battery time indicator Format indi
Summary of the content on the page No. 20
Recording a picture Shooting backlit subjects – BACK LIGHT When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function. Press BACK LIGHT in CAMERA or MEMORY (DCR-TRV320 only) mode. The . indicator appears on the LCD screen or in the viewfinder. To cancel, press BACK LIGHT again. BACK LIGHT If you press EXPOSURE when shooting backlit subjects The backlight function will be canceled. Shooting in the dark – NightShot/Super Night
