Carrier 38APD025-130 user manual

Summary of the content on the page No. 1

38APS025-065
38APD025-130
Long Line Check Valve Accessory
50/60 Hz
Installation Instructions
Part No.: 38AP-900---011, 38AP-900---012, 38AP-900---013
SAFETY CONSIDERATIONS The kit consists of a liquid line check valve and a bypass
check valve to prevent charge migration to compressor.
When installing this accessory, observe precautions in the
literature and on any labels attached to the equipment, and all
INSTALLATION
other safety precautions that may apply.
• Follow all safety codes.
CAUTION
•

Summary of the content on the page No. 2

20.000 (508) BYPASS CHECK VALVE 3.715 ENSURE FLOW ARROWS (94) ARE AS DEPICTED TYP DIRECTION OF FLOW LIQUID LINE CHECK VALVE NOTE: Dimensions are in inches. Dimensions in () are in millimeters. Fig. 1 — Long Line Check Valve Accessory Dimensions (Part No. 38AP-900---011 Shown) 2

Summary of the content on the page No. 3

3 FT MAX FOR SHORT RISER 40RU a38-7098_gs LEGEND NOTES: 1. All piping must follow standard refrigerant piping techniques. Refer to Carrier System LLSV — Liquid Line Solenoid Valve Design Manual for details. NEC — National Electrical Code 2. All wiring must comply with the applicable local and national codes. TXV — Thermostatic Expansion Valve 3. Wiring and piping shown are general points-of-connection guides only and are not Piping intended for, or to include all details for, a specific install

Summary of the content on the page No. 4

a38-7099_gs NOTES: LEGEND 1. All piping must follow standard refrigerant piping techniques. Refer to Carrier System LLSV — Liquid Line Solenoid Valve Design Manual for details. NEC — National Electrical Code 2. All wiring must comply with the applicable local and national codes. TXV — Thermostatic Expansion Valve Piping 3. Wiring and piping shown are general points-of-connection guides only and are not intended for, or to include all details for, a specific installation. *Field supplied. 4. I