Summary of the content on the page No. 1
3-861-898-33 (1)
Video Camera
Recorder
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
CCD-TR940
CCD-TR940
CCD-TR311/TR413/TR414
1
©1998 by Sony Corporation
Summary of the content on the page No. 2
Welcome! R Congratulations on your purchase of this Sony Handycam camcorder. With your Handycam you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing
Summary of the content on the page No. 3
Table of contents Adjusting the exposure Before you begin (CCD-TR940 only) .......................... 41 Using this manual ................................... 4 Superimposing a title ........................... 43 Checking supplied accessories .............. 6 Making your own titles ........................ 45 Recording with the date/time ............ 46 Optimizing the recording condition .. 47 Using the built-in light (CCD-TR413/ Getting started TR414/TR940 only) ........................ 48 Ins
Summary of the content on the page No. 4
Before you begin Using this manual The instructions in this manual are for the four models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The CCD-TR940 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation are clearly indicated in the text, for example, “CCD-TR940 only.” As you read through this manual, buttons and set
Summary of the content on the page No. 5
Before you begin Using this manual Note on TV color systems TV color systems differ from country to country. To view your recordings on a TV, you need an NTSC system-based TV. Precaution on copyright Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws. Precautions on camcorder care •The LCD screen and/or the color viewfinder are manufactured using high- precision technolo
Summary of the content on the page No. 6
Checking supplied accessories Check that the following accessories are supplied with your camcorder. 2 1 3 4 56 7 * or 1 Wireless Remote Commander (1) 5 R6 (size AA) battery for Remote (p. 76) Commander (2) (p. 76) CCD-TR413/TR414/TR940 only CCD-TR413/TR414/TR940 only 2 AC-L10A/L10B/L10C AC power adaptor 6 A/V connecting cable (1) (p. 19) (1), Power cord (1) (p. 8, 23) *for stereo model 3 NP-F330 Battery pack (1) (p. 7, 23) 7 Shoulder strap (1) (p. 77) 4 CR2025 Lithium Battery (1) (p. 53) The li
Summary of the content on the page No. 7
Getting started Getting started Installing and charging the battery pack Before using your camcorder, you first need to install and charge the battery pack. This camcorder operates only with the “InfoLITHIUM” battery pack. “InfoLITHIUM” is a trademark of Sony corporation. Installing the battery pack (1) While pressing BATT RELEASE, slide the lower battery terminal cover in the direction of the arrow. (2) Install the battery pack in the direction of the $ mark on the battery pack. Slide the batte
Summary of the content on the page No. 8
Installing and charging the battery pack Charging the battery pack Charge the battery pack on a flat surface without vibration. The battery pack is charged a little in the factory. (1) Open the DC IN jack cover and connect the supplied AC power adaptor to the DC IN jack with the plug's 4 mark up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. (4) Slide the POWER switch to OFF. Remaining battery time is indicated by the minutes on the display wind
Summary of the content on the page No. 9
Getting started Installing and charging the battery pack Notes •“--- min” appears on the display until the camcorder calculates remaining battery time. •Remaining battery time indication in the display window roughly indicates the recording time. Use it as a guide. It may differ from the actual recording time. •If there is a slight difference in shape between the plug of power cord and the terminal of AC power adaptor, it is ignorable for their mutual connection and power supply. •Be sure to plu
Summary of the content on the page No. 10
Installing and charging the battery pack CCD-TR940 Battery NP-F330 NP-F530 NP-F550 NP-F730 NP-F750 NP-F930 NP-F950 pack (supplied) Continuous recording 125 (110) 215 (190) 250 (220) 430 (385) 510 (460) 680 (610) 780 (700) time* Typical recording 65 (55) 110 (100) 130 (115) 225 (200) 270 (240) 360 (320) 410 (370) time** Numbers in parentheses indicate the time when you use a normally charged battery. Battery life will be shorter if you use the camcorder in a cold environment. * Approximate contin
Summary of the content on the page No. 11
Getting started Inserting a cassette Make sure that the power source is installed. When you want to record in the Hi8 system, use Hi8 video cassette H (CCD-TR940 only). (1) While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow. The cassette compartment automatically lifts up and opens. (2) Insert a cassette with the window facing out. (3) Close the cassette compartment by pressing the “PUSH” mark on the cassette compartment. The cassette compartment aut
Summary of the content on the page No. 12
S S T T A A N N D D B B Y Y K K Basic operations Camera recording Make sure that the power source is installed and a cassette is inserted and that the START/STOP MODE switch is set to . Before you record one-time events, you may want to make a trial recording to make sure that the camcorder is working correctly. When you use the camcorder for the first time, power on it and reset the date and time to your time before you start recording (p. 56). The date is automatically recorded for 10 seconds
Summary of the content on the page No. 13
Basic operations S S S T T T A A A N N N D D D B B B Y Y Y K K K Camera recording To stop recording momentarily [a] Press START/STOP again. The “STBY” indicator appears in the viewfinder (Standby mode). To finish recording [b] Press START/STOP again. Turn STANDBY down to LOCK and set the POWER switch to OFF. Then, eject the cassette. [a] [b] STBY 0:35:20 START/STOP START/STOP START/STOP Note There is a little wear on the battery pack which is installed with camcorder. However, for getting rem
Summary of the content on the page No. 14
Camera recording Note on recording When you record from the beginning of a tape, run the tape for about 15 seconds before starting the actual recording. This will ensure that you won’t miss any start-up scenes when you play back the tape. Notes on the tape counter •The tape counter indicates the recording or playback time. Use it as a guide. There will be a time lag of several seconds from the actual time. To set the counter to zero, press COUNTER RESET. •If the tape is recorded in SP and LP
Summary of the content on the page No. 15
Basic operations Camera recording Using the zoom feature Zooming is a recording technique that lets you change the size of the subject in the scene. For more professional-looking recordings, use the zoom function sparingly. “T” side: for telephoto (subject appears closer) “W” side: for wide-angle (subject appears farther away) W T W T W T Zooming speed (Variable speed zooming) Move the power zoom lever a little for a slower zoom, move it further for a faster zoom. When you shoot a subject using
Summary of the content on the page No. 16
S S T T A A N N D D B B Y Y K K Camera recording Selecting the START/STOP mode Your camcorder has three modes. These modes enable you to take a series of quick shots resulting in a lively video. (1) Set START/STOP MODE to the desired mode. : Recording starts when you press START/STOP, and stops when you press it again (normal mode). ANTI GROUND SHOOTING : The camcorder records only while you press down START/STOP so that you can avoid recording unnecessary scenes. 5SEC: When you press START/STO
Summary of the content on the page No. 17
Basic operations Hints for better shooting For hand-held shots, you’ll get better results by holding the camcorder according to the following suggestions: •Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb [a]. •Place your right elbow against your side. •Place your left hand under the camcorder to support it. Be sure to not touch the built- in microphone. •Place your eye firmly against the viewfinder eyecup. •Use the viewf
Summary of the content on the page No. 18
S T A N D B Y K Checking the recorded picture Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder. (1) While pressing the small green button on the POWER switch, set it to CAMERA. (2) Turn STANDBY up to STANDBY. (3) Press the – (Î) side of EDITSEARCH momentarily; the last few seconds of the recorded portion play back (Rec Review). You can monitor the sound from headphones (CCD-TR940 only). Hold down the – side of EDITSEARCH until the camcorder
Summary of the content on the page No. 19
Basic operations Connections for playback Connect the camcorder to your TV or VCR to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use house current for the power source. Connecting directly to a TV/VCR with Video/Audio input jacks When connecting the A/V connecting cable, make sure you connect the plug to jacks of the same color. Open the jack cover. With using the supplied A/V connecting cable, conn
Summary of the content on the page No. 20
Connections for playback If your TV or VCR is a monaural type – CCD-TR940 only Connect only the white plug for audio on both the camcorder and the TV or the VCR. With this connection, the sound is monaural even in stereo model. To connect to a TV or VCR without Video/Audio input jacks Use an RFU adaptor (not supplied). Using the AV cordless IR receiver – CCD-TR414/TR940 only Once you connect the AV cordless IR receiver (not supplied) having the LASER LINK mark to your TV or VCR, you can easily
