Epson STYLUS PHOTO 900 user manual

Summary of the content on the page No. 1

4
2 Attach the Turn On the Printer
4
2 Attach the Turn On the Printer
Paper Support 1 Plug the printer’s power cord into a grounded electrical outlet.
Paper Support
power button
®
EPSON Stylus Photo 900
Insert the paper support into its slots
on the back of the sheet feeder.
(To install the roll paper holders,
see your Printer Basics book.)
Start
Start
Here
Here
2 Press and release the power button to turn it on.
CAUTION: Never use an external switch, such as a wall switch
or power strip

Summary of the content on the page No. 2

® 3 Put the EPSON CD-ROM in your CD-ROM Macintosh OS X or DVD drive and wait a few seconds 6 Load Paper for it to be recognized. 6 Load Paper If you’re using Macintosh OS 8.6 to 9.x, see “Installing Your Printer Software” in the Printer Basics book. Windows Me: Various messages may flash briefly 1 Fan your paper and place it against 1 Make sure your printer is connected and turned on. on the screen. When this process is over, continue the right side of the sheet feeder Then turn on your Maci