Summary of the content on the page No. 17
1. On the menu that appears when you initially enter a mode, use fc to select “Set:”, and then press E. • This displays a setup screen of settings that apply to the current mode only. The content of the setup screen depends on what mode you are currently in. 2. Use fc to select the setup item whose setting you want to change. You can also select a setup item by inputting the applicable number. • See “Setup Screen Settings” below for information about configuring each setting. A Setup Screen Sett
Summary of the content on the page No. 18
A Configuring Settings 1 Payment:Compound Interest (CMPD) Mode, Amortization (AMRT) Mode This setting specifies the payment date. 1:Begin Beginning of period 2:End End of period 1. Use fc to select “Payment”, and then press E. 2. Press 1(1:Begin) or 2(2:End) to select the setting you want. •You can also use fc to select a setting and then press E. 2 Date Mode: Simple Interest (SMPL) Mode, Day Calculation (DAYS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies the number of days in a
Summary of the content on the page No. 19
2. Press 1(1:CI) or 2(2:SI) to select the setting you want. •You can also use fc to select a setting and then press E. 4 Periods/Y: Bond (BOND) Mode (FC-200V only) This setting specifies once a year (Annual) or twice a year (Semi-Annual) coupon payments. 1:Annual One coupon payment per year 2:Semi One coupon payment every six months 1. Use fc to select “Periods/Y”, and then press E. 2. Press 1(1:Annual) or 2(2:Semi) to select the setting you want. •You can also use fc to select a setting and the
Summary of the content on the page No. 20
6 Date Input: Day Calculation (DAYS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies either month, day, year (MDY) or day, month, year (DMY) as the date format. 1:MDY Month, day, year 06012006 (June 1, 2006) 2:DMY Day, month, year 01062006 (June 1, 2006) 1. Use fc to select “Date Input”, and then press E. 2. Press 1(1:MDY) or 2(2:DMY) to select the setting you want. •You can also use fc to select a setting and then press E. 7 PRF/Ratio: Break-Even Point Calculation (BEV) Sub- mode o
Summary of the content on the page No. 1
E
FC-200V
FC-100V
User's Guide
CASIO Worldwide Education Website
http://edu.casio.com
CASIO EDUCATIONAL FORUM
http://edu.casio.com/forum/
Summary of the content on the page No. 2
Important! CASIO COMPUTER CO., LTD. makes no guarantees concerning accuracy of the contents of this manual or their suitability for any commercial purpose or other particular purpose, or concerning the accuracy of calculation results (such as financial calculation simulation results) produced by this calculator. Financial calculation rules and practices can differ according to country, geographic area, or financial institution. It is up to you to determine whether the calculation resu
Summary of the content on the page No. 3
About this Manual • This User’s Guide covers use and operation of the CASIO FC-200V and FC-100V. Operations apply to both models, except in cases indicated by the text “FC-200V only”. • Keycap markings indicate what a key inputs or what function it performs. Example: 1, 2, +, -, A, etc. SHIFT ALPHA • Pressing the or key followed by a second key performs the alternate function of the second key. The alternate function is indicated by the text printed above the key. Alternate function VARS Y} Ke
Summary of the content on the page No. 4
• The following shows an example of how a key operation to select an on-screen menu item is represented in this User’s Guide. Example: 1(1-VAR) Indicates the menu item that is selected by the number key operation (1) before it. Note that this is not part of the actual key operation you perform. • The cursor key is marked with four arrows, indicating direction, as shown in the illustration nearby. In this User’s REPLAY Guide, cursor key operation is indicated as f, c, d, and e. Some examples in t
Summary of the content on the page No. 5
Initializing the Calculator Perform the following procedure when you want to initialize the calculator and return the calculation mode and setup to their initial default settings. Note that this operation also clears all data currently in calculator memory. 1.O19(CLR) 2. “All:EXE” (cf), then E. 3.E(Yes) 4.A •To cancel initialization without doing anything, press E(Cancel) instead of E(Yes). This setting: Is initialized to this: Calculation Mode COMP This setting: Is initialized to this: Payment
Summary of the content on the page No. 6
Safety Precautions Be sure to read the following safety precautions before using this calculator. Keep this manual handy for later reference. Caution This symbol is used to indicate information that can result in personal injury or material damage if ignored. Battery • After removing the battery from the calculator, put it in a safe place where it will not get into the hands of small children and accidentally swallowed. • Keep batteries out of the reach of small children. If accidentally swallow
Summary of the content on the page No. 7
Handling Precautions • Be sure to press the O key before using the calculator for the first time. • Even if the calculator is operating normally, replace the battery at least once every three years (FC-200V) or two years (FC-100V). A dead battery can leak, causing damage to and malfunction of the calculator. Never leave a dead battery in the calculator. • The battery that comes with this unit discharges slightly during shipment and storage. Because of this, it may require replacement sooner than
Summary of the content on the page No. 8
• Never press the keys of the calculator with a ballpoint pen or other pointed object. • Use a soft, dry cloth to clean the exterior of the calculator. If the calculator becomes very dirty, wipe it off with a cloth moistened in a weak solution of water and a mild neutral household detergent. Wring out all excess liquid before wiping the calculator. Never use thinner, benzene or other volatile agents to clean the calculator. Doing so can remove printed markings and can damage the case. E-6
Summary of the content on the page No. 9
Contents About this Manual ............................................ 1 Initializing the Calculator ................................ 3 Safety Precautions ........................................... 4 Handling Precautions ...................................... 5 Before Using the Calculator .......................... 10 kRemoving the Hard Case .................................... 10 kTurning Power On and Off ................................... 10 kAdjusting Display Contrast .....................
Summary of the content on the page No. 10
Financial Calculation ..................................... 42 kSimple Interest Mode ........................................... 42 kCompound Interest Mode .................................... 44 kCash Flow Mode .................................................. 50 kAmortization Mode ............................................... 55 kConversion Mode ................................................. 59 kCost/Sell/Margin Mode ........................................ 61 kDay Calculation Mode .....
Summary of the content on the page No. 11
Statistical Calculation .................................. 108 kStatistical Calculation Types .............................. 108 kInputting Sample Data ....................................... 108 kSTAT Calculation Screen .................................... 111 kUsing the STAT Menu ......................................... 112 Technical Information .................................. 134 kCalculation Priority Sequence ............................ 134 kStack Limitations ...........................
Summary of the content on the page No. 12
Before Using the Calculator k Removing the Hard Case Before using the calculator, slide its hard case downwards to remove it, and then affix the hard case to the back of the calculator as shown in the illustration below. k Turning Power On and Off • Press O to turn on the calculator. • Press 1A(OFF) to turn off the calculator. k Adjusting Display Contrast 1. Press s. 2. Use c to select “CONTRAST:EXE”, and then press E. This displays the contrast adjustment screen. Use d and e to adjust display c
Summary of the content on the page No. 13
k About the Display Your calculator has a 31-dot × 96-dot LCD screen. Example: Input expression Calculation result { Financial Calculation Mode k Display Indicators Sample Display: STAT This Means this: Page: indicator: The keypad has been shifted by pressing the 1 key. The keypad 7 will unshift and this indicator will disappear when you press a key. E-1 The alpha input mode has been entered by pressing the S key. 3 The alpha input mode will be exited and this indicator will disappear when you p
Summary of the content on the page No. 14
This Means this: Page: indicator: STAT The calculator is in the STAT Mode. E-108 360 360 days in a year. Simple interest for interest calcula- SI tions of odd (partial) months. Day, month, year (DMY) as the date DMY format. 7 The default angle unit is degrees. E-15 8 The default angle unit is radians. 9 The default angle unit is grads. A fixed number of decimal places is FIX in effect. A fixed number of significant digits SCI is in effect. Calculation history memory data is available and can be
Summary of the content on the page No. 15
Calculation Modes and Calculator Setup k Calculation Modes When you want to perform Press this Page: this type of operation: key: Simple interest calculations S E-42 Compound interest calculations c E-44 Cash flow calculations C E-50 Amortization calculations A E-55 E-28 General and function calculations m E-98 Statistical and regression a E-108 calculations Interest rate conversion calculations n E-59 Cost, selling price, or margin o E-61 calculations Day or date calculations D E-64 Depreciatio
Summary of the content on the page No. 16
A Displaying the Setup Screen There are two different ways to display the setup screen. • Pressing the s key • Selecting the “Set:” item on the menu screen that appears when you enter some modes. The following are the procedures you need to perform to access and use the setup screen using the above operations. FC-200V Important! All of the example procedures presented in this manual use the s key procedure to display the setup screen. To display the setup screen with the s key 1. Press the s key
