Summary of the content on the page No. 1
Mini-ITX EMB-945T
EMB-945T
®
Intel Core Duo/Solo Processor,
Up to 2.0 GHz
Mini-ITX
Marvell 88E8053 Ethernet
AC 97 Audio & Mini PCI
EMB-945T Manual 2nd Ed.
Mar. 2006
Summary of the content on the page No. 2
Mini-ITX EMB-945T Copyright Notice This document is copyrighted, 2006. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. Howeve
Summary of the content on the page No. 3
Mini-ITX EMB-945T Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. ® ® ® ® Intel , Pentium M, and Celeron M are trademarks of Intel Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are trade
Summary of the content on the page No. 4
Mini-ITX EMB-945T Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 1701440050 44-pin ATA33 Cable 1 1700200200 DVI Cable 2 1709100201 USB Cable 4 1701100206 Serial Port Cable 1 1700080180 TV-out Cable 2 1709070500 Serial ATA Cable 2 1702150150 Serial ATA Power Cable 1 9657666600 Jumper Cap 1 M166666006 CPU Cooling Fan 1 M20852T000 Rear I/O Bracket 1 Quick Installation Guide
Summary of the content on the page No. 5
Mini-ITX EMB-945T Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-4 1.3 Specifications ............................................................ 1-5 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ..................................................2-2 2.2 Location of Connectors and Jumpers ......................2-
Summary of the content on the page No. 6
Mini-ITX EMB-945T 2.17 Fan2 Connector(CN5)........................................... 2-13 2.18 Audio 5.1 Channel / SPDIF Connector(CN6) ...... 2-14 2.19 Internal Mouse Connector(CN7) ........................... 2-14 2.20 LCD Inverter Connector(CN8) .............................2-14 2.21 PCI Express Slot For AAEON(CN9) ..................... 2-15 2.22 LVDS(2)-LCD Connector(CN10)........................... 2-15 2.23 DVI Connector(CN11) .........................................2-16 2.24 L
Summary of the content on the page No. 7
Mini-ITX EMB-945T Chapter 4 Driver Installation 4.1 Installation……………………………………………..4-3 Appendix A I/O Information A.1 I/O Address Map......................................................A-2 A.2 Memory Address Map..............................................A-3 A.3 IRQ Mapping Chart..................................................A-3 A.4 DMA Channel Assignments.…………………………A-4 Appendix B Programming The Watchdog Timer B.1 Programming .......................................
Summary of the content on the page No. 8
Mini-ITX EMB-945T Chapter 1 General Information Chapter 1 General Information 1- 1
Summary of the content on the page No. 9
Mini-ITX EMB-945T 1.1 Introduction ® The EMB-945T adopts the latest Intel Core™ Duo processors and ® Mobile Intel 945GM Express chipset for better power-management capabilities and enhanced performance. EMB-945T with mobile-optimized Intel dual-core processors is the latest embedded motherboard designed to cope with increasingly heavily work-loaded embedded systems found in POS (Point-of-Sale) machines, automated kiosks, medical instruments, advanced automation for buildings and homes
Summary of the content on the page No. 10
Mini-ITX EMB-945T ® embedded motherboard with the Intel Core™ Duo processors in the IPC industry overcoming current limitations of processing speed and power consumption. 1 - 3 Chapter 1 General Information
Summary of the content on the page No. 11
Mini-ITX EMB-945T 1.2 Features ® • Supports Socket 478 or Onboard Intel Core Duo Processors up to 2.0 GHz (T2500)/ Intel® Core Solo Processors • Two SODIMM Slots Support DDR2 Memory up to 2GB • Supports 18/24/36/48-bit LVDS Panel, Share Memory up to 224MB with DVMT • One PCI-E 10/100/1000 Base-TX Ethernet and 6CH AC-97 Audio • Supports TypeII CFD • One PCI Slot, One PCI-E x 1 Slot and One Mini PCI Socket • Serial Port x 6, Parallel Port x 1, SATA x 2, ATA33 x 1,USB 2.0 x 6, Digita
Summary of the content on the page No. 12
Mini-ITX EMB-945T 1.3 Specifications System ® Processor Supports Socket 478 or onboard Intel Core Duo Processors up to 2.0 GHz with ® FSB 667 MHz (T2500)/ Intel Core Solo Processors System Memory DDR II SODIMM Socket x 2, total up to 2GB ® Chipset Intel 945GM + ICH7M I/O Chipset ITE 8712 + Fintek F81216D Ethernet Marvell 88E8053 RJ-45 x 1 BIOS Award Plug & Play BIOS - 512KB ROM Watchdog Timer ITE 8712 H/W
Summary of the content on the page No. 13
Mini-ITX EMB-945T Solid Storage Disk Type II CompactFlash™ slot x 1 Expansion Interface One PCI slot, One PCI-E(x1), One Mini PCI socket Power Requirement ATX (+3.3V, +5V, +12V) Board Size 6.7”(L) x 6.7”(W) (170 mm x 170 mm) Operating Temperature 32˚F~ 140˚F (0˚C ~ 60˚C) Display ® Chipset Intel 945GM ® VGA/LCD Controller 1. Intel 945GM integrated VGA, Share memory up to 224MB with DVMT , LCD supports 18/36-bit LVDS 2. Chrontel
Summary of the content on the page No. 14
Mini-ITX EMB-945T I/O MIO Six COM ports:(Four 5x2-pin header, Two D-sub onboard) COM 1/ 3/ 4/ 5/ 6: RS-232, COM 2: RS-232/RS-422/RS-485, Provide +5V & +12V output options on COM2 RI signals. IrDA Supports One IrDA header Audio Realtek ALC655 CODEC MIC-In/ Line-In/ Line-out, S/PDIF In/Out ATA Interface PATA-33 (44Pin) x 1, SATA x 2 USB Six USB 2.0 Ports Two 5x2 pin header for Internal, Two Type-A USB connector for
Summary of the content on the page No. 15
Mini ITX EMB-945T Chapter 2 Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters and further installation instructions, please refer to the user manual CD-ROM that came with the product. Part No. 2007945T10 Printed in Taiwan Mar. 2006 Chapter 2 Quick Installation Guide 2 - 1
Summary of the content on the page No. 16
Mini ITX EMB-945T 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic components on
Summary of the content on the page No. 17
Mini ITX EMB-945T 2.2 Location of Connectors and Jumpers Locating Connectors and Jumpers (Component Side) Chapter 2 Quick Installation Guide 2 - 3
Summary of the content on the page No. 18
Mini ITX EMB-945T Locating Connectors and Jumpers (Solder Side) Chapter 2 Quick Installation Guide 2 - 4
Summary of the content on the page No. 19
Mini ITX EMB-945T 2.3 Mechanical Drawing Component Side Chapter 2 Quick Installation Guide 2 - 5
Summary of the content on the page No. 20
Mini ITX EMB-945T Solder Side Chapter 2 Quick Installation Guide 2 - 6
