Summary of the content on the page No. 1
®
HP Pavilion V50
Display
Summary of the content on the page No. 2
® HP Pavilion V50 Display User's Guide
Summary of the content on the page No. 3
User’s Guide Notice The information contained in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but ® not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. HP assumes no res
Summary of the content on the page No. 4
Contents ♦ Introduction .....................................1 Regulatory Information.................... 13 For Your Safety .............................................................................2 FCC Statement .............................................................................. 13 X-Ray Radiation Notice .............................................................14 Installation ........................................... 5 General Notice ....
Summary of the content on the page No. 5
iv HP Pavilion V50 Display User’s Guide
Summary of the content on the page No. 6
Introduction ♦ Front-panel controls The HP Pavilion V50 Display is a high-resolution, multiscan color monitor designed for use with HP ♦ Support for high refresh rates to reduce screen Pavilion and other computers. flicker and eyestrain The display complies with EPA ENERGY STAR ® ♦ Tilt-and-swivel base standards and includes automatic power-management features. ♦ Plug and play compatibility Other features include: ♦ Support for VGA, SVGA, UVGA and a maximum nonin
Summary of the content on the page No. 7
W arning: To completely disconnect power from the For Your Safety display, you must remove the power cable from the power socket. For your safety and the protection of your display, ♦ To prevent electrical shock, do not remove the follow these precautions: back cover of the display. The cover should be ♦ Always connect the display to a grounded, removed only by qualified service personnel. three-prong power outlet. Use only the factory-supplied power cord. ♦ Position th
Summary of the content on the page No. 8
If any of the following conditions occur, unplug the display and contact a qualified service technician: ♦ The power cord or plug is frayed or damaged. ♦ You have spilled liquid into the display. ♦ The display has been exposed to rain or water. ♦ The display does not operate correctly when the operating instructions are followed. ♦ The display has been dropped, or the cabinet has been damaged. ♦ The performance of the display changes abruptly. Introduction 3
Summary of the content on the page No. 9
4 HP Pavilion V50 Display User’s Guide
Summary of the content on the page No. 10
Installation Follow the instructions in this chapter to install your Unpacking the Display HP Pavilion V50 Display. When you unpack the display, make sure that you have the following items: ♦ The display with its attached video cable ♦ Tilt-and-swivel base ♦ Power cord Installation 5
Summary of the content on the page No. 11
3 Insert the seven tabs on the base pedestal into Installing the Base the seven slots found on the bottom of the monitor. Pedestal 4 Push the base pedestal toward the front of the 1 Turn the monitor upside down on a sturdy monitor until it snaps into position. surface. (Don't place it screen-side down; the glass can be scratched.) 2 Position the base pedestal with the latch facing the back of the monitor. 6 HP Pavilion V50 Display User’s Guide
Summary of the content on the page No. 12
4 Connect the video cable on the monitor to the 15-pin video graphics connector on the rear panel of the computer, and tighten the fastening screws. (If you have an HP Pavilion computer, this port is marked in orange. For other computers, check your computer manual for the video port location.) Note: Don't force the cable into the connector; line it up carefully so you don't bend the pins. Installation 7
Summary of the content on the page No. 13
Tilt speakers toward Connecting the Speakers front and push down The display is designed for use with speakers supplied with HP Pavilion computers. To connect the speakers: 1 Identify the left and right speakers. You can tell which side a speaker fits onto by its mounting pegs. The side of the speaker with mounting pegs fits against the side of the display. 2 Fit the pegs of the right speaker into the Refer to your computer setup poster for corresponding holes on t
Summary of the content on the page No. 14
Changing Display Settings Your Pavilion V50 Display is capable of displaying several different resolution settings and may be adjusted for different ambient lighting conditions (compatible resolutions are shown in the Technical Specifications section of this manual). Depending on the mode you choose in the Display Settings window on your PC, you may need to make minor adjustments for the image size and center. To make these adjustments, refer to the following table.
Summary of the content on the page No. 15
Front Panel Controls Icon Control Function Icon Control Function Pincushion Adjusts any tapering or bowing Vertical Position Centers image vertically of the sides Trapezoid Adjusts the top and bottom of Vertical Height Sizes image vertically the image to the same size Up/Down Increases or decreases the Horizontal Position Centers image horizontally setting for the selected function Resets all adjustments to Reset Horizontal Width Sizes image horizon
Summary of the content on the page No. 16
Adjusting Settings ♦ Push "select" to choose a function. ♦ Push keys with up or down arrows to increase or decrease the setting for the selected function. ♦ Push "select" to move to another function. ♦ Simultaneous pressing of keys with up and down arrows ("RESET") resets all adjustments to factory settings. Technical Specifications 11
Summary of the content on the page No. 17
Technical Specifications Monitor Specifications . CRT description 90º deflection, light transmission, Power consumption Less than 75 watts 57% phosphor, P22 medium short, 0.28 mm dot pitch Display Resolutions 640 ×480 (31.5 kHz/60Hz) (per VESA standards 640 ×480 (37.8 kHz/72Hz) (non-glare/antistatic, and guidelines) 640 ×480 (37.5 kHz/75Hz) MPR Cpmpliant) 720 ×400 (31.5 kHz/70Hz) CRT size 800 ×600 (35.2 kHz/56Hz) 15 in (38.1 cm) 800 ×600 (37.8 kHz/60Hz) Maximum
Summary of the content on the page No. 18
Regulatory Information ♦ Plug the computer into a different electrical outlet, so that FCC Statement the computer and the radio or television are on separate electrical circuits. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC ♦ Make sure that all your peripheral devices are also FCC Rules. These limits are designed to provide reasonable Class B certified. protection against harmful interference in a re
Summary of the content on the page No. 19
X-Ray Radiation Notice General Notice When operating, this product emits X-rays; however, it is Note: This display is a Class 1 LED product. well shielded and meets the safety and health requirements of various countries, such as the Radiation Note: As an ENERGY STAR Partner, Hewlett-Packard has Act of Germany and the Radiation Control for Health and determined that this product meets the ENERGY STAR Safety Act of the United States. guidelines for energy efficiency. Radiation emitted
Summary of the content on the page No. 20
Supplementary lnformation: Declaration of The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the CE-marking accordingly. Conformity 1) The product was tested in a typical configuration with a Hewlett Packard Personal Computer and Peripherals. Manufacturer's Name: Hewlett-Packard Company 2) This Device complies with Part 15 of the FCC Rules. Operation is Manufacturer's Address: 10500 Ridgeview Ct. subj
