Summary of the content on the page No. 1
May 2010
KVT315A KVT319A
KVT317A KVT319A-WIDE
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse
Combines a keyboard with integrated trackball
®
BL A CK BOX
or glidepoint mouse and 15", 17", 19", or 19" wide
LCD monitor into a drawer.
KVT319A-WIDE model with 19" wide-screen monitor is now available.
KVT315A, KVT317A, and KVT319A have a trackball mouse.
®
KVT319A-WIDE has a GlidePoint mouse.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
Custome
Summary of the content on the page No. 2
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD Trademarks Used in This Manual Black Box and the Double Diamond logo are registered trademarks, and ServTray and ServSwitch are trademarks, of BB Technologies, Inc. Centronics is a registered trademark of Centronics Corporation. GlidePoint is a registered trademark of Cirque Corporation. PS/2 is a registered trademark of International Business Machines Corporation. UL is a registered trademark of Underwriters Laboratories Inc.
Summary of the content on the page No. 3
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interf erence to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 o
Summary of the content on the page No. 4
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones
Summary of the content on the page No. 5
Table of Contents 1. Specifications ...................................................................................................................................................................6 2. Overview ...................................................................................................................................................................8 2.1 Introduction .....................................................................................................
Summary of the content on the page No. 6
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD 1. Specifications Approvals: ServView KVM Drawer: CE, FCC; ® Power supply: UL , TUV, CE Backlight: (4) cold cathode fluorescent tubes 2 Brightness (cd/m ): KVT315A, KVT317A, KVT319A: 250; KVT319A-WIDE: 300 Color: KVT315A, KVT317A: 16.2 million; KVT319A, KVT319A-WIDE: 16.7 million Contrast Ratio (Typical): KVT315A: 300:1; KVT317A: 350:1; KVT319A: 500:1 KVT319A-WIDE: 1000:1 Display Area: KVT315A
Summary of the content on the page No. 7
Chapter 1: Specifications Size: KVT315A, KVT317A: 1.8"H x 17.3"W x 17.3"D (4.6 x 43.9 x 43.9 cm); KVT319A: 1.8"H x 17.4"W x 18.9"D (4.6 x 44.2 x 48 cm); KVT319A-WIDE: 1.7"H x 23.6"W x 17.4"D (4.4 x 60 x 44.2) Weight: KVT315A: 41.8 lb. (19 kg); KVT317A: 44 lb. (20 kg); KVT319A: 48.4 lb. (22 kg); KVT319A-WIDE: 40 lb. (18 kg) 724-746-5500 | blackbox.com Page 7
Summary of the content on the page No. 8
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD 2. Overview 2.1 Introduction The ServView KVM Drawer (1U) with Trackball Mouse and 15", 17", or 19", LCD (KVT315A, KVT317A, KVT319A) combines a keyboard with integrated trackball mouse and monitor into a drawer. The ServView KVM Drawer (1U) with GlidePoint Mouse (KVT319A-WIDE) combines a keyboard with integrated GlidePoint mouse and 19" monitor into a drawer. All models feature a flip-up design, adjustable brackets, and a b
Summary of the content on the page No. 9
Chapter 2: Overview 2.3 Hardware Description 2.3.1 KVT315A, KVT317A, KVT319A Figure 2-1 shows the KVM drawer’s components. Table 2-1 describes these components. 6 4 5 3 7 9 2 8 1 Figure 2-1. The ServView KVM Drawer (KVT315A, KVT317A, KVT319A) assembly. Table 2-1. The ServView KVM Drawer’s components. Number Component ® 1 PS/2 keyboard with integrated trackball mouse 2 LCD keyboard tray 3 Class A active matrix TFT LCD panel 4 Analog to digital signal converter board 5 Rear
Summary of the content on the page No. 10
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD 2.3.2 KVT319A-WIDE 1 6 2 3 4 7 5 8 9 Figure 2-2. The ServView KVM Drawer (KVT319A-WIDE) assembly. Table 2-2. The ServView KVM Drawer’s components. Number Component 1 Carry handle to release the two-point lock 2 Two-point lock 3 LCD interchangeable module kit 4 LCD membrane 5 “One man” installation slides 6 Micro switch for screen auto power off 7 Membrane switch (KVM option) 8 Keyboard interch
Summary of the content on the page No. 11
Chapter 3: Installation 3. Installation 3.1 How to Use the Slides with the KVT315A, KVT317A, or KVT319A 1. Install each rear L-bracket using two fasteners shown in Figure 3-1. Leave the fasteners slightly loose. Fasteners Rear bracket Fasteners Rear bracket Figure 3-1. Installing the rear L-bracket to the LCD keyboard drawer. 2. Measure the front and rear mounting depth of the rack. 3. Align eash rear L-bracket to a suitable length and tighen the fasteners shown in Figure 3-2. Rear bracket Rear
Summary of the content on the page No. 12
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD Rack Rack LCD keyboard drawer Figure 3-3. Installing the LCD keyboard drawer into the rack. 3.2 How to Use the Slides with the KVT319A-WIDE 1. Attach the left and right mounting bracket to the rack’s 19" mounting rails. 2. Adjust the mounting bracket to fit your rack. 3. Install the (8) M6 screws and cup washers (included), but do not tighten them yet. Rear side Right bracket Left bracket Front side Figure 3-4. Attach the mount
Summary of the content on the page No. 13
Chapter 3: Installation 4. Pull out the left and right inner slide members. \ Inner slide member Inner slide member Figure 3-5. Pull out inner slide members. 5. Pick up the LCD tray. 6. Insert the LCD tray into the mounting bracket. 7. Pull and hold the left and right black arrow buttons on the rail. 8. Return the LCD tray to park position. Mounting bracket Figure 3-6. Inserting the LCD into the mounting bracket. 9. Using the included (4) M3.2 screws, attach the rear kit to the LCD tray. CAUTI
Summary of the content on the page No. 14
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD Front side M3.2 Rear screws kit Figure 3-7. Secure the rear kit to the mounting bracket. 10. Tighten the (8) M6 screws to complete the installation. M6 screw Figure 3-8. Complete the installation. Page 14 724-746-5500 | blackbox.com
Summary of the content on the page No. 15
Chapter 3: Installation 3.3 Connect to a Server via USB Interface Figure 3-9. Example of connecting a 4-in-1 USB cable to a server via a USB interface. Figure 3-10. Example of connecting a 4-in-1 combo KVM cable to a server via a PS/2 interface. 724-746-5500 | blackbox.com Page 15
Summary of the content on the page No. 16
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD 4. Operation 4.1 On-Screen Display Operation Figure 4-1. Membrane switches. Table 4-1. Switches and their functions. Icon Switch Function Power light Power light Green=On Orange=Power saving Power LCD Power on/off LCD OSD menu buttons Display the OSD menu Arrow keys Scroll through menu options and adjust the displayed control (to auto adjust, press the Exit button for five seconds. Exit button Exit the OS
Summary of the content on the page No. 17
Chapter 3: Installation Figure 4-2. OSD configuration page. Table 4-2. OSD configuration page menu functions. Icon Description I mage: Use to enter setup for brightness, contrast, color temp., red, green, and blue. Geometry: Use to enter setup for the auto adjust, H position, V posi- tion, phase, and clock. Video: Use to enter setup for color, tint, sharpness, noise reduction, DCDi, and TV. Audio: Use to enter setup for volume, bass, treble, balance, AVL, and mute. M isc: Use
Summary of the content on the page No. 18
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD 5. Troubleshooting 5.1 Calling Black Box If you determine that your ServView KVM Drawer is malfunctioning, do not attempt to alter or repair the unit. It contains no user- serviceable parts. Contact Black Box at 724-746-5500. Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if you have a complete description, including: • the nature and duration of the
Summary of the content on the page No. 19
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less. ® © Copyright
