Summary of the content on the page No. 1
Table of Contents
1. PRECAUTIONS FOR USE................................................ 34
2. DISPOSAL INSTRUCTIONS -
OUR ENVIRONMENT POLICY......................................... 35
3. SAFETY PRECAUTIONS.................................................. 36
4. GET TO KNOW YOUR OVEN .......................................... 37
5. BEFORE INSTALLATION ................................................. 38
6. DESCRIPTION OF FRONT PANEL CONTROLS............. 39
7. USING THE OVEN...................
Summary of the content on the page No. 2
Precautions for Use 1. PRECAUTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED STAFF IN COMPLIANCE WITH THE RELEVANT REGULATIONS. THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE AND COMPLIES WITH THE EEC DIRECTIVES CURRENTLY IN FORCE. THE APPLIANCE IS BUILT TO
Summary of the content on the page No. 3
Disposal instructions 2. DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations for the addresses of collection, recycling and disposal facilities. Never leave all or part of the packaging lying around. Packaging parts, and especially plastic bags, may represent a suffocation hazard
Summary of the content on the page No. 4
Safety precautions 3. SAFETY PRECAUTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTEREST AND TO ENSURE YOUR SAFETY, BY LAW ALL ELECTRIC APPLIANCES MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED STAFF, IN ACCORDANCE WITH THE RELEVANT REGULATIONS. OUR APPROVED INSTALLATION ENGINEERS GUARANTEE YOU A JOB WELL DONE. GAS OR ELECTRIC APPLIANCES MUST ALWAYS BE DISCONNECTED BY SUITABLY SKILLED PEOPLE. THE PLUG
Summary of the content on the page No. 5
Instructions for the User 4. GET TO KNOW YOUR OVEN T 50 5 100 140 250 220 180 A 6 2 3 4 DESCRIPTION OF OVENS OVEN LIGHTS OVEN SHELF ROTISSERIE MOTOR RUNNERS OVEN FAN CONTROL PANEL TOASTER DRAWER PIZZA PLATE PIZZA PLATE CAVITY LIFTING LEVER DESCRIPTION OF TOASTER HEATING UNITS TOASTER RACK SLOTS 2 TOASTER RACKS CRUMB TRAY TOASTER PILOT LIGHT 3 4 37
Summary of the content on the page No. 6
Instructions for the User 5. BEFORE INSTALLATION Never leave packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre. The inside of the appliance should be cleaned to remove all manufacturing residues. For further information about cleaning, see point "13. CLEANING AND MAINTENANCE". When the oven and toaster are used for the first time, they should be heated (with no food inside) to the maximum temperature for
Summary of the content on the page No. 7
Instructions for the User 6. DESCRIPTION OF FRONT PANEL CONTROLS All the appliance's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used. 2 3 5 4 A FUNCTION SELECTOR KNOB Turn the knob either way to select one of the following functions: PIZZA FUNCTION (ON SOME BOTTOM HEATING ELEMENT MODELS ONLY) + FAN (ON SOME MODELS ONLY) TOP + BOTTOM HEATING BOTTOM + ROUND HEATING ELEMENTS ELEMENTS GRILL ELEMENT + TOP ROUND HEATING
Summary of the content on the page No. 8
Instructions for the User THERMOSTAT KNOB The cooking temperature is selected by turning the knob clockwise to the required setting, between 50° and 250°C for normal settings and to the symbol for the pizza oven setting. THERMOSTAT LIGHT Lights up to indicate that the oven is heating up. Goes out when the set temperature is reached. Flashes at regular intervals to indicate that the temperature inside the oven is being kept constantly at the set level. ELECTRONIC PROGRAMMER This electron
Summary of the content on the page No. 9
Instructions for the User 7. USING THE OVEN 7.1 Precautions and General Advice All cooking operations must be carried out with the door closed. When the oven and toaster are used for the first time, they should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells. During cooking, do not cover the bottom of the oven with aluminium or tin foil, and do not place pans or trays on it
Summary of the content on the page No. 10
Instructions for the User 8. USING THE PIZZA FUNCTION This appliance is equipped with a function specially developed for cooking pizza with the special plate provided. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as described below. Set the oven functions knob on the symbol and the thermostat knob on the symbol. Preheat with these settings until the thermostat light goes out, then place the pizza on the special plate using the pizza shovel pro
Summary of the content on the page No. 11
Instructions for the User 9. USING THE TOAST FUNCTION This appliance is equipped with a compartment specially developed for toasting bread and sandwiches. This function is identified by the symbol on the oven functions knob. To toast foods in the toaster proceed as described below: 1 Release the toaster by pressing on its lower side. 2 Pull the toaster towards you to open it. 3 Once the toaster is open, take hold of the racks by the handles and lift them out. 4 Fit the bread or sandwiches for t
Summary of the content on the page No. 12
Instructions for the User 9.1 Precautions for use of the toaster � Never remove the slot structure inside the toaster � Never use the toaster in any way other than that described. � Never touch the heating elements inside the toaster after use for cooking. � Never carry out more than 10 consecutive toasting cycles. This might seriously damage the appliance and put its safety at risk. Wait at least one minute with the toaster open between one cycle and the next. 44
Summary of the content on the page No. 13
Instructions for the User 10. ELECTRONIC PROGRAMMER LIST OF FUNCTIONS TIMER BUTTON COOKING DURATION BUTTON END OF COOKING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON 10.1 Setting the time When the oven is used for the first time, or after an interruption in the electricity supply, the display flashes at regular intervals, showing . Press to stop the display flashing. Press the value modification keys or within 5 seconds to increase or decrease the setting by one minute for each pressur
Summary of the content on the page No. 14
Instructions for the User 10.2 Semiautomatic cooking This function only switches the oven or toaster off automatically at the end of the cooking time. Press the key and the display will light up showing the figures ; keep it pressed, and at the same time use the value modification keys or to set the cooking duration. A few seconds after the key is released, the count of the programmed cooking duration will start and the display will show the current time together with the symbols A and . 10.
Summary of the content on the page No. 15
Instructions for the User 10.5 End of cooking At the end of the cooking time the oven or toaster will switch off automatically and simultaneously (except for the toaster function) a buzzer will start to sound in on-off mode. After the buzzer is stopped, the display will return to showing the current time together with the symbol, indicating that the oven is again ready for use in manual mode. 10.6 Adjusting the buzzer volume The buzzer volume can be varied (3 settings) while it is in operation
Summary of the content on the page No. 16
Instructions for the User 11. ACCESSORIES AVAILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Roof liner: remove it to simplify cleaning inside the oven. Shelf: useful to support pans containing the food for cooking. Tray grid: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the grid above. Tongs: The tongs can be used either for removing hot trays or for taking out the pizza plat
Summary of the content on the page No. 17
Instructions for the User Pizza shovel: a convenient way of putting the pizza on the special plate in the oven. Toasting racks: the appliance comes complete with two toast racks. The racks must be placed inside the slots in the toaster. Each of these racks can take up to 2 toasted sandwiches. Bottom cover plate: for use instead of the pizza plate. Use so that the pizza plate does not get dirty during normal cooking operations. Optional accessories Original accessories can be ordered through our
Summary of the content on the page No. 18
Instructions for the User 12. COOKING TABLES The oven must be preheated before all cooking operations. Do not place the foods inside the oven until it has reached the set temperature. The oven pilot light flashes to indicate this. Cooking times, for meat in particular, vary depending on the food's thickness and quality and personal preference. All times are calculated with the oven preheated. CONVENTIONAL COOKING RUNNER POSITION FROM TEMPERATURE TIME IN MINUTES THE BOTTOM °C. P
Summary of the content on the page No. 19
Instructions for the User HOT AIR COOKING RUNNER POSITION FROM TEMPERATURE TIME IN MINUTES THE BOTTOM °C. PASTA LASAGNE 2 210 - 230 45 - 50 PASTA BAKES 2 210 - 230 25 - 30 MEAT ROAST VEAL 2 180 - 190 70 - 80 LOIN OF PORK 2 180 - 190 70 - 80 SHOULDER OF PORK 2 180 - 190 90 - 100 RABBIT 2 180 - 190 70 - 80 TURKEY BREAST 2 180 - 190 110 - 120 ROAST CHICKEN 2 180 - 190 60 - 70 FISH SALMON TROUT 2 150 - 160 35 - 40 PIZZA 1 - 2 250 - 280 5 - 10 BREAD 1 190 - 200 25 - 30 MUFFINS 1 - 2 180 -
Summary of the content on the page No. 20
Instructions for the User ROTISSERIE COOKING Prepare the rotisserie rod with the food, tightening the screws A of the prongs. Fit the frame B into the holes provided in the sides of the tray. Remove the handle D and position the rotisserie rod so that the pulley E is still in the guides on the frame B. Push the frame B fully in until the tip of the rotisserie rod enters the hole C on the rear wall of the oven. If necessary, pour a little water into the frame support tray to prevent s
