Summary of the content on the page No. 1
Contents
1. INSTRUCTIONS FOR SAFE AND PROPER USE________________ 4
2. INSTALLATION __________________________________________ 6
3. DESCRIPTION OF CONTROLS _____________________________ 9
4. USE OF THE OVEN______________________________________ 14
5. AVAILABLE ACCESSORIES _______________________________ 15
6. COOKING HINTS________________________________________ 16
7. CLEANING AND MAINTENANCE ___________________________ 22
8. ADDITIONAL MAINTENANCE______________________________ 24
Summary of the content on the page No. 2
Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO CURRENT REGUL
Summary of the content on the page No. 3
Introduction DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. TO AVOID BURNS AND SCALDS CHILDREN SHOULD BE KEPT AWAY THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY ON THE OVEN DOOR FRAME. THE PLATE MUST NOT BE REMOVED. THIS APPLIANCE IS DESIGNED FOR COOKING FOOD AND IT SHALL NOT BE USED AS A SPACE HEATER. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS
Summary of the content on the page No. 4
Instructions for the installer 2. INSTALLATION 2.1 Electrical connection Check that the mains voltage and power cable ratings are as per the information provided on the label attached to the oven door frame. This label must never be removed. It is obligatory for the electrical system to be earthed according to the methods required by safety rules. If a plug and socket connection is being used make sure that the plug and socket are compatible. Avoid use of adapters and shu
Summary of the content on the page No. 5
Instructions for the installer 2.2 Installing the oven The oven is designed for installation into any piece of furniture as long as it is heat-resistant. Proceed according to the dimensions shown in Figures 1, 2 and 3. For installing under a work top, follow the dimensions given in Figure 3. For installing under a work top beneath a hob with controls connected to the oven, ensure a minimum clearance from any side walls of at least 110 mm as shown in Figure 1. For installing in a c
Summary of the content on the page No. 6
Instructions for the installer Never use the oven door to lever the oven into place when fitting. Avoid exerting too much pressure on the oven door when open. 8
Summary of the content on the page No. 7
Instructions for the user 3. DESCRIPTION OF CONTROLS 3.1 Front control panel All the oven controls are grouped together on the front panel. Before using the oven check that the electronic programmer is showing the symbol (see paragraph “3.2 Electronic programmer”. THERMOSTAT CONTROL KNOB Cooking temperature is selected by turning the knob clockwise to the desired setting, between 50° and 250°C. FUNCTION CONTROL KNOB Rotate the knob in either direction to s
Summary of the content on the page No. 8
Instructions for the user TIMER KNOB Lets you choose manual cooking or the timer with automatic turn-off of the oven when done. For manual control of cooking time, turn the knob anticlockwise to the symbol . THERMOSTAT INDICATOR LIGHT (ORANGE) When this light comes on, the oven is heating up. When this light goes out, the preset heating temperature has been reached. When the light flashes, the temperature inside the oven is steady. 10
Summary of the content on the page No. 9
Instructions for the user 3.2 Electronic programmer LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY MANUAL OPERATION KEY TIME BACK KEY TIME FORWARD KEY 3.2.1 Clock adjustment When using the oven for the first time, or after a power failure, the display flashes regularly and indicates . To stop flashing, press key on the display. By pressing keys or each single press changes the time by 1 min
Summary of the content on the page No. 10
Instructions for the user 3.2.3 Automatic cooking Use this setting to automatically start and stop the oven. By pressing key , the display lights up showing ; keep the key pressed and at the same time, press keys or to set the cooking time. By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at the same time, press keys or to regulate the end of cooking time. Release key to start the programmed count and the display will show the
Summary of the content on the page No. 11
Instructions for the user programmed count starts and the symbols and appear on the monitor. After programming the minute-counter, the display will show the right time. to display remaining time, press key . Wrong settings are prevented logically (e.g., any conflict between end of cooking time and a longer time will not be accepted by the programmer). 3.2.8 Cancellation of set data Once the programme has been set, keep the key of the function to be cancelled p
Summary of the content on the page No. 12
Instructions for the user 4. USE OF THE OVEN 4.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum temperature (250°C) long enough to burn any manufacturing oily residues which could give the food a bad taste. During cooking, do not cover the bottom of the oven with aluminium or tin foil and do not place pans or oven trays on it as this may damage the enamel coating. If you wish to use greaseproof paper, place it so that it will no
Summary of the content on the page No. 13
Instructions for the user 5. AVAILABLE ACCESSORIES The oven features 4 support positions for shelves and pans of different height. Some models do not feature all accessories. Chrome shelf: useful for holding cooking vessels. Grill mesh: for placing above grill pan to allow juices to drip into pan below . Roasting/Grill pan: to be used for roasting or grilling. Enamel tray: for baking cakes, pizza and oven desserts. Roof liner/Grill guard: removi
Summary of the content on the page No. 14
Instructions for the user 6. COOKING HINTS In fan-assisted mode preheating should be carried out at 30/40°C above the cooking temperature. This considerably shortens cooking times and reduces power consumption, as well as giving better cooking results. Keep the oven door closed during cooking 6.1 Traditional cooking (multifunction models) FUNCTION SWITCH THERMOSTAT SWITCH 50 ÷ 250°C This traditional cooking method, in which heat comes from ab
Summary of the content on the page No. 15
Instructions for the user FUNCTION SWITCH THERMOSTAT SWITCH . Permits rapid browning of foods. You are advised to place the pan in the highest position. When cooking small items for a short time the pan should be in the highest position. For larger items requiring longer cooking times, the pan should be lowered to avoid food being burned on top before being throughly cooked. Grill function must be used only with the door closed. 6.4 Fan gri
Summary of the content on the page No. 16
Instructions for the user 6.5 Delicate cooking (in some models only) FUNCTION SWITCH THERMOSTAT SWITCH 50 ÷ 250°C Ideal for pastries and cakes with a liquid surface and little sugar and moist desserts in moulds. Excellent results can also be achieved in completing cooking at the base and with dishes requiring heat in the lower area in particular. The pan is best inserted in the lowest position. 6.6 Defrosting (multifunction models)
Summary of the content on the page No. 17
Instructions for the user 6.7 Spit roasting FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION 200 Insert the food to be cooked on to the rod and tighten screws A of the forks. Fit frames B into the holes of the bowl F. Remove handle D and position the spit rod so that pulley E fits into the slot on the right-hand side of frame B. Completely introduce the bowl into the oven until the tip of the rod of frame B on the left-hand side fits into drive seat
Summary of the content on the page No. 18
Instructions for the user 6.8 Recommended cooking table Cooking times, especially meat, vary according to the thickness and quality of the food and to consumer taste. TRADITIONAL COOKING SHELF POSITION TEMPERATURE TIME ( 1 IS LOWEST) (°C) IN MINUTES (*) FIRST COURSES LASAGNE 2 - 3 210 - 230 30 OVEN-BAKED PASTA 2 - 3 210 - 230 40 MEAT ROAST VEAL 2 170 - 200 30 - 40 / KG. ROAST BEEF 2 210 - 240 30 - 40 / KG. ROAST PORK 2 170 - 200 30 - 40 / KG. CHICKEN
Summary of the content on the page No. 19
Instructions for the user FAN COOKING SHELF POSITION TEMPERATURE TIME ( 1 IS LOWEST) (°C) IN MINUTES FIRST COURSES LASAGNE 2 190 - 210 20 - 25 OVEN-BAKED PASTA 2 190 - 210 25 - 30 CREOLE RICE 2 190 - 220 20 - 25 MEAT ROAST VEAL 2 150 - 170 65 - 90 ROAST PORK 2 150 - 160 70 - 100 2 160 - 170 65 - 90 ROASTED BEEF 2 160 - 180 35 - 45 FILLET OF BEEF 2 130 - 150 100 - 130 ROAST LAMB 170 - 180 40 - 45 ROAST BEEF 2 ROAST CHICKEN 2 170 70 - 90 ROAST DUC
Summary of the content on the page No. 20
Instructions for the user 7. CLEANING AND MAINTENANCE NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. Before carrying out any maintenance, switch off the power supply to the machine. 7.1 Cleaning stainless steel To keep stainless steel in good condition it should be cleaned regularly after use. Let it cool first. 7.1.1 Ordinary Daily Cleaning To clean and preserve the stainless steel surfaces, always use only specific products that do not contain abrasives or chlori
