Summary of the content on the page No. 1
Contents
1. INSTRUCTIONS FOR PROPER USE ..................................................................................... 4
2. DISPOSAL INSTRUCTIONS – OUR ENVIRONMENT POLICY ............................................. 4
3. SAFETY PRECAUTION .......................................................................................................... 5
4. INTENDED USE OF THE APPLIANCE ................................................................................... 6
5. BEFORE FIRST USE .....
Summary of the content on the page No. 2
Instructions for proper use 1. INSTRUCTIONS FOR PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE COOKER. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND
Summary of the content on the page No. 3
Safety instruction 3. SAFETY PRECAUTION ELECTRICAL CONNECTION: PLEASE REFER TO INSTALLATION INSTRUCTION FOR THE GAS & ELECTRICAL SAFETY REGULATIONS AND THE VENTILATION REQUIREMENTS. IN YOUR OWN INTEREST, AND THAT OF SAFETY, IT IS THE LAW THAT ALL GAS APPLIANCES BE INSTALLED AND SERVICE BY COMPETENT PERSONS, WHO WILL COMPLY WITH THE RELEVANT STANDARDS AND REGULATIONS. CORGI REGISTERED INSTALLERS UNDERTAKE TO WORK TO SATISFCTIORY STANDARDS. DISCONNECTION OF GAS AND ELECTRIC APPLIANCES SHOULD ALWAY
Summary of the content on the page No. 4
Instructions for the user 4. INTENDED USE OF THE APPLIANCE THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS: COOKING AND HEATING-UP OF FOOD. ALL OTHER USES ARE CONSIDERED IMPROPER. The manufacturer declines all responsibility for damage to persons or things caused by non- observance of the above prescriptions or by interference with any part of the appliance or by the use of non-original spares. 5. BEFORE FIRST USE Do not leave the packing in the home environment. separate the
Summary of the content on the page No. 5
Instructions for the user 6. USE OF THE HOB 6.1 Cooking zone The appliance features 4/5 cooking zones of different diameter and power. Their position is clearly indicated by circles and the heat given off is defined by the markings on the glass surface. The 5 cooking zones are of the HIGH-LIGHT type and come on after a few seconds of being activated. Heating intensity can be adjusted by means of the knobs located on the front panel from a minimum to a maximum. The cooking zones marked by two con
Summary of the content on the page No. 6
Instructions for the user 7. FRONT CONTROL PANEL All the cooker controls and commands are on the front panel. OVEN THERMOSTAT KNOB FRONT LEFT-HAND COOKING ZONE OVEN FUNCTION KNOB REAR LEFT-HAND COOKING ZONE CENTRAL COOKING ZONE REAR RIGHT-HAND COOKING ZONE FRONT RIGHT-HAND COOKING ZONE Before using the oven make sure that the symbol ; appears on the display. See paragraph “9. ELECTRONIC PROGRAMMER”. COOKING HOB CONTROL KNOB Standard heating The circle next to each knob indicates the cooking zone
Summary of the content on the page No. 7
Instructions for the user OVEN THERMOSTAT KNOB Selection of cooking temperature is carried out by turning the knob clockwise to the required temperature, between 50° and 260°C. If the appliance has an electric oven, the warning light will come on when the oven is heating up. When it goes out it means that the required temperature has been reached. Regular flashing means that oven temperature is being constantly maintained at the programmed level. OVEN CONTROL KNOB Each of the functions listed be
Summary of the content on the page No. 8
Instructions for the user 8. USE OF THE OVEN For the models with electronic programmer, before using the oven make sure that the display shows the symbol . During and after use the accessible parts of the oven may be very hot, and children must always be kept at a distance. 8.1 Warnings and general advice Using the oven and the grill for the first time, heat them to the maximum temperature (260°C) for as long as it takes to burn off any production oil residues which could give a nasty flavour t
Summary of the content on the page No. 9
Instructions for the user 9. ELECTRONIC PROGRAMMER LIST OF FUNCTIONS END OF COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 9.1 Clock adjustment When using the oven for the first time, or after a power failure, the display flashes regularly and indicates . Press the key and use the keys or to set the current time. 9.2 Setting the timer To set the timer, press the key and keep it pressed until the required number of minutes is shown. When the key is released, after 5 seconds the countdown w
Summary of the content on the page No. 10
Instructions for the user 10.CLEANING AND MAINTENANCE Never use a steam jet to clean the appliance. 10.1 Cleaning stainless steel To maintain stainless steel in good condition clean it regularly after each use, once it has cooled down. 10.2 Ordinary daily cleaning To clean and preserve the stainless steel surfaces, always use only specific products that do not contain abrasives or chlorine-based acids. How to use: pour the product on a damp cloth and wipe the surface, rinse thoroughly and dry wi
Summary of the content on the page No. 11
Instructions for the user 10.5 Cleaning of oven For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts. � Clean the oven grill with hot water and non-abrasive detergent. Rinse and dry. � Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven. 10.6 Door glass The door glass should always be kept clean. Use absorbent kitchen paper to clean. In case of tough sp
Summary of the content on the page No. 12
Instructions for the user 11.EXTRAORDINARY MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations. Before any intervention, disconnect the power supply of the device. 11.1 Replacement of light bulb Remove cover A by twisting anticlockwise, replace bulb B with another similar bulb (25 W). Refit the cover A. Only use oven bulbs (T 300°
Summary of the content on the page No. 13
Instructions for the installer 12.INSTALLATION OF THE APPLIANCE It is the law that all gas appliances are installed by competent persons. Corgi gas installers are approved to work to safe and satisfactory standards. All gas installation, servicing and repair work must be in accordance with the gas safety regulations 1984 (installation and use) as amended 1990. This appliance may be installed next to a wall which is higher than the appliance, as shown in the diagram showing the correct installati
Summary of the content on the page No. 14
Instructions for the installer Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 220-240V power supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. Make sure that the appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters or shunters. The manufacturer declines all responsibil
Summary of the content on the page No. 15
Summary of the content on the page No. 16
914773157/ C
