Summary of the content on the page No. 1
Henkel, Inc.
P.O. Box 1322
Hammond, LA
70404
(985) 345-2171
www.keenovens.com
Summary of the content on the page No. 2
Henkel, Inc. P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171 www.keenovens.com Model K-15R Installation Instructions & Repair Parts List One Year Limited Warranty Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either repair or replace without charge any properly installed product which fails under normal operating conditions within one year from date of installation, provided it is returned to our f
Summary of the content on the page No. 3
Keen Ovens Model K-15R Specifications Electrode Capacity 15lbs. 18" rods Volts 120V AC/DC Watts 100W Temperature 100ºF - 300ºF Insulation 1" Interior Dimensions 3.3" D X 19" H Receptical Output 120V - 12AMP Net Weight 13lbs. Shipping Weight 15lbs. Shipping Dimensions 10.5" X 9" X 22.75" Safety Precautions Read all instructions completely before attempting to operate this unit. *** SAVE THESE SAFETY INSTRUCTIONS *** To reduce the risk of electrical shock, fire, or personal injury fol
Summary of the content on the page No. 4
• Use special care when moving heavily loaded units. • Do not store combustible material on or around the unit. • Do not operate this unit empty. • When using the unit at a distance where an extension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating. Use only a UL listed extension cord suitable for outdoor use. Make certain wire size is large enough for A/C amperage rating of unit. Operation
Summary of the content on the page No. 5
Troubleshooting The Keen oven model K-15R requires a minimal amount of electrical knowledge to repair if necessary. IF OVEN FAILS TO OPERATE – NO HEAT 1. Check power source. 2. Check power cord continuity. Replace cord assembly if faulty. 3. Check heating element continuity. If no continuity is present, replace element. IF OVEN OVERHEATS 1. If oven overheats, adjust thermostat. (See “Temperature Setting” section.) 2. If thermostat calibration fails to lower temperature, repla
Summary of the content on the page No. 6
3. Replace insulation and bottom of oven. K-15R Model K-15R Repair Parts List ITEM # QUANTITY DESCRIPTION PART NUMBER 1 1 * Elements 120V 301021 W/T 120V 301019 W/T 240V 301020 2 1 Power Cord 301100 3 1 Chest Handle 430103 4 1 Bottom Cover 100103 5 1 Thermostat 301024 6 1 Rod Lifter Assembly 100107 7 1 Strain Relief 301043 8 Neon Pilot Light 301085 Note: * 301021 - 240V 400W used in the K-15 Oven produces 100W output. ** Please state model number and serial number and spec
Summary of the content on the page No. 7
Phone (985) 345-2171 HENKEL, INC. Fax (985) 345-5653 PO Box 1322 Manufacturer of KEEN Ovens Hammond, Louisiana Quality Since 1923. 70401 Flux and Electrode Stabilizing Ovens Dry Rod After Exposure to Moisture a Air Conditioned Type (AWS) Oven Holding Sufficient Time to affect Weld Storage After Opening Quality IMPORTANT: Before Opening This table is offered as a Recondition Rebake guide to proper storage Step 1 Step 2 and oven holding Standar
