Summary of the content on the page No. 1
Multifunction oven
Installation instructions
OB60S9DE models
and User guide
NZ AU GB IE SG
Summary of the content on the page No. 2
Summary of the content on the page No. 3
1 Contents Safety and warnings 2 Installation instructions 5 Introduction 10 The control panel 11 Setting the clock and first use 12 Using your oven 13 Oven functions 14 Using the timer 16 Automatic cooking 17 Baking chart 19 User preference settings 20 Sabbath setting 22 Care and cleaning 24 Troubleshooting 35 Alert codes 37 Warranty and service 38 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all ma
Summary of the content on the page No. 4
2 Safety and warnings Installation WARNING! Electrical Shock Hazard Always disconnect the appliance from the mains power supply before carrying out any maintenance or repairs. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. Failure to follow this advice may result in death or electrical shock. WARNING! Fire Hazard Do not use adapters, reducers, or branching devices to connect this ap
Summary of the content on the page No. 5
3 Safety and warnings Operation Your oven has been carefully designed to operate safely during normal cooking procedures. Please keep the following safety instructions in mind when you are using it: WARNING! Electrical Shock Hazard Disconnect the oven from the power supply before replacing the oven light bulb. Failure to follow this advice may result in death or electrical shock. WARNING! Fire Hazard Do not place aluminium foil, dishes, trays, water or ice on the oven floor during c
Summary of the content on the page No. 6
4 Safety and warnings Important safety instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the oven, follow the important safety instructions listed below: Read all the instructions before using the oven. Use the oven only for its intended purpose as described in these instructions. Proper installation: be sure your appliance is properly installed and earthed by a qualified technician. Isolating switch: make sure this oven is connected to
Summary of the content on the page No. 7
OB60S9DE 5 Installation instructions I I I C E K I J J B L D A 16-20 mm H L F G 2.5 mm Installation diagrams for illustration purposes only Fig. 1 Product and cabinetry dimensions Product and cabinetry dimensions (mm) A overall height* of product 597 B overall width of product 595 C overall depth of product (excluding handle and knobs) 567 D height of chassis 582 E width of chassis 556 F depth of chassis 545 depth of oven frame and control panel G 22 (=distance between front of chassis and fro
Summary of the content on the page No. 8
6 Installation instructions Before you install the oven, make sure that the benchtop and oven cavity are square and level, and are the required dimensions the installation will comply with all clearance requirements and applicable standards and regulations a suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating switch must be o
Summary of the content on the page No. 9
7 Installation instructions Connecting the oven to the mains power supply Important! This oven must be connected to the mains power supply only by a suitably qualified person. This oven must be earthed. Before connecting the oven to the mains power supply, check that the domestic wiring system is suitable for the power drawn by the oven (as specified on the rating plate) the voltage corresponds to the value given on the rating plate. Model code Power Voltage OB60S9DE.. 3400 W 220 - 240
Summary of the content on the page No. 10
8 Installation instructions Securing the oven to the cabinetry 1 Position the oven in the prepared cavity. Important! Do not lift the oven by the door handle. 2 Open the oven door fully. 3 Use the supplied screws to secure the oven to the cabinetry. Important! Do not over-tighten the screws. Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this removal.
Summary of the content on the page No. 11
9 Installation instructions Final checklist TO BE COMPLETED BY THE INSTALLER Make sure the oven is level and securely fitted to the cabinetry. Check the lower trim is still undamaged. Open the oven door slowly to its fully open position and check if there is adequate clearance between the bottom of the door and the lower trim. This is to ensure correct air circulation. Should the lower trim become damaged, straighten the trim and ensure the oven door opens fully without obstruction. M
Summary of the content on the page No. 12
10 Introduction Congratulations on your new purchase. Your Fisher & Paykel multifunction oven has a number of features to make cooking a great experience for you: a choice of nine oven functions intuitive electronic controls and displays illuminated halos around the dials for visual feedback preference settings – see ‘User preference settings’ and ‘Sabbath setting’. Before you start Make sure the installer has completed the ‘Final checklist’ in the Installation instructions. Read t
Summary of the content on the page No. 13
11 The control panel Function indicators Temperature indicator (see ‘Oven functions’) - + Function dial halo Temperature dial halo Function dial Temperature dial Timer indicator (see ‘Using the timer’) Clock indicator (see ‘Setting the clock and first use’) Cooking time indicator (see ‘Automatic cooking’) Display Stop time indicator (see ‘Automatic cooking’) Select Cancel Scroll Locking the control panel You can lock the control panel to prevent unintended use (eg children playing wit
Summary of the content on the page No. 14
12 Setting the clock and fi rst use Setting the clock You will need to set the clock to make full use of your oven. 1 Ensure the power supply to 3 Press the select button 2 Select the clock by the oven is on. to confirm. pressing the right The display will flash scroll button twice. to indicate the clock is The clock indicator ready to be set. will appear and the colon will flash. 4 Set the time by pressing the scroll 5 Press the select button to confirm. buttons. Holding the
Summary of the content on the page No. 15
13 Using your oven Guard rail Stop notch Stop notch (NZ AU SG Shelf positions models only) 6 5 4 3 2 1 1 Slide in the shelves you will need, making 2 Select a function. sure that: The halo will glow white. they are between the two wires of a shelf The oven will start heating at the position or on the sliding shelf supports temperature preset for the function. the stop notches point down the guard rail is at the back. Note: the grill tray should be positioned between t
Summary of the content on the page No. 16
14 Oven functions Important! Off Use all the functions with the oven door closed. Selecting this will turn the oven off. Bake This is the traditional method of baking. It is best to bake on only one shelf at a time in this function. Ideal for large cakes and dishes that bake for several hours. Fan Bake Ideal for dishes like lasagne that need to brown on top and also single trays of small cakes or biscuits that bake in less than an hour. Grill Grill is the most suitable function for ‘finish
Summary of the content on the page No. 17
15 Oven functions Using the fat filter Use the fat filter only when roasting meat and poultry on Fan Bake , Fan Grill or Fan Forced . It helps to keep your oven clean and reduces splatter and smoking. Clean the fat filter after every use. See ‘Care and cleaning’. Remove the fat filter before baking: gripping the top flap, slide up to unhook it from the rear panel. To replace the fat filter: align with the circle in the rear panel, then slide down to hook into place. Impo
Summary of the content on the page No. 18
16 Using the timer You can use the timer at any time, even if you are not using the oven. If the time is more than an hour, the display will count down in minutes (hr:min). If it is less than an hour, it will count down in seconds (min:sec). You can set the timer for up to 23 hours 59 minutes. Important! The timer does NOT turn the oven off. 2 Press the select button to 3 Set the time by pressing 1 Select the timer by pressing confirm. the scroll buttons. the right scroll button once
Summary of the content on the page No. 19
17 Automatic cooking You can set the oven to automatically turn on later, cook for a preset time (cooking time), then automatically turn off at a preset stop time. See the example and instructions below (steps 1 to 7). If you start cooking manually and only want the oven to turn off automatically after a set cooking time: simply set the cooking time following steps 1 to 3 below. The oven will automatically turn off when the cooking time is over. Important! Safe food handling:
Summary of the content on the page No. 20
18 Automatic cooking Select function and temperature 6 Select a function. 7 Adjust the temperature. When automatic cooking is set The oven and the lights will stay off, the halos will be unlit, but your oven is now set for automatic cooking. It will automatically turn on at the required time. In a few seconds, the display will show the time of day with the cooking time and stop time indicators lit. Note: you can modify the function and temperature while the oven is waiting to start
