Summary of the content on the page No. 1
TOSHIBA Satellite A60
Portable Personal Computer
User’s Manual
Summary of the content on the page No. 2
Copyright © 2004 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Satellite A60 series Portable Personal Computer User’s Manual First edition March 2004 Copyright authority for music, movies, computer programs, data bases and other intellectual property covered by copyright laws bel
Summary of the content on the page No. 3
FCC information Product Name : Satellite A60 Model number : PSA60 FCC notice “Declaration of Conformity Infor- mation” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the ins
Summary of the content on the page No. 4
FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Contact Address: TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618-1697 Telephone: (949) 583-3000
Summary of the content on the page No. 5
EU Declaration of Conformity TOSHIBA declares, that the product: PSA60* conforms to the following Standards: Supplementary Information: “The product complies with the requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/05/EEC.” This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information Modem warnin
Summary of the content on the page No. 6
Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional require- ments conditional in EG 201 121. Germany ATAAB AN005,AN006,AN007,AN009,AN010 and DE03,04,05,08,09,12,14,17 Greece ATAAB AN005,AN006 and GR01,02,03,04 Portugal ATAAB AN001,005,006,007,011 and P03,04,08,10 Spain ATAAB AN005,007,012, and ES01 Switzerland ATAAB AN002 All other countries/regions ATAAB AN003,004 Sp
Summary of the content on the page No. 7
Pursuant to FCC CFR 47, Part 68: When you are ready to install or use the modem, call your local telephone company and give them the following information: ❑ The telephone number of the line to which you will connect the modem ❑ The registration number that is located on the device The FCC registration number of the modem will be found on either the device which is to be installed, or, if already installed, on the bottom of the computer outside of the main system label. ❑ The Ringer Equivalence
Summary of the content on the page No. 8
If problems arise If any of your telephone equipment is not operating properly, you should immedi- ately remove it from your telephone line, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily discon- tinue service. When practical, they will notify you in advance of this disconnection. If advance notice is not feasible, you will be notified as soon as possible. When you are notified, you will be given the opportunity to correct the proble
Summary of the content on the page No. 9
The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connec- tio
Summary of the content on the page No. 10
Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compli- ance with Austel standards when the country/region selection is set to Australia. The use of other country/region setting while the modem is attached to the Australian PSTN would result in you modem being operated in a non-compliant manner. To verify that the co
Summary of the content on the page No. 11
❑ Some parameters required for compliance with Telecom’s PTC Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: a/ There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and b/ The equipment shall go on-hook for a period of not less than 30 seconds between the end
Summary of the content on the page No. 12
❑ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone performance is impaired. ❑ It is recommended that this equipment be disconnected from the Telecom line during electrical storms. ❑ When relocating the equipment, always disconnect the Telecom line conne
Summary of the content on the page No. 13
Optical disc drive standards TOSHIBA Satellite A60 series computer is shipped with one of the following drives preinstalled : DVD-ROM, CD-RW/DVD-ROM, DVD-R/-RW , DVD+-R/+-RW or DVD Super Multi drive. The drive has one of the following labels : CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE1 KLASS 1 LASER APPARAT Before it is shipped, the Class 1 Laser is certified to meet the United States Chapter 21 Standards of the Department of Health and Human Services
Summary of the content on the page No. 14
DVD-ROM drive safety instructions ** means any letters or numbers. CAUTIONS:1. The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. 2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. 3. To prevent direct exposure to the laser beam, do
Summary of the content on the page No. 15
DVD-R/-RW drive safety instructions CAUTIONS:1. The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. 2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. 3. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Summary of the content on the page No. 16
Matsushita UJ-811BTJA-A Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED: Manufactured by Panasonic Communications Co., LTD 1-62, 4-Chome,Minoshima, Hakata-ku, Fukuoka, JAPAN Pioneer DVR-K13TBA Location of the required label COMPLIES WITHFDA RADIATION PERFORMANCE STANDARDS,21 CFR SUBCHAPTER J. MANUFACTURED: Manufactured by PIONEER CORPORATION 4-1, Meguro 1-chome,
Summary of the content on the page No. 17
CD-RW/DVD-ROM drive safety in- structions CAUTIONS:1. The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. 2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. 3. To prevent direct exposure to the laser beam, do not try to open the encl
Summary of the content on the page No. 18
Toshiba Samsung SD-R2512 Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED: TOSHIBA SAMSUNG STORAGE TECHNOLOGY CORPORATION 580, HORIKAWA-CHO, SAIWAI-KU, KAWASAKI-SHI, KANAGAWA, 212- 0013,JAPAN . TEAC DW-224E Location of the required label CERTIFICATION TISH PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J APPLI- CABLE DATE OF MANUFACTURE MANUFACTURED
Summary of the content on the page No. 19
DVD +-R/+-RW drive safety instruc- tions CAUTIONS:1. The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. 2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. 3. To prevent direct exposure to the laser beam, do not try to open the enclo
Summary of the content on the page No. 20
HLDS GWA-4040N Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS,21 CFR SUBCHAPTER J. MANUFACTURED: Hitachi-LG Data Storage, Inc. 20, YOIDO-DONG, YOUNG- DUNGPO-GU, SEOUL, KOREA HLDS GCC-4243N Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS,21 CFR SUBCHAPTER J. MANUFACTURED: Hitachi-LG Data Storage, Inc. 20, YOIDO-DONG, YOUNG- DUNGPO-GU, SEOUL, KOREA
