Summary of the content on the page No. 1
Summary of the content on the page No. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2007 TP-LINK Technologies Co., L
Summary of the content on the page No. 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
Summary of the content on the page No. 4
Package contents The following contents should be found in your box: One TD-W8920G 108M Wireless ADSL2+ Router One DC power Adapter for TD-W8920G 108M Wireless ADSL2+ Router Quick Installation Guide One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD for TD-W8920G 108M Wireless ADSL2+ Router, including: • This User Guide • Other Helpful Information Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased t
Summary of the content on the page No. 5
COMMENT Chapter 1. About This User Guide.......................................................................... 6 1.1 Purpose..................................................................................................................... 6 1.2 Conventions .............................................................................................................. 6 1.3 Overview of this User Guide .....................................................................................
Summary of the content on the page No. 6
5.5 Wireless LAN Configuration .................................................................................... 58 5.5.1 Wireless – Basic.............................................................................................................58 5.5.2 Wireless – Security.........................................................................................................59 5.5.3 Wireless -- MAC Filter ................................................................................
Summary of the content on the page No. 7
TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 1. About This User Guide 1.1 Purpose For helping user know about TD-W8920G 108M Wireless ADSL2+ Router better, use it accurately and adequately, maintain it expediently, we write this User Guide. This Guide introduces the product comprehensively, including the product’s functions, parameters and specifications. It also explains how to configure and use these functions accurately. 1.2 Conventions The Router or TD-W8920G mentio
Summary of the content on the page No. 8
TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 2. Product Overview 2.1 Overview of the Router Thank you for choosing the TD-W8920G 108M Wireless ADSL2+ Router. The Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g, 802.11b wireless network. The Router is easy to use. The TD-W8920G connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line
Summary of the content on the page No. 9
TD-W8920G 108M Wireless ADSL2+ Router User Guide market today, and data rates of up to 108Mbps. In dynamic 108M mode, the router can attach ™ IEEE 802.11b, 802.11g and 108Mbps Super G devices at the same time in an integrated environment. 2.2 Main Features 4 10/100Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX), 1 RJ11 port. Quick response semi-conductive surge protec t circuit, reliable surge-protect function. AFE to support Annex A/B/C/I/J/K/M, and L deployments. Provides
Summary of the content on the page No. 10
TD-W8920G 108M Wireless ADSL2+ Router User Guide - Complies with ITU G.992.5 (ADSL 2+ ) - Annex A/B/C and Annex L (RE-DSL) - Complies with IEEE 802.11b - Complies with IEEE 802.11g - Complies with IEEE 802.3, IEEE 802.3u - Supports RFC 2684 (EoA)(Bridged* and Router) - Supports RFC1577 : IPoA (IP over ATM) - Supports RFC2364 : PPPoA (PPP over ATM) - Supports RFC2516 : PPPoE (PPP over Ethernet) Note: “*” Needs third-party software. 2.4 Transmit Data-rate Maximum Download
Summary of the content on the page No. 11
TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 3. Hardware Installation Guide 3.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 3-1 The LED indicators on the front panel include the Power, System, ADSL, WLAN and 1-4 (LAN). The ADSL, WLAN and 1-4 (LAN) indicators monitor link status and activity (Link/Act). 3.2 LED Explanation Name Status Description Off No Power Power On Power on Off The Router has an error System On The Router is initial
Summary of the content on the page No. 12
TD-W8920G 108M Wireless ADSL2+ Router User Guide Off The Wireless function is disabled WLAN Slow flash The Wireless function is enabled Quick flash Sending or receiving data over wireless network Off There is no device linked to the corresponding port (1-4) LAN On Connected to a device through the corresponding port Flashing Sending or receiving data over corresponding port 3.3 The Back Panel The Router's ports, where the cables are connected, and RESET button are located on the ba
Summary of the content on the page No. 13
TD-W8920G 108M Wireless ADSL2+ Router User Guide before connecting the Router to your computer. An operating system supporting the TCP/IP protocol. Broadband Internet Access (ADSL). Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later. 3.5 Installation Environment Requirements The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be connected to the various dev
Summary of the content on the page No. 14
TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: If do not follow these guidelines, there may be significant performance degradation and you may not be able to connect to the Router wirelessly. 3.6.2 Wired network connection Wired network connections are provided through the Line port and LAN ports which are on the back of the Router. See the Back Panel picture above and the illustrations below for examples. 3.6.2.1. Connect ADSL Line Use the ADSL cable included with the Router
Summary of the content on the page No. 15
TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 3-3 14
Summary of the content on the page No. 16
TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 4. Quick Installation Guide After connecting the Router to your network, you should configure it. This chapter describes how to quickly configure the basic functions of your Router. These procedures only take you a few minutes. You can access the Internet via the Router immediately after successfully configuring. 4.1 Configure the Router 1. Login to Home Page To use the web-based utility, launch a suitable web browser and dire
Summary of the content on the page No. 17
TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-2 3. On the Connection Type screen, you can select a connection type (PPPoA, PPPoE, MER, IPoA or Bridging), which is provided by your ISP. We select PPPoE mode (For example), and then click “Next “to continue. Figure 4-3 4. Enter the PPP Username and PPP Password provided by your ISP. If PPPoE Service 16
Summary of the content on the page No. 18
TD-W8920G 108M Wireless ADSL2+ Router User Guide Name was provided by your ISP, enter the Service Name. Click “Next” to continue. Figure 4-4 5. Use the default setting of this screen click “Next” to continue. Figure 4-5 6. Use the default IP Address 192.168.1.1 and Subnet Mask 255.255.255.0. Use the default setting of “Enable DHCP Server”, and click “Next” to continue. 17
Summary of the content on the page No. 19
TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-6 7. Use the default setting “Enable Wireless”. Default SSID is “TP-LINK”, then click “Next”. Figure 4-7 8. You will see the WAN Setup-Summary screen below, click "Save/Reboot" to save these settings and reboot the Router. 18
Summary of the content on the page No. 20
TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-8 Note: The reboot process will take a while to complete, please wait before reopening your web browser. 4.2 Configure PC Your PC needs a network adapter. You may directly connect your adapter to the Router, or you may connect your adapter to a Hub/Switch, and then connect the Hub/Switch to the Router. Follow the instructions below to configure a computer running Windows XP to be a DHCP client. 1. From the Start menu on y
