NETGEAR DG834GSP user manual

User manual for the device NETGEAR DG834GSP

Device: NETGEAR DG834GSP
Category: Network Router
Manufacturer: NETGEAR
Size: 1.92 MB
Added : 4/15/2014
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for NETGEAR DG834GSP. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with NETGEAR DG834GSP.

For your convenience

If looking through the NETGEAR DG834GSP user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual NETGEAR DG834GSP on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual NETGEAR DG834GSP to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
NETGEAR DG834GSP User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual NETGEAR DG834GSP but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to NETGEAR DG834GSP. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Appendix B
NETGEAR VPN Configuration
DG834GSP to FVL328
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DG834GSP to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before y

Summary of the content on the page No. 2

Reference Manual for the ADSL Modem Wireless Router DG834GSP 10.5.6.0/24 172.23.9.0/24 VPNCExample NetworkInterfaceAddressing GatewayA GatewayB 14.15.16.17 22.23.24.25 LANIP LANIP WANIP WANIP 10.5.6.1 172.23.9.1 DG834G FVL328 Figure B-1 Note: Product updates are available on the NETGEAR, Inc. web site at http://kbserver.netgear.com/DG834GSP.asp. Step-By-Step Configuration 1. Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard (see “How to Set Up a Gateway-to-Gat

Summary of the content on the page No. 3

Reference Manual for the ADSL Modem Wireless Router DG834GSP Click VPN Policies under Advanced - VPN to invoke this screen 10.5.6.1 172.23.9.1 toFVL328 toFVL328 22.23.24.25 10 10 5 6 172 23 9 Figure B-2 NETGEAR VPN Configuration B-3 v1.0, June 2007

Summary of the content on the page No. 4

Reference Manual for the ADSL Modem Wireless Router DG834GSP 2. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21), being certain to use appropriate network addresses for the environment. a. In Step 1, enter toDG834 for the Connection Name b. In Step 2, enter 14.15.16.17 for the remote WAN's IP address c. In Step 3, enter the following: • IP Address = 10.5.6.1 • Subnet Mask = 255.255.255.0

Summary of the content on the page No. 5

Reference Manual for the ADSL Modem Wireless Router DG834GSP toDG834 toDG834 22.23.24.25 14.15.16.17 22.23.24.25 Click IKE Policies under VPN to invoke this screen 14.15.16.17 toDG834 172.23.9.1 10.5.6.1 Click VPN Policies under VPN to invoke this screen toDG834 toDG834 14.15.16.17 172 23 9 1 10 5 6 Figure B-3 NETGEAR VPN Configuration B-5 v1.0, June 2007

Summary of the content on the page No. 6

Reference Manual for the ADSL Modem Wireless Router DG834GSP 3. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834GSP. a. Open the command prompt (Start -> Run -> cmd) b. ping 172.23.9.1 Figure B-4 Note: The pings may fail the first time. If this happens, try the pings a second time. DG834GSP with FQDN to FVL328 This appendix is a case study on how to configure a VPN tunnel from a NETGEAR DG834GSP to a FVL328 using a Fully Qualified Domain Name (FQDN) to resolve

Summary of the content on the page No. 7

Reference Manual for the ADSL Modem Wireless Router DG834GSP Table B-2. Profile Summary VPN Consortium Scenario: Scenario 1 Type of VPN LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway) Security Scheme: IKE with Preshared Secret/Key (not Certificate-based) IP Addressing: NETGEAR-Gateway A Fully Qualified Domain Name (FQDN) NETGEAR-Gateway B FDQN 10.5.6.0/24 172.23.9.0/24 VPNCExample NetworkInterfaceAddressing GatewayA GatewayB WANIP WANIP LANIP LANIP 10.5.6.1 172.23.9.1 dg834g.dyndns.o

Summary of the content on the page No. 8

Reference Manual for the ADSL Modem Wireless Router DG834GSP The Use of a Fully Qualified Domain Name (FQDN) Many ISPs (Internet Service Providers) provide connectivity to their customers using dynamic instead of static IP addressing. This means that a user’s IP address does not remain constant over time which presents a challenge for gateways attempting to establish VPN connectivity. A Dynamic DNS (DDNS) service allows a user whose public IP address is dynamically assigned to be located by a

Summary of the content on the page No. 9

Reference Manual for the ADSL Modem Wireless Router DG834GSP 3. On the DG834GSP, configure the Dynamic DNS settings. a. Browse to the Dynamic DNS Setup Screen (see Figure B-6) in the Advanced menu. Figure B-6 b. Configure this screen with appropriate account and hostname settings and then click Apply. • Check the box Use a Dynamic DNS Service. • Host Name = dg834g.dyndns.org • User Name = • Password = c. Click Show Status. The resulting screen

Summary of the content on the page No. 10

Reference Manual for the ADSL Modem Wireless Router DG834GSP 4. On the FVL328, configure the Dynamic DNS settings. Assume a properly configured DynDNS account. a. Browse to the Dynamic DNS Setup Screen (see Figure B-8) in the Advanced menu. Figure B-8 b. Select the DynDNS.org radio button (see Figure B-8), configure with appropriate account and hostname settings (see Figure B-9), and then click Apply. • Host and Domain Name = fvl328.dyndns.org • User Name = • Password

Summary of the content on the page No. 11

Reference Manual for the ADSL Modem Wireless Router DG834GSP Figure B-9 c. Click Show Status. The resulting screen should show Update OK: good (see Figure B-10). Figure B-10 NETGEAR VPN Configuration B-11 v1.0, June 2007

Summary of the content on the page No. 12

Reference Manual for the ADSL Modem Wireless Router DG834GSP 5. Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard (see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21), being certain to use appropriate network addresses for the environment. The LAN Addresses used in this example are as follows: Device LAN IP Address LAN Subnet Mask DG834GSP 10.5.6.1 255.255.255.0 FVL328 172.23.6.1 255.255.255.0 a. In Step 1, enter toFVL328 for the Connectio

Summary of the content on the page No. 13

Reference Manual for the ADSL Modem Wireless Router DG834GSP Figure B-11 Note: The pings may fail the first time. If this happens, try the pings a second time. NETGEAR VPN Configuration B-13 v1.0, June 2007

Summary of the content on the page No. 14

Reference Manual for the ADSL Modem Wireless Router DG834GSP Configuration Summary (Telecommuter Example) The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Assure that there are no firewall restrictio

Summary of the content on the page No. 15

Reference Manual for the ADSL Modem Wireless Router DG834GSP • Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the Telecommuter’s Home Office configures the NETGEAR ProSafe VPN Client endpoint. Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer’s Main Office Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto Policy screen. 1. Log in to the VPN router at its LAN address of http://10.1.1.1 wit

Summary of the content on the page No. 16

Reference Manual for the ADSL Modem Wireless Router DG834GSP fromDG834GSP (in the example) Dynamic IP address IKE Keep Alive is optional; must match Remote LAN IP Address when enabled (remote PC must respond to pings) Subnet address 192.168.0.1 (in this example) 255.255.255.0 Single address 192.168.2.3 (in this example) (Remote NAT router must have Address Reservation set and VPN Passthrough enabled) Main Mode Fully Qualified Domain Name fromDG834G.com (in this example) Fully Qualified Domain Na

Summary of the content on the page No. 17

Reference Manual for the ADSL Modem Wireless Router DG834GSP 2. Click Apply when done to get the VPN Policies screen. Figure B-14 To view or modify the tunnel settings, select the radio button next to the tunnel entry and click Edit. NETGEAR VPN Configuration B-17 v1.0, June 2007

Summary of the content on the page No. 18

Reference Manual for the ADSL Modem Wireless Router DG834GSP Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the Telecommuter’s Home Office This procedure describes how to configure the 54 Mbps ADSL Modem Wireless Router Model DG834GSP. We will assume the PC running the client has a dynamically assigned IP address. The PC must have a VPN client program installed that supports IPSec (in this case study, the NETGEAR VPN ProSafe Client is used). Go to the NETGEAR website (

Summary of the content on the page No. 19

Reference Manual for the ADSL Modem Wireless Router DG834GSP b. From the Edit menu of the Security Policy Editor, click Add, then Connection. A New Connection listing appears in the list of policies. Rename the New Connection so that it matches the Connection Name you entered in the VPN Settings of the DG834GSP on Gateway A. Note: In this example, the Connection Name used on the client side of the VPN tunnel is to DG834GSP and it does not have to match the VPN_client Connection Name used on

Summary of the content on the page No. 20

Reference Manual for the ADSL Modem Wireless Router DG834GSP Figure B-16 c. Select Secure in the Connection Security check-box group. d. Select IP Subnet in the ID Type menu. e. In this example, type 10.1.1.1 in the Subnet field as the network address of the DG834GSP. f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834GSP. g. Select All in the Protocol menu to allow all traffic through the VPN tunnel. h. Select the Connect using Secure Gateway Tunnel check box. i. Se


Alternative user manuals
# User manual Category Download
1 NETGEAR 108 Mbps Wireless Media Router WGT634U User manual Network Router 35
2 NETGEAR 54 Mbps Wireless Print Server with 4 WGPS606 User manual Network Router 53
3 NETGEAR 108 MBPS WIRELESS WGT624 V3 User manual Network Router 244
4 NETGEAR 54 MBPS WGR614 v6 User manual Network Router 239
5 NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User manual Network Router 112
6 NETGEAR 3G Mobile Broadband Wireless Router MBR624GU User manual Network Router 140
7 NETGEAR 802.11g Wireless Ethernet Bridge WGE101 User manual Network Router 11
8 NETGEAR 85 Mbps Wall-Plugged Ethernet Adapter XE103 User manual Network Router 27
9 NETGEAR 300 ROUTER WNR2000 User manual Network Router 102
10 NETGEAR 802.11G PROSAFE WIRELESS ACCESS POINT WG302 User manual Network Router 30
11 NETGEAR 802.11b Cable/DSL Wireless Router MR814 User manual Network Router 12
12 NETGEAR 85 Mbps Wall-Plugged Ethernet Switch XE104 User manual Network Router 136
13 NETGEAR ADSL DG834 User manual Network Router 17
14 NETGEAR ADSL Modem Router DG632 User manual Network Router 7
15 NETGEAR ADSL2+ DG834GV4 User manual Network Router 17
16 Sony BKS-R3202/R3210/R3220 User manual Network Router 77
17 Sony DVS-V3232B/V3232M User manual Network Router 3
18 Sony BVS-V3232 User manual Network Router 8
19 Sony DMX-WL1 User manual Network Router 6
20 Sony BVS-A3232 User manual Network Router 6