Summary of the content on the page No. 1
VC-204
4-Port Ethernet over VDSL2 Bridge
port and the whole system can be watched via the rich diagnostic LEDs
on the front panel. There are two selectable models of the VC-204,
one is used at client side (CPE) and the other one is at central side
(CO). The CPE or CO mode can be adjusted by using a built-in DIP
switch. For point-to-point connection, a CPE mode VC-204 and a CO
mode VC-204 must be setup as one pair of converters to perform the
connection.
Provides Superior Upstream and D
Summary of the content on the page No. 2
VC-204 Applications Ethernet Distance Extension Two VC-204 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/55Mbps. Telephone service can still be used while the modems are in operation. The two solutions listed below are typical applications for the Ethernet over VDSL converter. MTU / MDU / Hospitality Solution The
Summary of the content on the page No. 3
VC-204 Specification Product Ethernet over VDSL2 Bridge Model VC-204 Hardware Specification 10/100Base-TX: 4 RJ-45, Auto-negotiation and Auto-MDI / MDI-X Ports VDSL: 1 RJ-11, female Phone Jack PHONE: 1 RJ-11, Built-in splitters for POTS connection DIP Switch 4 position DIP switch • CO / CPE mode select • Selectable fast and interleaved mode Functionality • Selectable target band plan • Selectable target SNR mode • VDSL-DMT - ITU-T G.993.1 VDSL Encoding - ITU-T G.997.1 - ITU-T G.993.2 VD
Summary of the content on the page No. 4
VC-204 Ordering Information VC-204 Ethernet over VDSL2 Bridge (4*RJ45, 1*VDSL2/RJ11, 1*Phone-17a) Related Products VC-201A Ethernet over VDSL2 Converter VC-810S 8-Port VDSL2 + 1-Port Gigabit TP/SFP Web Smart CO Switch PLANET Technology Corporation Data Sheet 11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. 01-09 C-VC204 Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
