ZyXEL Communications P-660N-T1A user manual

Summary of the content on the page No. 1

P-660N-T1A
802.11n Wireless ADSL2+
Gateway
Firmware v3.40
Edition 1, 7/2010
DEFAULT LOGIN DETAILS
IP Address: http://192.168.1.1
User Password: 1234
Copyright 2010
ZyXEL Communications Corporation
www.zyxel.com

Summary of the content on the page No. 2

Device Panels WPS/WLAN BUTTON POWER ETHERNET WPS/WLAN DSL PORT DSL INTERNET ETHERNET PORT RESET POWER ON/OFF 2

Summary of the content on the page No. 3

P-660N-T1A Overview The P-660N-T1A is an ADSL router with IEEE 802.11n wireless capability. It allows both wired and wireless clients to safely access the Internet. Hardware Connections This section shows you how to set up your P-660N-T1A. 1 2 3 4 3

Summary of the content on the page No. 4

1. DSL: Use a telephone wire to connect your P-660N-T1A’s DSL port to a telephone jack (or to a splitter, if one is already installed). 2. LAN: Use an Ethernet cable to connect a computer to the LAN port for initial configuration and/or Internet access. 3. POWER: Use the power adaptor provided with your P-660N-T1A to connect an appropriate power source to the POWER socket. Make sure the power source is on. 4. Push the ON/OFF button to the ON position. Look at the lights on the front pa

Summary of the content on the page No. 5

P-660N-T1A Internet and Wireless Setup 1. In your browser, go to http://192.168.1.1. 2. Enter the default password 1234 and click Login. 3. Select Go to Advanced Setup then click Apply. 5

Summary of the content on the page No. 6

4. The Status screen displays. Open the Network > Wireless LAN > AP screen. 5. Select Enable Wireless LAN, then set the country in which your P- 660N-T1A operates. 6

Summary of the content on the page No. 7

P-660N-T1A 6. Next, select a channel from the Channel Selection list. Channels available vary according to the country you select. 7. Click Apply to save your settings. 8. Type http://www.zyxel.com in your web browser’s address bar and press [Enter]. Your P-660N-T1A tries to detect your Internet connection. Wait for the P-660N-T1A to finish. If any other screens appear, follow the directions on the screen. If the web page opens correctly then your P-660N-T1A is ready for you to use. Skip

Summary of the content on the page No. 8

11. Click INTERNET/WIRELESS SETUP. Wait while your P-660N-T1A tries to detect your DSL connection. 12. Follow the directions in the wizard. Do not change default settings if your ISP did not provide information. Troubleshooting 1. If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003, make sure you allow pop-up windows, JavaScript and Java permissions or set the Internet security level lower than High in Internet Explorer (in Internet Exp

Summary of the content on the page No. 9

P-660N-T1A connected. If the lights are still different, turn off the device, wait a few seconds, and turn it on again. b. Follow the steps on page 8 again. Make sure you enter the correct information. For example, if your account has a user name and password, make sure you type it correctly. In addition, if you are not sure which encapsulation your ISP uses, contact your ISP. c. If you are using a new Internet account, contact your ISP to make sure it is active. d. If you still have proble

Summary of the content on the page No. 10

10