Summary of the content on the page No. 1
Prestige 2602HW-C Series
802.11g Wireless ADSL VoIP IAD
Prestige 2602HWL-C Series
802.11g Wireless ADSL VoIP IAD with Lifeline
Quick Start Guide
Version 3.40
3/2005
Summary of the content on the page No. 2
Prestige 2602HW Series Quick Start Guide Overview The Prestige 2602HW or 2602HWL ADSL VoIP IAD (Integrated Access Device) is an ADSL router with two phone ports for Voice over IP (VoIP) calls. The Prestige also has a built-in switch and IEEE 802.11g wireless capability. The Prestige 2602HWL’s lifeline feature adds regular phone services (that do not use the Internet). See the User’s Guide for more information on all features. The following figure shows your Prestige (A) connected to the Inter
Summary of the content on the page No. 3
Prestige 2602HW Series Quick Start Guide Do the following to make hardware connections for initial setup. 1DSL: Connect the Prestige to a telephone jack using the included telephone wire. In the P2602HWL, the DSL port handles both the ADSL and regular telephone service connections. Connect the included v-shaped cable (with one gray wire and one green wire) to the P2602HWL's DSL port. Connect the gray wire to the "modem" jack on a telephone or ISDN splitter (not included) and the green wire
Summary of the content on the page No. 4
Prestige 2602HW Series Quick Start Guide 2LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access. 3 PHONE: Connect one or more analog telephones to these ports using telephone wires. These are FXS (Foreign Exchange Station) ports. 4POWER: Use the included power adaptor to connect this power socket to an appropriate power source (see the User’s Guide for power adaptors by region). After you've made the connections, push in the power butt
Summary of the content on the page No. 5
Prestige 2602HW Series Quick Start Guide • Web Configurator Internet Access Wizard 2.1 Zero Configuration Launch your web browser and navigate to any web site (for example, www.zyxel.com). The Prestige automatically detects and configures your Internet connection. This may take about two minutes. If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Clic
Summary of the content on the page No. 6
Prestige 2602HW Series Quick Start Guide 2.3 Wizard Setup 1 In the Site Map screen, click Wizard Setup. Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and then click Next to continue or click Back to return to the previous screen. Screen information is not saved when you click Back. 2 From the Mode drop-down list box, select Routing (default) if you want to use routing features such as NAT. 6
Summary of the content on the page No. 7
Prestige 2602HW Series Quick Start Guide 3 The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From the Network Address Translation drop-down list box, select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. • PPPoE • ENET ENCAP Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out period (in sec
Summary of the content on the page No. 8
Prestige 2602HW Series Quick Start Guide If you have a SIP account like 1234@VoIP- provider.com,“1234” would be the SIP Number and “VoIP-provider.com” would be the SIP Service Domain. REGISTER Server Address/Port: If you have no registrar server information, copy what you entered in the SIP Server Address/Port fields. Caller ID: If you want to show identification information when you make VoIP calls, select Send Caller ID. 5 Verify your 6 Click Save Settings in the screen shown in step
Summary of the content on the page No. 9
Prestige 2602HW Series Quick Start Guide 2.4 Speed Dial Configuration Click Voice in the navigation panel and then Speed Dial to display the following screen. Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You can use speed dial entries for peer-to-peer calls or SIP numbers that use letters. Select a speed dial key combination. Enter the SIP number of the party you will call and a name to identify them. Select Use Proxy if calls to this party use your SIP a
Summary of the content on the page No. 10
Prestige 2602HW Series Quick Start Guide 2.6 Make Calls Through the Internet When the VoIP LED turns on, your SIP account is registered successfully. Dial a numerical SIP number (like “12345” for example) on your phone’s keypad. Use speed dial entries for peer-to-peer calls or SIP numbers that use letters. Dial the speed dial entry on your telephone’s keypad. Use your voice service provider’s dialing plan to call regular telephone numbers. 2.7 Wireless Configuration WPA-PSK encryption is pr
Summary of the content on the page No. 11
Prestige 2602HW Series Quick Start Guide 2.8 NAT NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to a different IP address in another. For example, you could translate one public IP address to multiple private IP addresses on your LAN (SUA Only). Click If you want to Advanced make LAN Setup and servers publicly then NAT to accessible, open the configure SUA NAT-Mode server sets. screen. From the NAT - Select SUA Mode screen Only i
Summary of the content on the page No. 12
Prestige 2602HW Series Quick Start Guide PROBLEM CORRECTIVE ACTION Cannot access the Check the cable connection from your computer to the Prestige. Prestige from my Make sure your computer’s IP address is in the same subnet as the Prestige’s IP address computer. (see Section 3.1). Make sure your computer’s Ethernet adapter is installed and functioning properly. If the Prestige’s IP address has changed, then enter the new one as the URL. Use Internet Explorer 6.0 and later or Netscape Navigator
Summary of the content on the page No. 13
Prestige 2602HW Series Quick Start Guide 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window. 8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 9 Close the Network Connections screen. Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 S
