Summary of the content on the page No. 1
®
SpeedStr SpeedStream eam
SpeedStr SpeedStream eam
2614
4-Port DSL/Cabl 4-Port DSL/Cabl 4-Port DSL/Cabl 4-Port DSL/Cable Router e Router e Router e Router
User Guide
Part No. 007-0207-001
Summary of the content on the page No. 2
TABLE OF CONTENTS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 About the SpeedStream 2614 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
5 Configuring Printer Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Install the Print Server Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Configure the Printer Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Windows 95/98/NT/ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
CHAPTER 1 INTRODUCTION Congratulations on your purchase of the SpeedStream 2614 DSL/Cable Router. Siemens is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. About the SpeedStream 2614 The SpeedStream 2614 provides Internet access to multiple users by sharing a single-user account. The most outstanding feature of the SpeedStream 2614 is the dual-port WAN interface which allows you to connect to an xDSL or cable
Summary of the content on the page No. 5
Applications The SpeedStream 2614 by Siemens provides many advanced features and functionality: • LAN Access – The SpeedStream 2614 provides connectivity to 10/100 Mbps devices, making it easy to create a network in small offices or homes. • Internet Access – This device supports Internet access through an xDSL, cable, ISDN or PSTN connection. Since many DSL providers use PPPoE to establish communications with end users, the SpeedStream 2614 includes a built-in PPPoE client, eliminating the
Summary of the content on the page No. 6
CHAPTER 2 INSTALLING THE SPEEDSTREAM 2614 Before installing the SpeedStream 2614 DSL/Cable Router, verify that you have all the items listed under “Package Contents,” and that you have all the necessary cabling. If any of the items are missing or damaged, contact Technical Support (see Appendix A, “Troubleshooting”). After installing the SpeedStream 2614, refer to the subsequent chapters for additional instructions: • Chapter 3, “Configuring the SpeedStream 2614” to configure the router setti
Summary of the content on the page No. 7
These ports can auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X, allowing these ports to be connected to any network device with straight- through cable. The ports can be connected directly to a computer or to a server equipped with an Ethernet network interface card, or to a networking device such as an Ethernet hub or switch. • (1) RJ-45 WAN port for connection to an xDSL or cable modem. This port is fixed at 10 Mbps full- du
Summary of the content on the page No. 8
System Requirements You must have access to a network that meets the following minimum requirements: • Internet access from your local telephone company or Internet Service Provider (ISP) using an xDSL modem, cable modem, ISDN TA, or PSTN analog modem. You may also have access over the telephone system to an analog modem at another site. • A computer using a fixed IP address or dynamic IP address assignment via DHCP, as well as a Gateway server address and DNS server address from your service
Summary of the content on the page No. 9
Figure 2-2. Connecting the SpeedStream 2614 Caution Do not plug a phone jack connector into any RJ-45 port. This may damage the SpeedStream 2614. Instead, use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. The four LAN ports on the SpeedStream 2614 can auto-negotiate the connection speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, and can negotiate the transmission mode to half-duplex or full- duplex. The LAN ports also support auto-configuration for pin sign
Summary of the content on the page No. 10
If Internet services are provided through an xDSL or cable modem, use unshielded or shielded twisted- pair Ethernet cable with RJ-45 plugs to connect the broadband modem directly to the WAN port on the SpeedStream 2614. Use either straight-through or crossover cable depending on the port type provided by the modem (see Appendix B, “Cables”). For ISDN or PSTN service, attach the access device to the RS232 serial port on the SpeedStream 2614 4. Connect a printer. By connecting a printer to the
Summary of the content on the page No. 11
7. Configure the SpeedStream 2614. Configure the SpeedStream 2614 as detailed in Chapter 3, “Configuring the SpeedStream 2614.”. 8. Configure TCP/IP. Configure the TCP/IP protocol on your network computers as detailed in Chapter 4, “Configuring Client TCP/IP.” If TCP/IP is not on your system, this chapter also includes installation instructions. 9. Install the Printer Port Monitor and configure printer services. Install the Printer Port Monitor from the SpeedStream 2614 installation CD and
Summary of the content on the page No. 12
CHAPTER 3 CONFIGURING THE SPEEDSTREAM 2614 Before you can configure the SpeedStream 2614 DSL/Cable Router, the TCP/IP protocol must be installed on all computers on your network. If you need to install TCP/IP, refer to Chapter 4, “Installing and Configuring TCP/IP.” After TCP/IP is installed and configured on your network computers, you can configure the SpeedStream 2614 from any Java-supported Web browser, including Internet Explorer or Netscape Navigator, versions 4.0 or above. The manag
Summary of the content on the page No. 13
client filtering, and various other settings. • Tools – Reset the SpeedStream 2614, restore the factory settings, or upgrade on-board firmware. • Help – View descriptions of menu items, troubleshooting tips, glossary of terms, and contact information for SpeedStream support, driver updates, Web site, and FTP site. Menu Selections The following table briefly describes the selections available from the management interface: Menu Item Description Status Displays general connection, firmware and h
Summary of the content on the page No. 14
Configuration Changes Configurable parameters are available by means of dialog boxes or drop-down lists. After you change a configuration, be sure to click the Enter button at the bottom of the page to confirm the new setting. To ensure proper screen refresh after a command entry, configure Internet Explorer 5.0 as follows (other browsers or later browser versions may vary somewhat): 1. From the browser menu bar, click Tools. 2. On the Tools menu, click Internet Options. 3. On the Internet Op
Summary of the content on the page No. 15
The Status screen provides the following information: Field Description Internet Displays WAN connection type and status. Gateway Displays system IP settings, as well as DHCP, NAT, Firewall and Printer status. Information Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, and the hardware version and serial number. Security Log Displays any illegal attempts to access your network. DHCP Client Log Displays information on all DHCP c
Summary of the content on the page No. 16
2. On the Simple Setup menu, click Set Time Zone. 3. On the Set Time Zone screen, select the correct time zone in the drop-down list box. 4. Click Enter to save the setting and continue. Configure the WAN Connection You must specify the WAN connection type required by your Internet Service Provider (ISP): • Dynamic IP Address - IP address is obtained automatically. • Static IP Address - Your ISP has assigned you a static (or fixed) IP address. • PPP over Ethernet - Some ISPs require PPPoE to con
Summary of the content on the page No. 17
Static IP Address (Fixed IP) If your selected Static IP Address as your WAN connection type, the Simple Setup | WAN | Fixed IP screen displays when you click More Configuration. 1. In the IP address assigned by your ISP boxes, enter your IP address. 2. In the Subnet Mask boxes, enter the subnet mask for the SpeedStream 2614: 255, 255, 255, 0 3. In the ISP Gateway Address boxes, enter the gateway address of your ISP. Note: You may need a fixed address if you want to provide Internet services
Summary of the content on the page No. 18
fill in the relevant fields under Secondary Dial-up. Figure 3-3. Simple Setup | WAN | Dial-up Modem 1. In the Check if you only use a dial-up modem to connect to the Internet checkbox, click to select it if the serial port is used for primary Internet access. If not selected, this connection will only be used for backup access if the primary WAN link fails. 2. In the Dial-Up Service Phone Number boxes, enter the access phone numbers provided by your ISP. 3. In the Dial-Up Account Information
Summary of the content on the page No. 19
address for you to use, select Yes and enter the designated IP address and subnet mask. Advanced Setup Procedures After completing the Simple Setup menu options, you will next move to the Advanced Setup options. You may also go directly to any of these screens by clicking that option on the main menu. The SpeedStream 2614 DSL/Cable Router supports advanced functions including hacker attack protection, virtual servers, special applications configuration, virtual server, client filtering, and r
Summary of the content on the page No. 20
Enable Firewall Protection From the Advanced Setup | Firewall screen, you can enable the SpeedStream 2614 firewall to block common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. The firewall does not significantly affect system performance, so we advise leaving it enabled to protect your network users. Enable Virtual Server From the Advanced Setup screen, you can enable
