Summary of the content on the page No. 1
LevelOne
WBR-3404TX
54Mbps Wireless Broadband Router
w/VPN/Printer Server(USB)
User`s Manual
1
Summary of the content on the page No. 2
Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All product, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpo
Summary of the content on the page No. 3
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of
Summary of the content on the page No. 4
Table of Contents Chapter 1 Introduction............................................................................6 Functions and Features ......................................................................6 Packing List ......................................................................................8 Chapter 2 Hardware Installation .............................................................8 2.1 Panel Layout .................................................................
Summary of the content on the page No. 5
4.8.1 System Log.............................................................................65 4.8.2 Firmware Upgrade..................................................................66 4.8.3 Backup Setting .......................................................................67 4.8.4 Reset to default.......................................................................67 4.8.5 Reboot....................................................................................67 4.8.6 Miscellaneou
Summary of the content on the page No. 6
Chapter 1 Introduction Congratulations on your purchase of LevelOne WBR-3404TX Wireless Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting th
Summary of the content on the page No. 7
Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and letting them pass or halting them based on the IP address of the source and destination. l Universal Plug and Play (UPnP) supported Universal Plug and Play (UPnP) enable devices such as PCs, routers or other devices to be plugged into a network and automatically know about each other. l Virtual Server supported Enables you to expose WWW, FTP and other services on your LAN to be acce
Summary of the content on the page No. 8
Enables you to create virtual private tunnels to remote VPN gateways. l 802.1X supported When the 802.1X function is enable, the Wireless user must Authenticate to this router first to use the Network service. l Virtual Computers supported: Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. Packing List l LevelOne WBR-3404TX Wireless Broadband Router l Installation CD-ROM
Summary of the content on the page No. 9
Sending or receiving data via WLAN Wireless activity Green Blinking wireless An active station is connected to On the corresponding LAN port. Link/Act. Link status Green 1~4 The corresponding LAN port is Blinking sending or receiving data. Data is transmitting in 100Mbps 10/100 Data Rate Green On on the corresponding LAN port. On The USB port is linked. USB port USB Green The USB port is sending or activity Blinking receiving data. 9
Summary of the content on the page No. 10
Port: To reset system settings to factory defaults, please follow the steps: RESET 1. Power off the device, 2. Press the reset button and hold, 3. Power on the device, 4. Keep the button pressed about 5 seconds, 5. Release the button, 6. Watch the STATUS LED, they will flash 8 times and then STATUS flash once per second. 10
Summary of the content on the page No. 11
2.1.2. Rear Panel Figure 2-2 Rear Panel Ports: Port Description 5VDC Power inlet: DC 5V, 1.5A (minimum) WAN the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-4 the ports where you will connect networked computers and other devices. PRINTER USB Printer Port (Optional) 2.2 Procedure for Hardware Installation 1. Decide where to place your Wireless Broadband Router You can place your WBR-3404TX on a desk or other flat surface, or you can mount it
Summary of the content on the page No. 12
2. Setup LAN connection a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one of the LAN ports of this product. b. Wireless LAN connection: locate this product at a proper position to gain the best transmit performance. Figure 2-3 Setup of LAN and WAN connections for this product. 3. Setup WAN connection Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN connection
Summary of the content on the page No. 13
Chapter 3 Network Settings and Software Installation To use LevelOne WBR-3404TX correctly, you have to properly configure the network settings of your computers and install the attached setup program into your MS Windows platform (Windows 95/98/NT/2000). 3.1 Make Correct Network Settings of Your Computer The default IP address of this product is 192.168.123.254, and the default subnet mask is 255.255.255.0. These addresses can be changed on your need, but the default values are used in
Summary of the content on the page No. 14
Step 1: Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it isn’t, please run “install.exe” on the CD-ROM. 14
Summary of the content on the page No. 15
Step 2: Click on the INSTALL button. Wait until the following Welcome dialog to appear, and click on the Next button. Step 3: Select the destination folder and click on the Next button. Then, the setup program will begin to install the programs into the destination folder. 15
Summary of the content on the page No. 16
Step 4: When the following window is displayed, click on the Finish button. Step 5: Select the item to restart the computer and then click the OK button to reboot your computer. Step 6: After rebooting your computer, the software installation procedure is finished. Now, you can configure the NAT Router (refer to Chapter 4) and setup the Print Server (refer to Chapter 5). 16
Summary of the content on the page No. 17
Chapter 4 Configuring LevelOne WBR-3404TX WBR-3404TX provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. 4.1 Start-up and Log in Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE
Summary of the content on the page No. 18
4.2 Status This option provides the function for observing this product’s working status: A. WAN Port Status. If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. B. Printer Status. The possible kinds of printer status include “Ready”, “Not ready”, “Printing…”, and “Device error”. When a job is printing, there may appear a “Kill Job” button on the Sidenote column
Summary of the content on the page No. 19
4.3 Wizard Setup Wizard will guide you through a basic configuration procedure step by step. Press ”Next >” 19
Summary of the content on the page No. 20
Setup Wizard - Select WAN Type: For detail settings, please refer to 4.4.1 primary setup. 20
