Summary of the content on the page No. 1
SmartAX MT880 ADSL Router
Quick Installation Guide
Summary of the content on the page No. 2
Copyright © 2004 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks , HUAWEI, C&C08, EAST8000, HONET, , ViewPoint, INtess, ETS, DMC, TELLIN, InfoLink, Netkey, Quidway, SYNLOCK, Radium, M900/M1800, TELESIGHT, Quidview, Musa, Airbridge, Tellwin, Inmedia, VRP, DOPRA, iTELLIN, HUAWEI OptiX, C&C08 iNET, NETENGINE, OptiX, iSite, U-SYS,
Summary of the content on the page No. 3
Table of Contents SMARTAX MT880 QUICK INSTALLATION GUIDE .......................1 Packing List ......................................................................................................................1 MT880 Overview ..............................................................................................................2 Preparation.......................................................................................................................3 Connect MT880........
Summary of the content on the page No. 4
SmartAX MT880 Quick Installation Guide Use this Quick Installation Guide to quickly establish your ADSL connection and access the Internet. Note: If there is a need to configure the device in your application, please ask for necessary information and guidance from your ISP. The following summarize the information useful to install MT880: 1. Packing List 2. MT880 Overview 3. Preparation 4. Connect MT880 5. Quick Troubleshooting 6. Safety Concerns 7. FAQs 8. Technical Specifications
Summary of the content on the page No. 5
MT880 Overview MT880 gives full consideration to the household arrangements, enabling horizontal and vertical positions as well as hanging on the wall. Please refer to the Appendix to erect MT880 on your table. Figure 1 MT880 Profile Figure 2 Rear Panel Cable and Power Connections • ADSL: ADSL port; connects to the Modem port of the splitter. • Ethernet: Ethernet port; connects to the Ethernet port on your computer or an Ethernet hub. • Reset: Press this button and hold for three se
Summary of the content on the page No. 6
In order to observe the LEDs, place the MT880 in a location where is easy to move it. Figure 3 Front Panel Display with LED Indicators The LED Indicators read as follows: LED Status Description Indicator Power Steady green light The unit is powered on. ADSL LINK Steady green light A valid ADSL connection. ADSL ACT Blinking green light There is traffic over ADSL line. Steady light A valid LAN connection. The speed of data transfer is Green light LAN LINK 10Mbps. The speed of dat
Summary of the content on the page No. 7
• PHONE: Connect to the telephone sets; • MODEM: Connect the ADSL port of MT880. Ethernet NIC Computer is connected to MT880 through the Ethernet port on MT880. Ensure your computer is configured with NIC adapter as well as Ethernet port. Besides, be sure to enable the TCP/IP protocol for your operating system. User Name and Password For PPP connections you have to keep user name and password to connect to your ISP. Connect MT880 Place MT880 in a safe and accessible location where yo
Summary of the content on the page No. 8
(1) Computer (2) RJ-11 Tel Cable (3) Phone (4) Ethernet Cable (5) Splitter (6) Phone Jack (7) MT880 (8) RJ-11 Tel Cable Figure 4 Computer to MT880 Connection Note: Use cross-over cable to connect MT880 and the uplink port of a switch or hub. Note: The attached Ethernet cable in the packing box is a straight-through cable. Be sure that the cable connecting the LAN to MT880 cannot exceed 100 meters. 5
Summary of the content on the page No. 9
Quick Troubleshooting Failures Instructions 1. Ensure the power adapter is well connected; Power light is out. 2. Ensure the right power adapter is used; 1. Ensure the ADSL line is well connected; 2. Ensure the telephone line before entering the house is valid, try to test with a telephone; 3. Check that there is no junction box before ADSL LINK light is connecting MT880, which has such components like out. capacitors or diodes that could hinder back high frequency signals; 4. Ens
Summary of the content on the page No. 10
Safety Concerns (1) Place the MT880 on a stable stand or table. (2) Use the power adapter provided along with MT880. (3) Do not connect telephone directly to the ADSL line. Use the splitter to connect the phone. (4) Do not put heavy objects on top of the MT880. (5) Do not spill liquid of any kind onto the MT880. And keep the unit clean and in a dry environment. (6) Break off the power supply in a stormy weather. (7) Do not expose the MT880 to direct sunlight. (8) Do not put the MT88
Summary of the content on the page No. 11
(6) Contact your ISP as a last resort; 2. How to connect multiple telephones? Make sure you have splitter installed before telephones. Otherwise, there might be noise on the line. Please find help from the figure below. (1) Phone (2) Phone Socket (3) Phone (4) RJ-11 Tel Cable (5) Splitter (6) RJ-11 Tel Cable (7) Phone Socket (8) RJ-11 Tel Cable (9) Splitter (10) RJ-11 Tel Cable (11) Phone Jack (12) MT880 3. What are the advantages compared with ordinary dial-up equipment and N-ISDN?
Summary of the content on the page No. 12
losing of voice quality or data rate. 5. Why can’t I access the Internet by using virtual dialing through Microsoft’s Internet Gateway? Internet Gateway supports PPPoE itself. It is not proper to install other PPPoE terminal software, such as Enternet300. 6. How to configure in the Windows XP Pro operating system to access the Internet? Windows XP Pro operating system has built-in PPPoE dial-up application. Click at “Network” to initiate a connection, select connection type “xDSL”,
Summary of the content on the page No. 13
Technical Specifications General Specifications ITU-T G.992.5 ITU G.994.1 (G.hs) STANDARDS: ITU-T G.992.5 Annex L G.992.5 (ADSL2+): downstream rate of 24 Mbps, and upstream rate of 1.2 Mbps Data Transfer Rate: G.992.5 Annex L: Max. transmission distance of 6.5 kilometers One RJ-11 ports for ADSL line connection External Interface: One RJ-45 port for 10/100 Base-T Ethernet connection Physical and Environmental Specifications Power Adapter: 9 V AC 1A Power <9W Consumption: Op
Summary of the content on the page No. 14
Appendix MT880 enables horizontal and vertical positions as well as hanging on the wall. When in vertical position, the MT880 body should be assembled with the stand with the following steps. Before the installation, you have to notice that there is an L-shaped chip on the stand, which can be inserted into the wider slot on the back of MT880 body. Step 1 Erect the body with the arrow symbols, next to the positioning slots, pointing down. Step 2 Have the L-shaped chips aligned with t
Summary of the content on the page No. 15
Step 3 Push the body towards the stand. 12
Summary of the content on the page No. 16
Huawei Technologies Co., Ltd. Administration Building, Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, P. R. China Postal Code: 518129 Website: http://www.huawei.com Support: http://support.huawei.com