Summary of the content on the page No. 1
Cisco 12404 Internet Router
Unpacking Instructions
Product Number: GSR4-PKG=
This document gives you instructions for unpacking and repackaging the
Cisco 12404 Internet Router. It includes:
• Tools and Equipment, page 2
� Unpacking the Cisco 12404 Internet Router, page 3
� Repackaging the Cisco 12404 Internet Router, page 9
� Transporting a Cisco 12000 Series Router, page 11
� Obtaining Documentation, page 11
� Documentation Feedback, page 13
� Obtaining Technical Assistance, page 13
� Obtai
Summary of the content on the page No. 2
Tools and Equipment Tools and Equipment You will need some of the following items and tools. � 3/16–inch flat-blade screwdriver � 1/4–inch flat-blade screwdriver � 9/16–inch (14-mm) wrench � 10–mm wrench (open-end or socket) � ESD–preventive strap � Tape—High performance, pressure sensitive, plastic, carton sealing tape � Plastic banding � Antistatic mat � Wire cutters � Pliers Cisco 12404 Internet Router Unpacking Instructions 78-13618-02 2
Summary of the content on the page No. 3
MINOR CRITICM AA LJOR TX RX C LAS LAE SRPR S 1 L OA DUK SET DE R PR RO KD LA U SSE CT 1 ACTIVE WITH ALCOH CLEAN CO O LNNECTOR PRODUIT LASER DE CLASSE 1 02 1 3 CARRIERRX PKT W CIO PN EN SE BC ET FIN OR GE PRODUCTO LASER DE CLASSE 1 40C48/POS-SR-SC GIGABIT ROUTE PROCESSOR MBUS FAIALARM L FABRIC ENABLE CONSOLIDATED SWITCH FABRIC Unpacking the Cisco 12404 Internet Router Unpacking the Cisco 12404 Internet Router This section explains how to unpack the router from the shipping pallet. Figure 1
Summary of the content on the page No. 4
Unpacking the Cisco 12404 Internet Router After you have unpacked the router, check the contents of the shipping container and verify that the following are included with your shipment. � One Cisco 12404 Internet router, fully assembled � Two AC power entry modules (PEMs) installed if ordered as an AC powered unit � Two DC power distribution units (PDUs) and two DC PEMs installed if ordered as a DC powered unit � One Accessories kit container If you do not receive the items you ordered, c
Summary of the content on the page No. 5
INPUT 100-240V 12A 50/80HZ INPUT OUTPUT OUTPUT OK OK FAIL INPUT 100-240V 12A 50/80HZ INPUT OUTPUT OUTPUT OK OK FAIL Unpacking the Cisco 12404 Internet Router Step 7 Remove the bolts that secure the bracket to the back of the router (Figure 2). Note Save the bolts and brackets. You will use them if you need to repackage the router. Figure 2 Cisco 12404 Internet Router Secured to Pallet (Rear View) Cisco 12404 Internet Router Unpacking Instructions 78-13618-02 5 66401
Summary of the content on the page No. 6
MINOR MAJOR CRITICAL TX RX CLASS 1 LASER PRODUCT ACT IVE C COL NN E EC A TO N R LP AR SO ER DP UR IT O L DA US KE TR D D ER E K CL LA AS SS SE E 1 1 0 1 23 CARR IERR W W IITP H E A S LC BE O FH OO RL E X PKT CONNECT I NG PRODUCTO LASER DE CLASSE 1 40C48/POS-SR-SC GIGABIT ROUTE PROCESSOR MBUS ALARM FABRIC FAIL ENABLE CONSOLIDATED SWITCH FABRIC Unpacking the Cisco 12404 Internet Router Step 8 Remove the bolts that secure the brackets to the side of the router (Figure 3). Note Save the bolt
Summary of the content on the page No. 7
REMOVE TIE WRAP Unpacking the Cisco 12404 Internet Router Step 9 Cut the plastic tie-wrap and remove it from the upper left hinge bracket (Figure 4). Note The plastic tie-wrap secures the front door to the chassis during shipment. Figure 4 Removing the Tie-Wrap and Label Cisco 12404 Internet Router Unpacking Instructions 78-13618-02 7 149690
Summary of the content on the page No. 8
REMOVE Unpacking the Cisco 12404 Internet Router Step 10 Open the front door and remove the labels (labeled REMOVE) that protect the rubber bumpers during shipment (Figure 5). – Close the front door. Figure 5 Removing the Rubber Bumper Shipping Label Step 11 Your Cisco 12404 Internet router is ready for installation. For installation instructions, see the Cisco 12404 Internet Router Installation and Configuration Guide online documentation, Chapter 3, “Installing the Cisco 12404 Internet
Summary of the content on the page No. 9
Repackaging the Cisco 12404 Internet Router Repackaging the Cisco 12404 Internet Router To repackage your Cisco 12404 Internet router for shipment, use these repacking instructions. If packing material is lost or damaged, the Cisco 12404 Internet router packing materials are available as an orderable item. Use Product Number: GSR4-PKG=. Tools and Equipment You need the following items and tools. � 3/16–inch flat-blade screwdriver � 1/4–inch flat-blade screwdriver � 9/16–inch (14-mm) wrenc
Summary of the content on the page No. 10
Repackaging the Cisco 12404 Internet Router Repacking the Router Repacking the Cisco 12404 Internet router into the shipping container is presented in the following procedure. This procedure assumes you have repackaged the accessory kit and have the bolts, screws, carton and brackets removed when the chassis was unpacked. Step 1 Place the router on a Cisco 12404 Internet router shipping pallet. Step 2 Secure the side and rear brackets to the pallet with the bolts you saved when the chas
Summary of the content on the page No. 11
Transporting a Cisco 12000 Series Router Transporting a Cisco 12000 Series Router The shipping package for Cisco 12000 series routers is engineered to reduce the potential of product damage associated with routine material handling experienced during shipment. To minimize potential damage to the product, transport these products in their Cisco specified packaging. Failure to do so may result in damage to the router or degradation of its performance. Also, do not remove the router from i
Summary of the content on the page No. 12
Obtaining Documentation Product Documentation DVD Cisco documentation and additional literature are available in the Product Documentation DVD package, which may have shipped with your product. The Product Documentation DVD is updated regularly and may be more current than printed documentation. The Product Documentation DVD is a comprehensive library of technical product documentation on portable media. The DVD enables you to access multiple versions of hardware and software installati
Summary of the content on the page No. 13
Documentation Feedback � Instructions for ordering documentation using the Ordering tool are at this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm � Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387). Documentation Feedback You can rate and provide feedback about Cisco technical documen
Summary of the content on the page No. 14
Obtaining Technical Assistance Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL: http://www.cisco.com/techsupport Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service cont
Summary of the content on the page No. 15
Obtaining Technical Assistance For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly. To open a service request by telephone, use one of the following numbers: Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 22
Summary of the content on the page No. 16
Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. � Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL: http://www.cisco.com/go/marketplace/ � Cisco Press publishes a wide range of general networking, train
Summary of the content on the page No. 17
Obtaining Additional Publications and Information � Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL: http://www.cisco.com/ipj � Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL: http://www.cisco.com/en/US/products/index.h
Summary of the content on the page No. 18
Obtaining Additional Publications and Information This document is to be used in conjunction with the Cisco 12404 Internet Router Installation and Configuration Guide, Part Number: 7813511=. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCN
