Billion Electric Company BiPAC 7402(G)X(L) Series user manual

Summary of the content on the page No. 1

BiPAC 7402(G)X(L) Series
3G/ADSL2+ (802.11g) (VPN)
Firewall Router




Quick Start Guide

Summary of the content on the page No. 2

Quick Start Guide

Summary of the content on the page No. 3

Billion BiPAC 7402(G)X(L) Series ADSL2+ Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER’S MANUAL ON CD-ROM. Package Contents BiPAC 7402(G)X(L) Series ADSL2+ Router CD containing the on-line manual RJ-11 ADSL/telephone cable Ethernet (

Summary of the content on the page No. 4

Quick Start Guide Hardware Overview BiPAC 7402X(L) does not support 802.11g and WPS functions. The Front LEDs Lit green when the wireless Lit green when Lit when power is ON. successfully connection is made. connected to an Lit red when POST Flashes when sending/receiving data. ADSL DSLAM (Power On Self Test) (“line sync”) Flashes regularly when WPS is active failure (not bootable) or device malfunctions Lit when connected to Lit and an Ethernet

Summary of the content on the page No. 5

Billion BiPAC 7402(G)X(L) Series ADSL2+ Router Hardware Connection Hardware Installation 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to different countries. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface.

Summary of the content on the page No. 6

Quick Start Guide 3. USB Connection The USB 2.0 port supports 3G/HSDPA modem connectivity; users can even more conveniently enter access with 3G service to eliminate the limitation of the wired network and extends the last-mile service wirelessly. Incorporated the wired environment, the solution applies the auto fail-over feature to provide various applications and ensure always-on connectivity for SOHO users. - 4 -

Summary of the content on the page No. 7

Billion BiPAC 7402(G)X(L) Series ADSL2+ Router 4. ADSL Connection Connect the supplied RJ-11 phone cable to the router’s ADSL port, and the other side to the phone jack on the wall. 5. Splitter/ Micro-filter Connection Splitter / Micro-filter are important for ADSL installation. It helps high-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent i

Summary of the content on the page No. 8

Quick Start Guide Setup Utility After you complete the hardware installation, insert the CD-ROM to the CD-ROM drive to perform Setup Utility for network configuration. The Setup Utility will auto-run. Follow the step-by-step configuration wizard, the utility will guide you complete the basic network configuration. Troubleshooting 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have

Summary of the content on the page No. 9

Billion BiPAC 7402(G)X(L) Series ADSL2+ Router Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion WORLDWIDE http://www.billion.com 7402(G)X(L) Series V100EN