Summary of the content on the page No. 1
BEST DATA PRODUCTS, INC.
BEST DATA PRODUCTS, INC.
DSL542EU & DSL582E
DSL542EU & DSL582E
ADSL2/2+ Router Modem
ADSL2/2+ Router Modem
User’s Manual
User’s Manual
Revision 2.0
October 2004
Summary of the content on the page No. 2
Summary of the content on the page No. 3
DSL542EU ADSL Router User’s Manual Copyright This manual may not be copied, photocopied, transmitted, or translated into language or computer language, in any form, or by any means, in whole or in part, without the prior written consent by the manufacturer. © Copyright 2004 All rights reserved. Disclaimer The manufacturer makes no representations or warranties, expressed, statutory or implied, regarding the fitness or merchantability of this product for any particular purpose
Summary of the content on the page No. 4
DSL542EU ADSL Router User’s Manual Federal Communications Commission (FCC) NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
Summary of the content on the page No. 5
Table of Contents 1. INTRODUCTION.................................................................................................1 1.1 FEATURES ......................................................................................................1 1.2 PACKAGE CONTENTS.....................................................................................1 2. ROUTER OVERVIEW........................................................................................2 2.1 PORTS AND BUTTONS........
Summary of the content on the page No. 6
Summary of the content on the page No. 7
DSL542EU ADSL Router User’s Manual 1. Introduction The DSL542EU ADSL Router Modem is an Asymmetric Digital Subscriber Line (ADSL) Modem for home or small office network connectivity to an Internet service provider over the Asynchronous Transfer Mode (ATM) network protocol. ATM is a protocol that divides packets into small fixed sized cells for rapid transmission over high-speed networks. The ATM protocol allows various types (e.g. data, voice, and video) of traffic to be securely and ef
Summary of the content on the page No. 8
DSL542EU ADSL Router User’s Manual 2. Router Overview Your Router has many ports, switches and LEDs. Let’s take a look at the different options. Depending upon your model of Router, your Router may have some or all of the LEDs and ports listed below: 2.1 Ports and Buttons (4 Ports Router) (8 Ports Router) RESET: The RESET button will set the Router to its factory default setting and reset the Router. You may need to reset the Router to its factory defaults if the configura
Summary of the content on the page No. 9
DSL542EU ADSL Router User’s Manual 2.2 LED Description (4 Ports Router) (8 Ports Router) POWER: The LED stays lighted to indicate the system is power on properly. LINK: The LED stays lighted to indicate the WAN connection is established. DATA: The LED flashes to indicate the Router is sending/receiving data. LAN 1-4 or 1-8: The LED stays lighted when a connection is established to LAN port and flashes when LAN port is sending/receiving data. (The number of LAN ports depend
Summary of the content on the page No. 10
DSL542EU ADSL Router User’s Manual 3. Installing Your Router The Figure below illustrates the hardware connections. Refer to the steps that follow for specific instructions. Before you begin, turn the power off for all devices. These include your computer(s), your LAN hub/switch (if applicable), and the DSL542EU ADSL Router. WARNING Step 1. Connect the ADSL cable Connect one end of the provided phone cable to the port labeled ADSL on the rear panel of the device. Connect the
Summary of the content on the page No. 11
DSL542EU ADSL Router User’s Manual 4. HTTP Web Configuration The web configuration interface provides an easy-to-use user interface for Router configuration. All Router configurations can be done through this interface. Start your favorite web browser (i.e. Netscape 4.0 or Explore 4.0 higher) and then enter the IP address (default is http://192.168.1.1) in the web page address. The web configuration page will appear. 4.1 Quick Configuration The Quick Configuration page displays DSL
Summary of the content on the page No. 12
DSL542EU ADSL Router User’s Manual 4.2 Wizard Wizard Setup page is a step-by-step guide and it will guide you through quick and basic steps to help you connect to your ISP (Internet Service Provider). Press Next button and follow the introduction to complete the configuration procedure. You will be asked to enter some information to perform the connection. This information should be provided to you by your ISP. Step 1. Select a suitable SNTP Server and Time Zone of your location to
Summary of the content on the page No. 13
DSL542EU ADSL Router User’s Manual 7
Summary of the content on the page No. 14
DSL542EU ADSL Router User’s Manual Step 3. Input ATM VPI/VCI values when you select Bridge mode at previous step. If you choose PPPoE or PPPoA, you will need to fill user name and password column. If you choose Routing mode, you need to input WAN IP, Netmask, Gateway and DNS. Step 4. Summary page displays all parameter you configured ahead to let you reconfirm these settings are correct. 8
Summary of the content on the page No. 15
DSL542EU ADSL Router User’s Manual Step 5. Click Apply button, system will save your configuration to Flash ROM automatically. 9
Summary of the content on the page No. 16
DSL542EU ADSL Router User’s Manual 5. Advanced Configuration To setup your Router with advanced configurations, from the Main page, select Advanced Configuration. When the configuration utility prompts you to enter the user name and password, enter the default value admin for both. 5.1 Quick Start Quick Start page displays the configuration of current Running Mode. Select the suitable mode for your Router as instructed by your ISP at this page. The Router supports 1483-Bridged,
Summary of the content on the page No. 17
DSL542EU ADSL Router User’s Manual 5.2 Information Information menu provides you with the current status of Device, WAN, LAN and ADSL. 5.2.1 Device Information This page displays the basic device information including DSP Version, Firmware Version, CPE-end Interface and MAC address. 11
Summary of the content on the page No. 18
DSL542EU ADSL Router User’s Manual 5.2.2 WAN Information This page displays the WAN information including PVC (VPI/VCI), Protocol, WAN IP Address, NAT and Packets has been sent and received. 5.2.3 LAN Information This page displays the LAN information including Ethernet IP Address, Link Seed, Broadcast times, Collisions times and Packets has been sent and received. 12
Summary of the content on the page No. 19
DSL542EU ADSL Router User’s Manual 5.2.4 ADSL Information This page displays the ADSL information such as Connected State, Upstream Rate, Downstream Rate, Standard, Coding Gain, etc. 5.2.5 DHCP Information This page displays DHCP clients that request IP from DHCP server when DHCP server is enabled. It shows the DHCP clients information including its IP Address, Computer Name, MAC Address and Lease Time. 13
Summary of the content on the page No. 20
DSL542EU ADSL Router User’s Manual 5.2.6 Route Information This page displays the Routing Table of the Router. The routing table will show the routing status of Destination, Netmask, Gateway, and Interface. 5.3 Configuration Configuration menu provides you with a user-friendly interface to configure detail settings of WAN, LAN, ADSL, DNS Server, SNTP, DHCP Server/Relay, Routing Table, Virtual Server, IP Filter, Port Filter and IDS (Intrusion Detection System). 14
