Summary of the content on the page No. 1
Quick Installation Guide
TEW-630APB
Summary of the content on the page No. 2
Table of Contents Table of Contents English ...................................................................................................... 1 1. Before You Start ................................................................................. 1 2. Install Hardware ................................................................................. 2 3. Configure the Access Point ................................................................ 3 6 Troubleshooting ....................
Summary of the content on the page No. 3
1. Before You Start Package Contents ? TEW-630APB ? Quick Installation Guide ? User's Guide CD-ROM ? AC Power Adapter (12V DC, 1A) ? 1 x RJ-45 Ethernet Installation Requirements ? A web browser such as Internet Explorer (5.5 or higher) ? A computer with a network adapter properly installed ? A network Switch or Hub with an available network LAN port ? A RJ-45 network cable Application 300Mbps Wireless N Access Point (TEW-630APB) HD DATA 300Mbps, share multimedia throughout the house 1 Engli
Summary of the content on the page No. 4
2. Install Hardware Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-630APB to the same switch/hub. 1. Connect a RJ-45 cable from the Switch/Hub to the LAN port of the Access Point. 2. Connect the AC Power Adapter to the Access Point and then to a power outlet. 3. Verify that the following front pa
Summary of the content on the page No. 5
3. Configure the Access Point Note: It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned to your computer's network adapter in the subnet of 192.168.1.x. Since the Access Point's default IP address is 192.168.1.100, make sure no other network devices are assigned an IP address of 192.168.1.1. (Refer to the Troubleshooting section on how to configure TCP/IP settings on your PC) 1. Op
Summary of the content on the page No. 6
5. Click Next. Note: The example below is for WPA security. If you select Best (WPA2) or Better (WPA), make sure your wireless adapters support WPA2 or WPA. If your wireless adapters do not support WPA2 or WPA, then select Good (WEP). 6. Select the desired level of security and then click Next. 7. If you have enabled security, type in any password and then click Next. 4 English
Summary of the content on the page No. 7
8. Take note of the Pre-Shared Key and then click Save. 9. Click Continue. Note: If you enabled any level of security (Best, Better, Good), you need to make sure to enter the Pre-Shared key in your wireless adapter's configuration. Your installation is now complete. For detailed information regarding the TEW-630APB's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or Trendnet's website at http://www.trendnet.com. Register Your Product
Summary of the content on the page No. 8
Troubleshooting Q1: How do I configure TCP/IP settings on my computer? 1. Go into the Control Panel and double- click the Network Connections icon, right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.1.x. Q2: I typed http://192.168.1.100 in my Internet Browser's Address Bar,
Summary of the content on the page No. 9
Q4: After I successfully configured the Access Point to meet my network settings, I can not connect to my network using wireless computers. A4: If you have a DHCP server in your network, you need to go into TCP/IP settings again and re-select "Obtain an IP address automatically" to allow the PC to regain an IP address from your DHCP server. Q5: All the settings are correct, but I can not make a wireless connection to the Access Point. A5: First, double check that the WLAN light on the Access
Summary of the content on the page No. 10
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling
Summary of the content on the page No. 11
TRENDnet Technical Support . US Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support . . . . . Europe (Germany France Italy Spain Switzerland UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDn
