Summary of the content on the page No. 1
32-bit PCI-Bus 10/100Mbps
Fast Ethernet Card
Quick Installation Guide
Summary of the content on the page No. 2
The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Class B Certification This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har
Summary of the content on the page No. 3
Introduction Thank you for choosing the 32-bit PCI-Bus 10/100Mbps NWay ACPI Fast Ethernet Card, this card is auto-configurable upon power up and also supports auto-negotiation to automatically select the optimum speed and communication mode of an attached device. Additionally, the 32-bit PCI-Bus 10/100Mbps NWay ACPI Fast Ethernet Card complies with ACPI, and PC99, and includes support for Remote Wake-Up by Magic Packet™, ® LinkChg and Microsoft wake-up frame. About Fast Ethernet Fa
Summary of the content on the page No. 4
communications capability between the two devices. Remote LAN Wakeup Remote LAN Wakeup capability is a key feature of a centrally managed PC environment. This technology allows networked PCs to be powered up and managed from a central location, at any time of the day or night. To employ Remote LAN Wakeup, three elements are required: Desktop management software that can send a “wake-up” packet to a PC. A Wake-On-LAN enabled PC motherboard (with PCI 2.2) that can supply low-level a
Summary of the content on the page No. 5
Product Featues Designed for versatility and performance, the 32-bit PCI bus 10/100Mbps Fast Ethernet Adapter provides the following features: • Compliant to IEEE 802.3, 10BASE-T standard • Complaint to IEEE 802.3u 100BASE-TX standard • Compliant to IEEE ANSI/802.3 NWay Auto-negotiation standard • Compliant to PCI 2.1, 2.2 standards • Compliant to PC99 standard • Supports Wake-On-LAN function for remote wake-up (AMD Magic Packet, LinkChg and Microsoft wake-up frame) • Supports 4
Summary of the content on the page No. 6
A flashing green LED indicates that the adapter is sending or receiving data. Installation Installation the 10/100Mbps PCI bus Fast Ethernet Card requires Hardware installation first, then BIOS and Software installation. Step 1, Hardware Installation 1. Switch off the computer, unplug the power cord, and remove the computer’s cover. 2. Select an unused PCI bus-master slot (for WoL use a slot PCI 2.2) and remove its protective bracket. 3. Carefully insert the card and press until al
Summary of the content on the page No. 7
already assigned to another device. In such a case, the conflict of Interrupt Number will cause faults in the behavior of both devices. Then it is necessary to run the CMOS Setup utility, and manually assign a non-conflicting Interrupt Number. Step 3, Driver Installation Before you connect the 10/100Mbps PCI bus Card to the network, you have to install the network driver first. The driver for each networking operating system is under a separate directory. A HELP.COM file under root di
Summary of the content on the page No. 8
provides the option to activate or deactivate PCI slots. 4. Replace the adapter in question with a verified adapter and run Diag.EXE diagnostic tests on the sofrware diskette at directory of \DIAG\. 5. Install the questioned adapter in another PCI computer and run the tests again. Remove all other PCI adapters from the computer and run the tests again. If the verification/diagnostic run is not normal, then there is probably an interrupt number conflict which will have to be resolved m
Summary of the content on the page No. 9
Specifications IEEE 802.3 10BASE-T Standards: IEEE802.3u 100BASE-TX ANSI/IEEE 802.3 NWay Auto-negotiation IEEE 802.3x Full Duplex flow control PCI Local Bus Rev.2.1, 2.2 32-bit PCI 2.1, 2.2. Bus Master Host interface: Magic Packet Wake-On-Lan: LinkChg Microsoft wake-up frame Link, Activity LED indicators: RJ-45 Media Interface: FCC Class B EMI CE Certification, Class B Compatiblity: VCCI Class B Storage: -10 C ~ 70 C ° ° Temperture: Operating: 0°C ~ 40°C 10% ~90% non-co
