Summary of the content on the page No. 1
®
SUPER
SUPERSERVER 5013C-M8
USER’S MANUAL
Revision 1.0a
Summary of the content on the page No. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes t
Summary of the content on the page No. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 5013C-M8. Installation and maintainance should be performed by experienced technicians only. The SuperServer 5013C-M8 is a high-end single processor 1U rackmount server based on the SC813MS-300C 1U rackmount server chassis and the Super P4SC8 motherboard. The P4SC8 supports a single Intel® Pentium® 4 processor (wi
Summary of the content on the page No. 4
SUPERSERVER 5013C-M8 User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 5013C-M8. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the P4SC8 motherboard, including the locations and functions of connectors, headers and jumpers. Refer to this chap- ter when adding or removing processors or main memory
Summary of the content on the page No. 5
Preface Notes v
Summary of the content on the page No. 6
SUPERSERVER 5013C-M8 User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview......................................................................................................... 1-1 1-2 Motherboard Features ...................
Summary of the content on the page No. 7
Table of Contents 3-4 SCSI Drive Carrier LEDs ............................................................................... 3-3 Chapter 4: System Safety 4-1 Electrical Safety Precautions ........................................................................ 4-1 4-2 General Safety Precautions .......................................................................... 4-2 4-3 ESD Precautions .............................................................................................. 4-3 4-4 O
Summary of the content on the page No. 8
SUPERSERVER 5013C-M8 User's Manual Wake-On-Ring ........................................................................................ 5-15 SATA LED ............................................................................................... 5-15 5-10 Jumper Settings ............................................................................................ 5-16 Explanation of Jumpers ........................................................................ 5-16 CMOS Clear .................
Summary of the content on the page No. 9
Table of Contents 7-3 Main BIOS Setup ............................................................................................ 7-2 7-4 Advanced BIOS Setup ...................................................................................... 7-4 7-4.1 Advanced BIOS Features ............................................................. 7-4 7-4.2 Advanced Chipset Control ............................................................ 7-6 7-4.3 I/O Device Configuration .........................
Summary of the content on the page No. 10
SUPERSERVER 5013C-M8 User's Manual Notes x
Summary of the content on the page No. 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 5013C-M8 is a high-end single processor, 1U rackmount server with state-of-the-art features. The 5013C-M8 is comprised of two main subsystems: the SC813MS-300C 1U rackmount chassis and the P4SC8 motherboard. Please refer to our web site for information on operating systems that have been certified for use with the 5013C-M8 (www.supermicro.com). In addition to the motherboard and chassis, various hardware
Summary of the content on the page No. 12
SUPERSERVER 5013C-M8 User's Manual 1-2 Motherboard Features At the heart of the SuperServer 5013C-M8 lies the P4SC8, a single processor motherboard designed to provide maximum performance. Below are the main features of the P4SC8. Chipset Overview The P4SC8 is based on Intel’s E7210 chipset (see Figure 1-1 for a block dia- gram). The E7210 chipset is made up of two main components: The Memory Controller Hub (MCH) The I/O Controller Hub (6300ESB) Memory Controller Hub (MCH) The MCH controls the
Summary of the content on the page No. 13
Chapter 1: Introduction Processors The P4SC8 supports a single Intel® Pentium® 4 processor (with a 2MB integrated transfer cache) of up to 3.40 GHz with hyper-threading technol- ogy in a 478-pin microPGA socket (processors up to 3.20 GHz must be 90 nano or 0.13 micron technology) or a single Intel® Celeron® processor (with a 128KB integrated advanced transfer cache) of up to 2.80 GHz. Please refer to the support section of our web site for a complete listing of supported processors (http://www.s
Summary of the content on the page No. 14
SUPERSERVER 5013C-M8 User's Manual Other Features Other onboard features that promote system health include eight voltage monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue. Processor 0 Dual-Channel DIMMs (4) (DDR400/333/266) DIMM CSA Gb Ethernet 3.2 GB/s MCH Controller (66MHz) DIMM Hub A USB Ports USB 2.0 64-bit/66 MHz U320 SCSI PCI-X (4) Cntr ICH UDMA 32-bit/33 MHz 6300ESB PCI ATA/100 100 Ports (2) LPC Bus
Summary of the content on the page No. 15
Chapter 1: Introduction 1-3 Server Chassis Features The SuperServer 5013C-M8 is a 1U rackmount server platform designed with some of today's most state-of-the-art features. The following is a general outline of the main features of the SC813MS-300C chassis. System Power When configured as a SuperServer 5013C-M8, the SC813MS-300C chassis includes a single 300W power supply. SCSI Subsystem The SC813MS-300C chassis was designed to support four SCSI hard drives. The SCSI drives are hot-swappable u
Summary of the content on the page No. 16
SUPERSERVER 5013C-M8 User's Manual Figure 1-2. Rear I/O Panel Cooling System The SC813M-300C chassis has an innovative cooling design that features three 4-cm high-performance system cooling fans. Each of these fans plug into a chassis fan header on the motherboard and operate at full rpm continuously. 1-6
Summary of the content on the page No. 17
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General I
Summary of the content on the page No. 18
SUPERSERVER 5013C-M8 User's Manual Notes 1-8
Summary of the content on the page No. 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 5013C-M8 up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your 5013C-M8 system has come to you with the processor and memory preinstalled. If your system is not already fully integrated with a moth- erboard, processor, system m
Summary of the content on the page No. 20
SUPERSERVER 5013C-M8 User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient airflow and ease in servicing. Warnings and Precautions! ! ! Rack Precautions - Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. - In
