Summary of the content on the page No. 1
®
SUPER
SUPERSERVER 6113L-8
SUPERSERVER 6113L-i
USER’S MANUAL
1.0
Summary of the content on the page No. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes t
Summary of the content on the page No. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6113L-8/ 6113L-i. Installation and maintainance should be performed by experienced technicians only. The SuperServer 6113L-8/6113L-i is a high-end, dual Itanium2 processor rackmount server based on the SC813HS-500/SC813Hi-500 1U rackmount server chassis and the i2DML-8G2/i2DML-iG2 serverboard. Manual Organization
Summary of the content on the page No. 4
SUPERSERVER 6113L-8/6113L-i User's Manual Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the i2DML-8G2/i2DML-iG2 serverboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconfiguring the serverboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the 1U SC813HS-500/SC813Hi-500 rackmount server chassis. You should f
Summary of the content on the page No. 5
Preface Notes v
Summary of the content on the page No. 6
SUPERSERVER 6113L-8/6113L-i User's Manual Table of Contents Preface About This Manual ....................................................................................................... iii Manual Organization .................................................................................................... iii Chapter 1: Introduction 1-1 Overview ............................................................................................................ 1-1 1-2 Serverboard Features ......
Summary of the content on the page No. 7
Table of Contents Chapter 4: System Safety 4-1 Electrical Safety Precautions ........................................................................... 4-1 4-2 General Safety Precautions ............................................................................. 4-2 4-3 ESD Precautions ............................................................................................... 4-3 4-4 Operating Precautions ....................................................................................
Summary of the content on the page No. 8
SUPERSERVER 6113L-8/6113L-i User's Manual SMB ......................................................................................................... 5-21 SMB Power Connector ........................................................................... 5-21 5-9 Jumper Settings ............................................................................................. 5-22 Explanation of Jumpers .......................................................................... 5-22 CMOS Clear .........
Summary of the content on the page No. 9
Table of Contents Appendices: Appendix A: BIOS Error Beep Codes ...................................................................... A-1 Appendix B: BIOS POST Codes .............................................................................. B-1 Appendix C: Software Installation ............................................................................ C-1 Appendix D: System Specifications ........................................................................ D-1 ix
Summary of the content on the page No. 10
SUPERSERVER 6113L-8/6113L-i User's Manual Notes x
Summary of the content on the page No. 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 6113L-8/6113L-i is a high-end dual processor, 1U rackmount server that features some of the most advanced technology currently available. The SuperServer 6113L-8/6113L-i is comprised of two main sub- systems: the SC813HS-500/SC813Hi-500 1U rackmount chassis and the i2DML- 8G2/i2DML-iG2 dual Itanium2 processor serverboard. Please refer to our web site for information on operating systems that have been certif
Summary of the content on the page No. 12
SUPERSERVER 6113L-8/6113L-i User's Manual Note: "(B)" indicates black. 1-2 Serverboard Features At the heart of the SuperServer 6113L-8/6113L-i lies the i2DML-8G2/i2DML-iG2, a dual Intel Itanium2 processor serverboard designed to provide maximum perfor- mance. Below are the main features of the i2DML-8G2/i2DML-iG2. Chipset The i2DML-8G2/i2DML-iG2 is based on Intel's E8870 chipset, which is a high- performance chipset designed for high-end server platforms (see Figure 1-1). The Intel 8870 chipse
Summary of the content on the page No. 13
Chapter 1: Introduction Processors The i2DML-8G2/i2DML-iG2 supports single or dual Intel Itanium2 processors of up to 1.50 GHz with a 6 MB L3 cache at a 400 MHz FSB. Please refer to the support section of our web site for a complete listing of supported processors (http://www.supermicro.com/support/). Memory The i2DML-8G2/i2DML-iG2 has eight 184-pin, DIMM slots that can support up to 16 GB of low-profile, registered ECC DDR200 (PC1600) SDRAM (DDR266 is supported but at 200 MHz only). Module si
Summary of the content on the page No. 14
UDMA100 SUPERSERVER 6113L-8/6113L-i User's Manual Other Features Other onboard features are included to promote system health. These include various voltage monitors, two CPU temperature sensors, four fan speed sensors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue. Figure 1-1. E8870 Chipset Block Diagram Processor 1 Processor 2 16 GB (Max.) DDR200 LPC Bus DIMM1 MRH_D DIMM5 3x1MB DIMM2 FWH MRH_D DIMM6 IDE1 IDE2
Summary of the content on the page No. 15
Chapter 1: Introduction 1-3 Server Chassis Features The SC813HS-500/SC813Hi-500 is one of Supermicro's third-generation 1U chas- sis and features four SCSI/IDE hard drive bays, a slim CD-ROM drive and a revolutionary cooling design that can keep today's most powerful processors running well below their temperature thresholds. The following is a general outline of the main features of the SC813HS/SC813Hi-500 chassis. System Power When configured as a SuperServer 6113L-8/6113L-i, the SC813HS-500/
Summary of the content on the page No. 16
SUPERSERVER 6113L-8/6113L-i User's Manual Cooling System The SC813HS-500/SC813Hi-500 chassis' revolutionary cooling design has been optimized to provide sufficient cooling for dual Itanium2 configurations. The SC813HS-500/SC813Hi-500 includes two heavy duty 10-cm blower fans located in the middle of the chassis. These fans operate continuously at full rpm. If they break down, the ambient air temperature inside the chassis will rise and activate an overheat LED. In addition, a high-speed 4-cm
Summary of the content on the page No. 17
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General I
Summary of the content on the page No. 18
SUPERSERVER 6113L-8/6113L-i User's Manual Notes 1-8
Summary of the content on the page No. 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6113L-8/ 6113L-i up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your SuperServer 6113L-8/6113L-i system has come to you with the processors and memory preinstalled. If your system is not already fully integrated with a
Summary of the content on the page No. 20
SUPERSERVER 6113L-8/6113L-i User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient airflow and ease in servicing. Warnings and Precautions! ! ! Rack Precautions - Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on the
