Summary of the content on the page No. 1
®
Voyager PRO UC v2
Bluetooth Headset
BT300-M
Bluetooth USB Adapter
USER GUIDE
TM
Summary of the content on the page No. 2
C C Co o ont nt nte e ent nt nts s s Welcome 3 Voyager Pro UC next generation technology 3 System Requirements 3 What’s in the Box 4 Adapter and Headset Basics 5 Bluetooth USB Adapter 5 Headset 5 Stowing the headset 5 Headset Controls 6 Charge Your Headset 7 Charge Indicator Lights 7 Low Battery Warnings 7 Fit your Headset 8 Fitting the Headset 8 Quick-turn Adjustment for the left ear 9 Accessories and replacement parts 9 Pairing your Bluetooth USB Adapter 10 Initial Pairing 10 To Re-Pair your B
Summary of the content on the page No. 3
Welcome Congratulations on purchasing your new Plantronics Voyager PRO UC. This user guide contains instructions for setting up and using your Voyager PRO UC Bluetooth Headset and BT300-M Bluetooth USB Adapter. Voyager Pro UC next generation technology. Featured highlights and Smart Sensor technology: • Auto Answers calls by placing headset on your ear. • Auto transfers calls between mobile phone and headset. • When on a mobile or PC call, softphone presence is automatically updated. • Elimin
Summary of the content on the page No. 4
What’s in the Box 1 2 3 4 6 5 1 Voyager PRO UC Headset with pre-installed medium eartip 2 Bluetooth USB Adapter 3 Soft gel eartips (small & large) and optional foam tip covers (small & medium) 4 Carry case 5 AC charging cable 6 USB charging cable 4
Summary of the content on the page No. 5
Adapter and Headset Basics Bluetooth USB Adapter 1 1 LED indicator light Headset 1 2 3 4 5 1 Volume/Mute button 2 Call button 3 Micro USB charging port 4 Power button 5 LED indicator light Stowing the headset 5
Summary of the content on the page No. 6
Headset Controls 1 2 3 4 5 1 Volume/Mute button Increase/Decrease volume Tap + or – button to adjust listen volume Mute/Unmute mic during a call 1-second press of both + and – buttons 1-second press of both + and – buttons Pause/Play audio 2 Call button Answer or end a call (PC or Mobile) 1 tap Redial 2 taps 2-second press until tone heard Initiate mobile phone’s voice-dialing* 1 tap Reconnect lost connection * Feature not supported by all mobile phones 3 Micro USB charging port 90 minutes for f
Summary of the content on the page No. 7
Charge Your Headset Charge your headset before using. Plug in your headset and charging time place on a flat non-metallic surface. The Smart Sensors in your 30 min ........................... headset fully calibrate while charging. When fully charged the LED Minimum charge before first use goes off. 1.5 hours .......................... NOTE Always charge at near room temperatures; never charge Full char ge battery at temperatures below 0ºC (32ºF) or above 40ºC (104ºF). Check Batter
Summary of the content on the page No. 8
Fit your Headset Fitting the Headset The headset comes configured for the right ear, with the medium eartip installed, however you can replace it with the small or large eartip provided or configure the headset to fit on the left ear. For the best sound clarity and comfort, make sure you have a secure fit. Replace the eartip for a better fit 1 Grip the eartip and gently push it into the speaker housing. 2 Rotate it a quarter turn to the left to unlock. 3 Pull the eartip away from the headset.
Summary of the content on the page No. 9
Quick-turn Adjustment for the left ear 1 Pivot the boom into an upright position. 2 Rotate the boom and speaker to the other side of the headset and lower it before fitting your other ear. 1 2 Accessories and replacement parts You can order additional accessories and replacement parts here: www.plantronics.com/accessories 9
Summary of the content on the page No. 10
Pairing your Bluetooth USB Adapter Initial Pairing Your Bluetooth USB adapter comes pre-paired to your Voyager PRO UC headset. To Re-Pair your Bluetooth USB Adapter In the event that your headset and Bluetooth USB adapter are not paired or become unpaired do the following: 1 Start with the headset powered off. 2 Remove the Bluetooth USB Adapter. 3 Place the headset in pairing mode by pressing and holding the power button until the headset LED flashes BLUE/RED. 4 Insert Bluetooth USB adapte
Summary of the content on the page No. 11
Connect PC 1 Power headset on. 2 Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn solid blue to indicate the headset is connected to the PC. The LED remains solid blue when not on an active call. NOTE Do not insert directly into a docking station or hub. NOTE It is normal to see the LED flash at startup before connection is established. 3 Ensure Microsoft Lync/Office Communicator is running on your PC. 4 Check your Audio Settings. Confirm the spea
Summary of the content on the page No. 12
PC Audio Setup for Windows XP (To reach this screen: Start > Control Panel> Sound and Audio Devices) Default Setting: All PC sounds and audio is played in the headset. Alternative Setting: All PC sounds played through your PC speakers and communication audio is played in your headset. Bluetooth USB Adapter LED indicators None Headset powered off Paired/connected Solid blue Active call Flashing blue Flashing blue Audio 12
Summary of the content on the page No. 13
Use Your Headset with Microsoft Office Communicator Powering Headset On/Off The headset will be ready to use once it has been charged as described in Charging your Headset. To power the headset on press and hold the Power On/Off button for two seconds. The headset indicator light will remain solid blue for two seconds to confirm that the headset is powered on. Indicator Light Power On/Off Button NOTE The Bluetooth USB adapter indicator light will remain solid blue when the headset is powered
Summary of the content on the page No. 14
Call Button Behavior with PC and Mobile Connected (not on a call) Open Microsoft Lync/Office Single tap Communicator with dialtone Redials last number on Double tap mobile phone Starts voice dialing on Hold call button for 2 seconds mobile phone NOTE You can also answer calls directly from Microsoft Lync/Office Communicator by clicking on the Call Alert that appears on your PC screen. In this case the call will be directed to the default speakerphone which may not be your headset. Consult Mi
Summary of the content on the page No. 15
Pair Mobile Phone and Call 1 Ensure your headset is fully charged. Press and hold the power button on the headset until the indicator light flashes red and blue. The headset is now in pairing mode. NOTE If you don’t see the red and blue flash, press and hold the power button to turn your headset off. Then press and hold the power button again until you see the red and blue flash. The headset will stay in pairing mode for ten minutes. 2 Activate the Bluetooth feature on your phone, then use the
Summary of the content on the page No. 16
Placing a Call with your Headset and Bluetooth Mobile Phone To place a call Dial number on your mobile phone keypad. Redial last number* Double press call button. There will be a double low tone on each press. A final tone indicates the last number has been redialed. Activate voice dialing* Press and hold call button for two seconds. First tone on key press start followed by a second tone which indicates voice dial is activated. * Only available on mobile phones that support these features. An
Summary of the content on the page No. 17
Advanced Features Smart Sensor Features Smart Sensors detect whether or not you are wearing the headset. Sensors are located in the earloop and the speaker. Auto Answer Call: When you have an incoming call on your mobile When you are not wearing or softphone, put on the headset and the call your headset. will be answered automatically. You do not have to press the call button. Auto Pause Media: When you are listening to audio from your mobile phone or PC, remove the headset and the When y
Summary of the content on the page No. 18
Listening to Audio via A2DP (Advanced Audio Distribution Profile for Bluetooth) Your Voyager PRO UC headset can play media files (music, podcasts, etc.) from any A2DP- enabled mobile device. Play/Pause You can pause/resume your music from the mobile phone by depressing and holding the headset’s volume + and – keys simultaneously until you hear a tone. Also see Auto Pause Media in the Smart Sensor Features table. 18
Summary of the content on the page No. 19
Headset Controls, Indicators and Voice Prompts Action Indicator Light Tone Voice Prompt Power On/Off Press Power/Off On: solid blue for On: ascending On: “Power on” button 2 seconds tone followed by a voice 2 seconds prompt detailing Off: solid red for Off: descending battery status. 2 seconds tone Off: “Power off” Check if headset is Short press Short blue flash None powered on call button or volume + or - button Incoming call alert None Flashes blue Three single low tones Call answer
Summary of the content on the page No. 20
Optional Plantronics Software Optional Plantronics software must be downloaded to access the Plantronics Control Panel. Load Plantronics software by visiting www. plantronics.com/software and click on the download button. Plantronics Control Panel If you have chosen to download and install the optional Plantronics software you may make changes that affect the performance of your headset by using the Plantronics Control Panel. To start this utility, click Start > Programs > Plantronics > Plan
