Summary of the content on the page No. 1
EZ CARD 10/100/1000
EZ Connect N
32-bit 10/100/1000Mbps Gigabit Ethernet PCI Adapter
Draft 11n Wireless USB2.0 Adapter
SMC9452TX-2
Summary of the content on the page No. 2
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2008 by SMC Networks, Inc. 20 Mason Irvine, C
Summary of the content on the page No. 3
Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicab
Summary of the content on the page No. 4
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TEST
Summary of the content on the page No. 5
Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no
Summary of the content on the page No. 6
power supply: ±1 kV, Data/Signal lines: ±0.5 kV) • Surge immunity test according to EN 61000-4-5:1995 (AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV) • Immunity to conducted disturbances, Induced by radio-frequency fields: EN 61000-4-6:1996 (0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Power frequency magnetic field immunity test according to EN 61000-4-8:1993 (1 A/m at frequency 50 Hz) • Voltage dips, short interruptions and voltage variations immunity test according
Summary of the content on the page No. 7
Veuillez lire à fond l’information de la sécurité suivante avant d’installer le Device: AVERTISSEMENT: L.installation et la dépose de ce groupe doivent être confiés à un personnel qualifié. • Ne branchez pas votre appareil sur une prise secteur (alimentation électrique) lorsqu’il n’y a pas de connexion de mise à la terre (mise à la masse). • Vous devez raccorder ce groupe à une sortie mise à la terre (mise à la masse) afin de respecter les normes internationales de sécurité. • Le coupl
Summary of the content on the page No. 8
nur gegeben, wenn auch die an das Gerät angeschlossenen Geräte unter SELV-Bedingungen betrieben werden Stromkabel. Dies muss von dem Land, in dem es benutzt wird geprüft werden: Dieser Stromstecker muß die SEV/ASE Schweiz 1011Bestimmungen ein- halten. Das Netzkabel muß vom Typ Europe HO3VVF3GO.75 (Mindestan- forderung) sein und die Aufschrift oder tragen Der Netzstecker muß die Norm CEE 7/7 erfüllen (.SCHUKO.). Warnings and Cautionary Me
Summary of the content on the page No. 9
Achtung: Installation und Deinstallation des Gerätes müssen von qualifiziertem Servicepersonal durchgeführt werden. Achtung: Wenn das Gerät an eine Steckdose angeschlossen wird, muß der Masseanschluß n Netzstecker mit Schutzerde verbunden werden, um elektrische Gefahren zu vermeiden.
Summary of the content on the page No. 10
Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means: • Adherence to national legislation and regulations on environmental production standards. • Conservation of operational resources. • Waste reduction and safe disposal of all harmful un-recyclable by-products. • Recycling of all reusable waste content. • Design of products to maximize re
Summary of the content on the page No. 11
Package Contents The following items should be found in your box: One 10/100/1000Mbps Gigabit Ethernet PC Adapter One Resource CD, including • Drivers • User Guide • Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor for assistance.
Summary of the content on the page No. 12
CONTENT Chapter 1. Introduction............................................................................................ 1 1.1 Convention ......................................................................................................... 1 1.2 Product Overview ............................................................................................... 1 1.3 Main Features .................................................................................................... 2 1.
Summary of the content on the page No. 13
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Chapter 1. Introduction Thank you for choosing SMC9452TX-2 Gigabit PCI Ethernet Adapter. 1.1 Convention The Adapter or SMC9452TX-2 mentioned in this User Guide stands for SMC9452TX-2 Gigabit PCI Ethernet Adapter. 1.2 Product Overview SMC9452TX-2 is a highly integrated and cost-effective single-chip Gigabit Ethernet Adapter that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3 10Base-T, IEEE80
Summary of the content on the page No. 14
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 1.3 Main Features Integrated Ethernet MAC, Physical chip and transceiver in one chip Complies with the IEEE802.1P, IEEE 802.1Q, IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE802.3ab 1000Base-T standard Compliant to PCI Revision 2.1/2.2 Supports Full Duplex Flow Control (IEEE 802.3x) PCI local bus single-chip Ethernet controller Supports ACPI, PCI power management Supports Auto-Negotiation func tion, Auto-detects network
Summary of the content on the page No. 15
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Chapter 2. Installation 2.1 Hardware Installation To install the adapter, follow these steps listed below: Step 1: Turn off your computer and unplug the power cord and all cables. Step 2: Remove your computer’s case cover. See your computer’s user guide for information about removing the cover. Step 3: Locate an available PCI slot. PCI slot are usually white. Step 4: Remove the screw that secures the back plate (the small piece of meta
Summary of the content on the page No. 16
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 2.2 Software Installation In this User Guide, we will take the driver installation in Windows XP for example, which is similar to the driver installation procedures for the other operation systems. 2.2.1 Install driver for XP Step 1: After you insert the Adapter in the computer firmly, the Operating System will automatically recognize it, then the “Welcome to the Found New Hardware Wizard” screen will appear (shown in Figure 2-2). Sel
Summary of the content on the page No. 17
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Step 2: Select Install from a list or specific location (Advanced) as shown in Figure 2-3, and then click Next. Figure 2-3 Step 3: Select Don’t search. I will choose the driver to install as shown below. Then click Next. 5
Summary of the content on the page No. 18
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Step 4: Select Show All Devices as shown in Figure 2-5, then click Next. Figure 2-4 Step 5: Click Have Disk… in the next screen Figure 2-6. Figure 2-5 6
Summary of the content on the page No. 19
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Step 6: After that, select Browse… as shown in Figure 2-7 to locate the driver in the next screen. Figure 2-6 Step 7: Locate the appointed driver as shown in Figure 2-8, click Open. Figure 2-7 7
Summary of the content on the page No. 20
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide Step 8: After that, you will see the next screen (shown in Figure 2-9), click OK. Figure 2-8 Step 9: Select the model of the Adapter as shown in Figure 2-10, then click Next. Figure 2-9 8
